Petrochemicals.
Plastic and Petrochemicals..
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use
Petrochemicals.Consultancy
Dear Buyers, We are dealing with supplying of Carbon Anode Blocks (FC-95%) from GCC countries in Bulk Quantity.
CARBON CATHODE BLOCK AVAILABLE POL- JEBAL ALI QTY - 5000 MT PER MONTH FC- 85% LOADING PER CONTAINER - 25 MT SIZE - 1- 40MM - 80 MM 2- 150MM -500 MM
Carbon Anode Scrap for Sale Qty - 50000 MT POL - Saudi, Bahrain Payment Terms - 100% Advance Loading period - Within 7 days after order confirmation. Minimum order Quantity - 10 Containers Fixed Carbon - 95-98% Sizw - 100-600 mm
Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.
Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.
HiraChem is your specialist supplier of Granular Activated Carbon. Pure carbon which is gold recovery granular activated carbon is coconut-shell-based granular activated carbons specially designed for gold recovery operations. GR was developed to be a consistent, high performance, high activity gold recovery carbon product line. The activated carbon's ability to achieve high gold loadings and the relative ease with which they can be stripped enables gold processors to obtain the highest possible yields from ores with high silver/gold ratios, carbonaceous ores and ores containing other metals that complex with cyanide; for example, copper and nickel. In Carbon in Leach (CIL), Carbon in Pulp (CIP), and Carbon in Column (CIC) circuits, it is essential that the activated carbon employed provides excellent process performance, minimal losses due to attrition, and minimal maintenance problems. Through the years, Pure carbon has continually upgraded its manufacturing processes to ensure that it continues to provide high quality products. Steps have been added to the manufacturing process which have improved the carbon's resistance to abrasion and reduced its tendency to plug retention screens in adsorption tanks. Platelets (flatter granules which are relatively long and wide while not particularly thick) can end up oriented in such a manner that they pass through the retention screens. This results in a loss of gold-containing carbon, which directly affects percent recovery and pro stability. In order to have a product that has less tendency to plug screens with "platelets," GR is also processed through a vee-wire screen and deÃ?Âdusted. GR products are manufactured specifically for gold adsorption. As a result, the quality of the carbon is extremely consistent and tailored to gold recovery applications. GR activated carbon enable the extraction of even trace amounts of gold from every ton of ore, even when processing average or low-grade ores. Pure Carbon expertise in activated carbon application technology is a valuable resource for designing and optimizing.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility. As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentally responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation.
Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Type: Activated Application: Water Purification Color: Black Product Details Purity : 99% Form : Powdered Hardness : >90% Features & Benefits Powdered activated carbons (PAC) are defined by the ASTM as particles passing through an 80-mesh sieve (0.177 mm) and smaller. CG Carbon manufactures many types of powdered activated carbon products, each specifically engineered to provide a unique pore structure and adsorption properties. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions. The adsorptive capacity of CG Carbon's powdered activated carbon (PAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. With efforts to be environmentally responsible, CG Carbon can reactivate spent Granular Activated Carbon (GAC) through thermal oxidation to make react PAC. Cg Carbon backs its products with comprehensive analytical support including feasibility studies and cost evaluations, together with complete system design, service, and troubleshooting. Customers get the expertise of an industry expert in powdered activated carbon backed by a commitment to service one can trust
30 - 60 Mesh Granular Coconut Shell Activated Carbon Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Shelf Life: 12 Months Color: Black Processing Type: Sun Dried Purity: 100% Form: Granules Size: 30 - 60 Mesh The manufacturing has very sophisticated control over each aspect of the Activated Carbon produced, such as, : Particle Size (as specified by ASTM, BS, JIS & AARL) Particle distribution (across meshes) Activity (as measured by CTC, Butane or Iodine index) Density Hardness Ash content Impurity level (controlled through a number of standard washing processes) Features & Benefits The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions
8X30 Mesh Granular Coconut Shell Activated Carbon Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Shelf Life: 12 Months Color: Black Processing Type: Sun Dried Purity: 100% Form: Granules Size: 8 - 30 Mesh The manufacturing has very sophisticated control over each aspect of the Activated Carbon produced, such as, : Particle Size (as specified by ASTM, BS, JIS & AARL) Particle distribution (across meshes) Activity (as measured by CTC, Butane or Iodine index) Density Hardness Ash content Impurity level (controlled through a number of standard washing processes) Features & Benefits The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions.
12X30 Mesh Granular Coconut Shell Activated Carbon Minimum Order Quantity:1 Accept Small Orders: No Country Of Origin : India Business Type: Manufacturer, Exporter, Supplier Shelf Life: 12 Months Color: Black Processing Type: Sun Dried Purity: 100% Form: Granules Size: 12 - 30 Mesh The manufacturing has very sophisticated control over each aspect of the Activated Carbon produced, such as, : Particle Size (as specified by ASTM, BS, JIS & AARL) Particle distribution (across meshes) Activity (as measured by CTC, Butane or Iodine index) Density Hardness Ash content Impurity level (controlled through a number of standard washing processes) Features & Benefits The adsorptive capacity of granular activated carbon (GAC) makes it ideal for removing a variety of contaminants from water, air, liquids and gases. GAC is also an environmentally responsible product that can be reactivated through thermal oxidation and used multiple times for the same application. By varying manufacturing conditions, internal pore structures are created by imparting unique adsorption properties specific to each product type. The choice of product for a specific application will vary due to differing impurities and proprietary process conditions
