Plastic-sprayed aluminum alloy accessories
Product description:
1. Install PU Sandwich wall panel/Metal carved board/Metal siding wall panel.
2. Beautiful, easy to install, durable material, seamless, no rust.
3. Color no change, strong strength, lightweight.
4. Plastic sprayed aluminum alloy material.
Installation:
Step 1: Preparation
When the metal carving board and its accessories are ordered to the site, you need to prepare the installation of the plate and accessories tools, mainly expansion screws, dovetail nails, pistol drill, gas nail gun, marker, tape measure, rubber hammer, and cutting machine.
Step 2: Install the accessory base
Before installing a metal carved plate, the base of plate accessories should be installed first. There will be starting parts, closing parts, edges, seams, and internal and external corners.
Step 3: Install the plate
after installing the base of the accessories, then install the first piece of metal carving board horizontally from top to bottom, and all the plates must be female mouth down male mouth up. after the first piece of plate is installed with a screw or nail dovetail should be fixed on the wall (suggest every 60 cm distance is fixed a nail), then the mother of the second board mouth to aim at the first board of the mouth and down tight, at the same time with a rubber hammer of tapping two boards interface to ensure that the joint of two boards enough heads, The second board can then be fixed to the wall with expansion screws or dovetail nails, and the other boards can be installed in the same way.
Step 4: Install the fitting cover
after all, the metal carved plates are installed, press the cover plate of the fitting firmly on the base. If it is the same material accessories, you can use screws fixed on the wall, and finally sealed with waterproof glass glue.
Three Color Bluestone Brick PU Sandwich Wall Panel
Product description:
the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof.
the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate.
Structure:
Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade.
Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane.
Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect.
Advantage:
1. Heat preservation and heat insulation
2. Fire and flame retardant
3. Waterproof and moisture-proof
4. Sound insulation and noise reduction
5. Efficient construction
6. Environmental protection and durability
7. Shock resistance and crack prevention
8. Strong decoration
Environmental protection and safety, rich performance, simple and fast installation, low transportation cost, bendable, fireproof, waterproof, Super-duper thinness and lightness, it has morre development space than traditonal materials. It applies to interior and exterior wall.
Heating Element
Carbon Crystal
Front/surface
white PET or aluminum plate, or UV print customized image
Back
Aluminum alloy hang brackets
Frame
aluminum alloy frame(white,silver or black color),ABS,High Imitation Wood
Cable
1m to 3 meter power cable with different standard power plug
Voltage (v)
220V-240V,50HZ or 110V-120V,60HZ
Size(mm)
600*1000,600*1200 or as required
Power(w) &161;10%
300w-1200w
Heat transfer
98%
Panel temperature
60&161;&230; --- 80&161;&230;
Thermostat control
-5 &16 --- 40 &161
Service Life
100,000 hours or 50 years
far infrared heating panel
Normal size: 60*100*1.2/2cm,
6pcs/CTN
CTN size:108*60*20cm
80pcs / cubic meters
20GP : about 1200 pcs
Place of origin: zhejiang, china (mainland)
Brand name: crowne
Model number: cp-10
Material: pvc
Thickness: 3.8mm size: 2440*1220*3.8mm
Packaging & delivery
Packaging details:Carton or pe film
Delivery detail:15days for 40hq
Cheap price haining uv wall panel high glossy uv coated board interior decorative wall panel
1. Price :cheaper & lighter than marble, but is is same as marble
2. Easy installtion, low price, fireproof, environmental friendly.
3. For interior wall and wall only.
4. Widely used in residencial place: living room, kitchen, washing room, bedrooms.
5. Widely used in commercial place: hotel, office, school, subway, laboratory.
Zhongshengs frp carriage plate with width of less than 3meter adopts neopentyl glycol m-benzol gel coat, featuring good water resistance and weather fastness, catering to the demands of both domestic and foreign refrigerated truck carriage and dry cargo container truck carriage plate. The product adopts a sandwich structure, with the outer layer made from frp plate covering, middle layer made from high-density polyurethane foam material, thermal-protective coating with a thickness of 50-100mm, the surface plate with a thickness of 1-3mm, creating excellent heat-shielding performance.
Application:
The product is widely used in refrigerator van, rv, , temporary office, sentry box, etc.
An ideal frp sandwich panel
PVC wall panel Anpro brand:
1.Material: Polyvinylchloride(PVC), Calcium Carbonate, and other additives.
2. Patterns and Size: A large number of designs and sizes are available and customizable according to any your requirement (OEM)
3. Features: water proof, fire-resistance, easy installation, high intensity, aging resistance, easy to clean, environment friendly, light in weight
AnPro is a brand specializing in High Tech Plastic Building Materials of An Phat Group (APG), which is co-operated with Germany partner: BASF- the global largest chemical.
PVC wall panel Anpro brand is manufactured in Vietnam. PVC wall panel is made of rigid PVC, nano CaCO3, additives like Titanium, CPEâ?¦etc. Cost effective, easy to install, and DIY friendly by using the interlocking tounge and groove egde design. The width of wall panel from 300 to 600 mm means that user can install more wall space in less time and less effort.
Certification: SGS test report, compliance with SEDEX regulation as validate as SMETA, BSCI or SA8000
ISO 1400 for environmental management system
ISO 9001 for quality management system
OEM available
Fire resistance
rock wool sandwich panel can withstand more than 1000°C without melting, whereas the binding agent is lost at temperatures in excess of 250°C. When the temperature rises above 250°C, the binder will evaporate in the zone which is exposed to 250°C or more. But the fibres will remain intact as their inbuilt cohesiveness and layering will keep the fibres together, ensuring that the material will retain its rigidity and protect the material beneath it from being affected by the fire.
Since mineral fibres are highly resistant to temperature variations, rock wool sandwich panel can be used under conditions of very high temperature, provided that it is installed in such a way that mechanical stress will not alter its shape when the binder evaporates.
Sound Insulation
rock wool sandwich panel is by its basic engineering the perfect material for the purpose for adding value for the customers. Very often installations of BRD Group products will supply an additional improvement in sound wellness. Within the BRD Group great focus and development is ongoing in the field of sound design and noise reduction. BRD Technical Insulation can supply the possibilities for true value adding for important markets as Cruise Liners and Offshore living quarters. BRD Thermal and Acoustic insulation go hand in hand. Fire Protection solutions and Acoustic insulation matches each other perfectly. Special rock wool products for i.e. marine panels deliver exceptional performance in combination of mechanical strength, fire properties and noise reduction. Dedicated noise reduction systems where rock wool products are Combined with other materials to create a sophisticated high-end solution for maximum dampening effect.
Control: Automatic with remote cotroled
Height: 435mm, 485mm, 535mm
Open Style: Automatic, Manual
Handware: With all handware
Features: Heat insulation, high safety
Sealing: With full sealed, weather resistance & well protection & soundproof.
Certification: ISO & CE & TUV certificated
BRDECO garage door adapt to the connection type as shown in the figure, to make the internal between panels and doors more steady, anti-pinch hand protection system can protect your fingers from wounded.
Tighting sealing to make the inner more clear, and induction the insects coming.
THERMALLY EFFICIENT
Built to withstand the extreme rigours of the winter climate, weâ??ve integrated the most energy efficient components to protect you from the wind and the cold during winter, and keep you cool during summer.
RUGGED AND DURABLE
Intelligent and functional design solutions coupled with superior quality materials and a certified installation network make your Garaga door system a solid investment for years to come.
REFINED DESIGN
Developed by a team of specialized designers, every one of our models is detail-oriented, reflecting an authentic and specific style designed to match your homeâ??s distinct architecture, up close and at a distance.
Polyurethane sandwich panel mat erial from the upper and lower color steel plate with a middle foamed polyurethane composition, it has six components online world advanced automatic operation of mixed casting technology, can mix process online complete social ingredients center or factory, and can be freely adjusted according to the temperature on-line,so as to produce the building sheet out of the ordinary high strength, energy-saving, green environment protection.
The roof panel is manufactured in accordance with a patented system by China Wing. It consists of a profiled external steel sheet and an internal micro-ribbed steel sheet, with an insulation core of high-density PU foam. The high-density PU foam completely fills the space between the metal facings.
China Wing wall panels are made of composite panels that are formed by two metal sheets and linked by a layer of insulating material â?? PU foam. Panels are manufactured in 1000 mm wide modules, their length depends on the specific design requirements and the feasibility of the manufacturing factory. China Wing panels are designed to provide a high-performance panel interface with high flexibility.It is widely used for industrial, commercial, warehouses and public buildings and it also can be used as the internal building partition. We offer reveals with a width of 12.5mm and width with 800/900/1000mm to accommodate nearly any design requirements.
Features:
1.Grooved Wooden Acoustic Panel is manufactured from 100% polyester fibers and does not contain chemical binders including formaldehyde.
2.Grooved Timber Wooden Acoustic Panels products contains a minimum of 75% previously recycled polyester fiber (from PET bottle flake)ensuring comparatively low embodied energy.
3.Its polyester non-woven surface is easy to be bonded and fit for most kinds of surface sheet.
4.Absorb reverberated sound, providing acoustic control to lessen the amount of noise in a room
5.Protect and adorn your walls, providing high-impact wall protection while serving as a viscous surface, giving the same functionality as a bulletin board without sacrificing aesthetics
6.Easy-to-install, cuts, fastens, and paints easily, less maintenance, more life;
7.It is widely used for acoustic walls, acoustic ceilings, computer rooms, TV station, gymnasium, theater,office, cinema, church, hospital etc.
8.the aluminum acoustic sound panel is Mosquito proof, moth proof, anti-corrosion, anti mildew, formaldehyde free, no deformation, against collision well, easy to maintain, simple installation.
Our service:
1.Welcome OEM or ODM as customer's request(We have three designers for customized).
Â
2.Excellent after-sales service for long-term cooperation but not one-time job.
Â
3.Take responsibility for any quality issue caused by production.
Â
4.Take serious quality control,supply QC report to clients before deliver.
Â
5.Offer new item samples within 1-2 days and quickly production time.
6.All our products meet the standard of different country,Especially European,Australia,USA and Canada marketing.
7.All of the samples are for free.
Common Applications:
1.studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects.
2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location.
3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects.
4.air-port, railways, bus-stops, workshops and more noise reduction projects.
About us:
Guangzhou Bunge Building Decoration Engineering Co.,Ltd is a professional company in manufacturing Movable Partitions.It also artistically designs and carefully does research and development,.The company has adopted the advance partition technology of USA,Germany and Denmark.We have professional staff with more than 10 years of experience in design,production and installation.
