NEO ENAMEL Paints are based on the alkyds/drying oils which have hard films with gloss retention. The films show excellent brushing properties and very little tendency to yellowing on exposure to the environment. Products are carefully designed keeping the pigment volume concentration to get optimum gloss, washability, adhesion and durability. The product dries at room temperature by oxidation and polymerization. NeoSyntheic Enamels are used on various substrates like wood , metal furnitures, train coaches, automobiles industries etc. NEO ENAMEL products are available in 2 varieties :
I GLOW Hi Gloss Enamel.
X 2 General Purpose Enamel.
DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.
USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces
BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable
PACK SIZE 1 litre, 5 litres
COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart
PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint
PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion
PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.
RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT
PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.
PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit
Metal cutting fluid In actual production, even high-quality metal cutting fluids must be added with a certain amount of bactericidal and algae-removing agents to extend the service life and increase the utilization rate. PSC80626, whether used as a metal cutting fluid additive, a settling agent or a water-based cutting fluid, can accelerate the sedimentation of metal chips, accelerate the separation of water and oil in the cutting fluid, effectively reduce the growth of bacteria, and extend the life of the metal cutting fluid. PSC80626 is used in fully synthetic metal cutting fluids for water machines, and the amount is very small, and the additive formula can be adjusted flexibly. As a settling agent, it is basically consistent with Buckman's Busan 77 in terms of theoretical map test data, which can completely replace this type of product and has a significant effect in actual use.
We would like to introduce Awesome paints which has come a long way ever since it's establishment in the year 2014, and has established a strong foothold in the market. We have come to be recognized as an eminent importer, exporter and consultant of Acrylic washable Distemper (water base no VOC paint).
Made using superior quality raw materials our products are meet with international standards.
Export business is one of our prime objective and we are exporting our products WORLDWIDE.
Now, we are focusing to develop business in GLOBLE MARKET Being our valuable representative in GLOBLE MARKET, we need your help / support to establish new trade relationship with GLOBLE MARKET. So we request you to kindly provide us details of the buyers, importers, wholesale
rs and traders of our above mentioned product to communicate with them and to establish new business relationship.
We are forwarding below our company details for your kind reference.
Company Profile
Business Type:
Exporter
Primary Competitive Advantages:
Standard Product Quality
Competitive Price
Delivery on Time
Customer Oriented Approach
Year of Establishment:
2014
Export Markets:
Russia, Kuwait, Nepal, Middle East, European Union, USA, Africa and Pakistan (Spreading Services Speedily)
OEM Service Provided:
Yes
Annual Production Capacity:
60lakhs and more per month
Product Range:
Acrylic washable distemper with different size of packing
Membership:
Registered Member under Government of India (FIEO)
Focus Industries:
Chemicals Industry, Decorative Industry, Paint Industry,Trading Companies, Distribution Companies, Agents.
We believe in providing prompt delivery, best quality & most competitive price.
We would also be thankful if you could kindly give us the details of leading Business to Business magazines, Trade web portals and "Directories" relating to our product.
We look forward to receive your soonest and positive reply and the details.
Highly finish wall guard putty give finish surface as well as whiteness. All fill the dent and rust area. Our bag is not harm to worker and atmosphere . Itâ??s also loyal rate. And give higher covering
1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body.
2, Can be combined with cover coat in high level.
3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress.
4, With less viscosity and surface tension, its good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products.
5, With suitable expansion coefficient similar as steel plate.
ABOUT US
vitreous enamel coating porcelain enamel steel grates enamel glaze fritHunan Noli Enamel Co., Ltd
is the leader manufacturer of enamel frits & inorganic pigment in China.
Now we have 30,000 M/T enamel frits and 2,000 M/T inorganic pigments annual capacity, 10,000 M/T RTU(Ready to use) powder and electro static powder.
Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including Red& yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating,painting etc.
As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer.
100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa.
FAQ
Q1. Are you factory or trading company ?
We are a factory.
Q2. Whats the MOQ ?
Inorganic pigment MOQ is 25kg, enamel frit, RTU powder and electronic static powder MOQ=200kg.
Q3. What is your principle for the samples ?
We offer free samples if you are willing to pay the shipping cost.
Q5. How about your delivery time?
A: Generally, it will take 15 days after receiving your advance payment.
Q6. What information should I let you know if I want to get a quotation?
A: Your base material, your application area (best to send your finished product picture), the physical parameters you require(acid resistance, adherence, color, etc) the quantity you need. If possible, you can send me your samples and we customize for you.
Q7.Why choose us?
1. Reaching a production capacity of 30,000 Tons/Year for Enamel frit, 10,000 Tons/Year for RTU & electronic static powder, 2,000 Tons/Year for Inorganic pigment.
2. 60% frits & pigment exported to US, Netherlands, Indonesia,Thiland, Vietanam, Korea, Chile etc 30 country.
3. Having over 30 technical experts of frits & pigment from domestic & overseas, focusing on technical development & product improvement.
4. Having complete quality control system, Strong technical supporting team is focusing on customer service in this world.
AT-66 is a kind of synthetic emulsion of styrene acrylic copolymer. It is good at water, alkali and scrubbing resistance. It has excellent performance in adhesion with the base materials. Therefore, it is very suitable for interior and exterior wall paints.
Polymer Type Styrene acrylic copolymer
Appearance Milky white liquid
Solid Content 48±0.5%
pH Value 7.0-9.0
Viscosity 800-2000 cps(Brookfield Viscometer , 3#/60rpm/25)
Average Particle Size 0.1 - 0.2 micron
Glass Transition Temperature About 25
Minimum Film Temperature About 18
Ionic Character Anionic
Applications
AT-66 can be used for interior and exterior wall paints.
At-3202A is a kind of styrene acrylate copolymer synthetic latex, without APEO and plasticizer, with good cement compatibility, water resistance, alkali resistance and excellent elongation AT break, especially suitable for the preparation of high-performance JS waterproof coating.
Appearance :milk white liquid
Solid content:54.5%-55.5%
PH: 7.0-9.0
Viscosity:500-2000 cps(3#60 rpm/25 centigrade)
Particle size :0.2-0.3 micron
Tg:-16 centigrade
MFT:0 centigrade
Ion features:anion
Use :make high performance JS water proof coating ,flexible putty.
At-3128 is a kind of vinegar tertiary acrylate copolymer, which is used to produce synthetic latex of water-borne metal antirust primer coating, and has good compatibility with antirust agent and antirust pigment.The products have excellent adhesion with metal substrate, resistant to water, salt water, salt fog, acid and alkali resistance.It has high weather resistance and yellowing resistance, suitable for metal rust - proof primer.
Appearance:milk white liquid
Solid content: 39%-41%
PH: 7.5-8.5
Viscosity: less than 1000 cps(3#60rpm/25 )
Particle size:0.0-0.2 micron
Tg:23
MFT:10
Ion feature :anion
Enhance your space with our professional-grade acoustic spray, designed to reduce noise and control reverberation in open or irregularly shaped areas. Ideal for ceilings and walls in commercial, industrial, or residential settings, this seamless sound-absorbing coating blends effortlessly with any architecture.
Excellent weather resistance;
Excellent light retention and color retention. Good chemical resistance and water resistance;
With appropriate primer, good adhesion;
Fast drying, good leveling, strong covering power;
Wide range of application, good matching, can be matched with a variety of primers and used for a variety of material surface.
This product is made of acrylic resin and imported sun resistant pigment.It has high solid content,good covering power,fast drying and good weather resistance.It is more convenient to paint with special female valve and special nozzle.It can easily draw various colors and lines.
