Used paper rulling industries.
Introduction: The tester is applying to test the thickness of flat sheet specimens. It measures up to the standard of paper and cardboard thickness testing method---iso534, iso438, gb/t451.3 and gb/t1938. Technical characters: 1, measure range: 0-18mm 2, accuracy: 0.001mm 3, measuring area: 200mmª 4, pressure: 100 kpa, 5, value error: ª2.5um or ª0.5% 6, dimension: 80+120+120 (mm) 7, weight: 2.5kg Plywood carton
Introduction: The tester is designed according to iso 1974(paper--tearing strength test method), gb455.1, it is mainly used for paper tearing strength test as well as cardboard low-tearing strength test. It can test automatically, lcd displays data. The tester is incorporated with mechanize and electrization. Its micro-control system adapts to the high precision photoelectric axial coder and micro-control digital circuit which make the man-machine conversation come true. The advantages: advanced technology, complete functions, steady capability, simple operation, etc. Technical parameter: 1. Range: 10mn~1000mn 2. Tearing arm: 104fa1 (mm) 3. Beginning angle for tearing: 27.5ffa0.5f 4. Beginning cutting length of specimen: 20fa0.5 (mm) 5. Dimension: 450 (l)f¯310 (w)f¯465 (h) (mm) 6. Weight: about 15kg Plywood carton
Introduction: The meter is widely applied in papermaking, fabric, printing, plastic, ceramic and porcelain enamel, construction material, chemical industry, salt making and other testing department. It is used to test the whiteness, yellowness, color and chromatism of specimen·+as well as transparency, opacity, light scattering coefficient and light absorption coefficient of paper. Plywood carton
The chippers are used for cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of flakeboard, fiberboard and paper pulp. The chipper is composed of machine base, rotor, upper and lower feed rollers, feeding belt conveyer, hydraulic system, etc.
This series of machine are suitable for wood chips preparation in the paper pulp, and wood-based panel industries, as well as the chip production bases, by which logs and small wood are cut into high quality chips with even length, smooth chip cut and uniform chip thickness. It is also possible for the chipping of branches and twigs, as well as planks, etc. The chipper consists of frame, knife disc, feed and discharge spout, hood and electrical control system, etc.
The knife-roll straw cutters of this series are applicable to the pulp making company; they are used to chip the rice straw, wheat straw, kenaf whole stalk and some other raw materials. The feed part can drive separately, and can positive rotation and reverse in order to avoid chocking. The knife roll adopts rolling bearing, so is convenient in operation and maintenance. And the cutters can be divided into right hand machines and left hand machines according to the client's demand.
The chippers are used for cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of flakeboard, fiberboard and paper pulp. Many models of this machine, and every one has the different size, weight and dimensions.
The main disposition of sqzk-920 program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device The belt refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system.
The main disposition sqsk-920 numerical control paper cutting machine main disposition The chrome-plating work table, brings the air cushion electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system
The main disposition of sqzk-920tm program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and Italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system The Japanese Mitsubishi exchanges the digit servo-control technology Demonstration (label, equal parts, trimming, calculator, machine establishment, preservation) function
This series of machine is used to cut the paper roll into paper sheets. It adopts advanced technology of British and it is driven by AC servo motors, the high cutting speed reaches 300 cuts /min. And it can cut 8 paper rolls at one time. It is also equipped with automatic deflection rectify and antistatic device. The paper feeding and delivering units are automatic with the hydraulic system. The human and machine interface system could make operation become much easy and more convenient. Model: CHM-1400/1700/1900 Main specifications: weight of paper: 60-550gsm Cutting accuracy: 0. 5mm tolerance allowed Max. Cutting speed: 300sheets/min, operation speed depends on cut length, paper quality, paper grade&grammage. Max. Cutting meter speed: 300m/min Cutting length range: 450-1450mm Max. Diameter of reel: 1800mm Sheet stack height: 1300mm Max. Width of cutting paper: 1400mm/1700mm/1900mm Main work sections: Cutting section: 1. Computer operation interface, easy to operate. 2. High precision special alloy steel knife 3. Cutting accuracy is 0. 5mm tolerance Paper feeding section: 1. Double limbs oil pressure shaftless paper rack 2. Auto tension control system 3. Auto paper edge guiding system Electric control section: 1. PLC control system 2. AC servo driving motor 3. High precision encoder&cutting 4. Long endurance Slitting knife: 1. Three sets of slitting knives 2. Used for trimming and middle slitting Paper conveyer system 1. The number of overlapping sheets can be adjusted by this section. 2. The single sheet outlet can be adjusted. CHM-1400:12000kg CHM-1700: 13000kg CHM-11900: 14000kg.
This series of machine is used to cut the paper roll into A4 size paper and wrapping it. Model: CHM-A4-4 Main specifications: Paper Width: Gross width 900mm, net width 840mm Cutting numbers: 4 cutting-A4 210mm (width) Diameter of: Paper roll: Max. 1200mm. Min. 600mm Diameter of: Paper core: 3 or 6 inches or depend on the demand of clients Paper weight: 60-100gsm Sheet length: 297mm Ream amount: 500 sheets. Height: Max.62mm Max. Speed of production: 120m/min(depend on different paper) Max. Numbers of cutting: 404cutting/min Output of the ream: 3.2 times/min Load of cutting: 400gsm Cutting accuracy: about 0. 2mm Cutting requirement: constant speed, no break in reel, cutting all paper one time , eligible paper. Drive: AC frequency conversion and step-less Main power supply: 3*380V AC, 50HZ Voltage: 220V AC/ 24V DC Power: 32KW Compressing air consumption: 300NL/min Air pressure: 6 bar Edge cutting: 2*10mm Optional parts: Auto wrapping system CHM-A4-4: 17000kg.
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance. The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly. The paper feeding accuracy of paper location can reach 0. 001mm around. Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation. The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring. The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient. Model: CHM-92CD/115CD/137CD Main specification: Cutting width: 92cm/115cm/137cm Paper feeding depth: 92cm/115cm/137cm Master power: 3kw/4kw/4. 5kw Min. Paper-weight pressure: 150dan Max. Paper-weight pressure: 4000dan/4500dan/5500dan Cutting accurancy: 0. 2mm tolerance. Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm Cutting speed: 45cuts/min Voltage: 360-400V. Packing dimension: 92CD: 225*140*191cm 115CD: 275*140*200cm 137CD: 295*140*200cm.
This production line is uesd to produce 3 ply, 5 ply, 7 ply corrugated cardboard. Its production speed can be chosen from the following:40m/min, 60m/min, 80m/min, 100m/min, 120m/min, max. Paper width:1600mm, 1800mm, 2000mm.
Single facer
The yp-30c book core flatters pattern code number is composed of product range (dominant mode number) and the specification code number (auxiliary code number) Yp is the pattern code number, y indicated that presses (strength), p expresses evenly (entire), 30 is the specification code number, expresses the rated pressure. Yp-30c expressed that this company produces the third kind of model (hydraulic pressure), and full title is yp-30c hydraulic pressure book core flattening mill. The main application and applicable scope of yp-30c book core flatter The yp-30c book core flatter mainly uses in the paper product í«s book core presses, fagoting, guaranting presses and so on ú¿such as books, magazine, books and periodicals, exercise book) And may also widely use in other being probable to carry on with the pressure guaranteed that presses the even product the suppressed work.Such as the pressure and the solidification after the guarantees of lumber, plywood, rubber products and so on. It can substitute the tremendous pressure similar import products. And it caní»t use in material quality suppressions like steel plate, copper stock and so on.
1.This a4 paper cutting machine adopts the servo motor (or stepless motor) to control the fixed-length cutting, feeding.It is equipped with the photoelectric, correction, tracing modifying system. It can do crosscutting and vertical cutting at the same time.And it can trace feeding institution with the products, blowing& absorbing transportation at same time, automatic collecting, robert automatic folding materials and cross transport to worktable. 2.Drive system use pneumatic system, photoelectric sensor to control, folding materials system use oil pressure to improve equipment..This machine integrates photo electric, liquid and gas as a whole, plc touching screen, and has the features of easy operationhigh-precision cuttingstate operation and low noise. 3.The machine has the feature of the motor frequency speed adjustment, automation counting, giving an alarm when stop and tension with digital indication. 4.All transitional rollers can be done in clients opinions to avoid surface injure. 5.This machine is very important to scratch of gloss photo paper. wooden case
JBZ-300 paper plate forming machine is developed and designed as the requirement of market. It is pneumatic type automatic paper dish forming machine with owned unique libellant property right, which has functions as automatic paper feeding, forming, dish ejecting, temperature constant controlling, automatic counting, fast working speed, safe operation and easy maintenance, etc. This machine have two working station, two molds installed in the machine, you can produce two sizes paper plates in the same time or let the two molds the same to get double speed. Package size 1580*1230*1900.
JDGT Cake tray forming machine use machine hand to clip paper, feeding paper, separate paper, punching, discharge etc. This model can make different size of cake tray through changing mould. Simple structure, inverter, auto temperature controller, easy to operate, high efficient, stable running. Technical specification:- Model: JDGT Paper size: ¼+55-¼+130mm Raw material: Oil-protect paper 30-40gsm Capacity: 15-20pcs/time 20-40times/min. Power source: 380V / 50HZ ( it can be changed if customer require) Total power: 2.5KW Air source: working pressure 0.6MPa air volume 0.3m3/min. Weight: 500kg Package Size: 1500f-1300f-1400mm.
