DESCRIPTION
CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout.
FEATURES
â?? High flow properties
â?? Bonds to damp substrates
â?? Rapid hardening and strength gain
â?? High chemical resistance
â?? Pre-measured kits make for ease of use
â?? High tensile and compressive strength
â?? 100% solid epoxy
â?? Excellent adhesion to most substrates
â?? Cures at temperatures down to 5oC
â?? Negligible shrinkage
â?? High mechanical strength
â?? Solvent free High early strength
PACKAGING
CC-404 is available in 3 litre and 15 litre kits
Feature: Reinforcement of Waterproof
High heat insulation
Good quality and dust resistance
Water resistance and high weather durable.
Drying faster and easy application.
Application
Cement wall
Galvanized steel
Color pre-painted steel
Plywood
Plastic wave-board
Lime-wall
The coverage will be affected by substrate
dimension and application method.
The loss factor as follow -
Brush= Theory coverage X1.4
Spray= Theory coverage X1.7
Description
HY-330 contains specific high content of polymer resin, and can use with difference size of quartz sand to lay out sand texture.
It is non-toxic, eco-friendly, and can be applied on both interior and exterior wall, help enriching the monotonous surface.
Use
1.Interior and exterior wall decoration.
2.Enhance the finish surface by texturizing molding.
3.Other decoration usage.
Feature
1.Water-based, eco-friendly, and non-toxic.
2.Tough, durable, with good weather resistance.
3.Can prevent surface chalking of cement.
Series Product
HY-360/ Stone Plate Texture Coating
Mars is the premium quality interior emulsion paint having following features :
Pleasant look for walls Rich, thick paint that provides a beautiful finish.
Venus is the premium quality emulsion paint for exterios walls. It have following features :
High build formula provides for for extreme hide and coverage for fewer coats
Outstanding durability against even the harshest weather conditions
Lifetime Limited Warranty
ALPHA wall primer is the premium quality base coat for both interior and exterior walls. It have following features ;
High build formula provides for for extreme hide and coverage for fewer coats
Outstanding durability against even the harshest weather conditions
KRACK-a- SEAL is a ready to use fiber glass reinforced crack filling paste for both interior and exterior surfaces. It ensures unmatched crack bridging ability for plaster cracks of up to 4 mm.
Product: thermoplastic road marking paint
Used for: asphalt and concrete
Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦
Appearance: powder
Color: white/yellow (or other colors according to buyer's requirement)
Coating thickness: 1.6mm-2.0mm
Abrasion resistance: 56.8
Glass beads: 0%/10%/20%/25%/30%
Softening temperature: 90-104â°c
Heating temperature180-220â°c
Drying time after marking touch dryâ??3 mins full dryâ??10 mins
Shelf life 1 year
Storage: store in a tightly sealed container in a cool & dry place
Area of line:
1 ton thermoplastic paint can mark about 200 m2
FUXI ® Chlorosulfonated Polyethylene Paint
Chlorosulfonated Polyethylene coating is prepared by chlorinating and sulfonating polyethylene from the mixed gas of chlorine and sulfur dioxide, which has ozone resistance, weather resistance and anti-aging properties. Excellent acid and alkali resistance, good mechanical properties, good water and oil resistance, cold resistance, humidity and heat resistance, and chemical resistance.
The Advantages of Chlorosulfonated Polyethylene Paint
Good ozone resistance
Good weather and aging resistance
Excellent chemical resistance
Good mechanical properties
Good water and oil resistance
Single component, easy to apply
Line Marking Paint
Aerosol Line Markers are a range of environmentally friendly aerosols. Fast drying, solvent-based formula. Dries to a hard wearing film which is perfect for high traffic areas. Designed for multi-purpose use on a range of commonly found surfaces. Available in a wide range of highly visible colours. PROWAY Line Marking paint produces bright, colourful, crisp and durable lines on a range of surfaces, including concrete, tarmac, asphalt, grass, wood, metal & more. It can be used freehand, in a handheld applicator or in a line marking machine, either for spot marking, survey marking, or to mark out car parks, sports courts, playgrounds, warehouse floors, loading bays, and more.
FUXI ® CHLOROSULFONATED POLYETHYLENE PAINT
Chlorosulfonated polyethylene is prepared by chlorinating and sulfonating polyethylene from the mixed gas of chlorine and sulfur dioxide, which has ozone resistance, weather resistance and anti-aging properties. Excellent acid and alkali resistance, good mechanical properties, good water and oil resistance, cold resistance, humidity and heat resistance, and chemical resistance.
Chlorinated rubber green asphalt paint is a one-component chlorinated rubber acrylic asphalt paint composed of chlorinated rubber resin, asphalt, plasticizers, pigments, additives and solvents. It is with good adhesion to steel, concrete and wood, and dries very fast. The coating application can be performed at low and high temperatures. It is suitable for anti-corrosion of the underwater parts of boats and underground pipelines.
Advantages of Chlorinated Rubber Asphalt Paint for Wood
Excellent anticorrosive and shielding property.
Resistance to mechanical abrasion; fast drying.
Good workability
Specification of Chlorinated Rubber Asphalt Paint
Type Solvent
Solid Content 54%
Mixing Ratio one component
Dry Film Thickness 50 m per coat
Specific Gravity 1.35 kg/Liter
Coverage Rate (Theoretical) 0.13kg/m2/50 m Â
Drying Time Temperature 10 20 30
Dry to touch 25mins 20mins 15mins
Dry Hard 5.5hrs 4hrs 3.5hrs
Package 20kgs
What china paint is used for the bottom of the wooden boat?
Chlorinated rubber road marking paint is formulated with chlorinated rubber, asphalt, organic solvents and additives. It has excellent water resistance and anti-corrosion properties and can protect the bottom of wooden ships from corrosion by microorganisms in the water for a long time.
Chlorinated rubber paint for boats is a long-lasting ship bottom antifouling paint formulated with chlorinated rubber, plasticizer as the base material, cuprous oxide as poisonous material and exudation aid.
Chlorinated rubber antifouling paint can prevent marine attached organisms from fouling the bottom of the ship and keep the bottom of the ship clean. The paint dries quickly, is easy to apply, and has good seawater impact resistance.
Chlorinated rubber boat paint is suitable for marine facilities such as ship bottoms, docks, and offshore drilling platforms to prevent marine attached organisms from fouling for a long time.
Advantages of Chlorinated Rubber Antifouling Paint For Ships
Long-term antifouling coatings. Effectively protect ship bottom against marine growths such as barnacle, oyster, bryozoans and algae.
Quick dry in a low temperature, high durability in ordinary fouling conditions and good workability.
Excellent compatibility with chlorinated rubber primer
Specification of Chlorinated Rubber Antifouling Paints for Ships
Type Solvent
Solid Content 75%
Mixing Ratio One component
Dry Film Thickness 75�¼m per coat
Specific Gravity 1.7kgs/Liter
Coverage Rate (Theoretical) 0.21kg/m2/75Ã?¼m  0.129L/m2/75Ã?¼m Â
Drying Time Temperature 10â?? 20â?? 30â??
Dry to touch 40mins 30mins 20mins
Dry Hard 6hrs 5hrs 4hrs
Package 20kgs bucket
What is the service life of the chlorinated marine paint for rubber?
Antifouling paints have been the most effective and also a widely employed method for preventing fouling of underwater portion of ships. These paints are applied over anticorrosive coatings to remain in contact with seawater. The antifouling paints contain toxic material(s) which are constantly released from the surface of the film into the seawater at a controlled rate inhibiting the growth of fouling organisms. Chlorinated rubber paint formulations utilize cuprous oxide as the main toxic agent. It prevents fouling for periods of about 15-18 months even in Indian waters where fouling is more intense and occurs throughout the year.
Now the chlorinated rubber paint price is reasonable, anything you need, please contact us.
As a paints factory, we will do our best to meet all the needs of customers.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
MULTIS 3 is a multipurpose grease for general lubrication under normal operating conditions and loads, formulated for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.Lubrication of all kinds of bearings and joints when the temperature and loading conditions are normal.Pre-eminently suitable for passenger car, light truck and leisure vehicle applicationsBenefits:MULTIS 3 is miscible with most other conventional soap greases.Excellent mechanical stability avoiding ejection or loss of consistency during operation.Excellent pumpability due to the low temperature characteristics and smooth texture.Very good water resistance, even in a humid environment a sufficient lubricating film will be maintained.
MATERIAL: PC natural 100% pure pc without any coating
CATEGORY: PC
TYPE: Natural
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1450$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
DESCRIPTION:
FORTIUS 10W40 is a semi-synthetic lubricant based on carefully selected highly refined base oils. This oil is designed to meet the latest specifications of both European and American manufacturers of heavy diesel engines. It provides excellent protection against deposits in oil pipes, and turbos and provides improved protection against camshaft wear.
APPLICATIONS:
Suitable for low-emission engines in the Euro II and Euro III standards. It is not suitable for Euro IV engines with particulate filters. It allows very long drain intervals.
KEY FEATURES:
Total engine protection outstanding engine cleanliness and durability.
Cold start very good fluidity at low temperature.
SPECIFICATIONS:
Meets and exceeds: ACEA A3/B4, ACEA E7, API CI-4/SL, API CF-4, API CG-4, API CH-4, JASO DH-1, ALLISON C4, CATERPILLAR ECF-1a, CATERPILLAR ECF-2, CATERPILLAR TO-2, CUMMINS CES 20076, CUMMINS CES 20077, CUMMINS CES 20078, DAIMLER TRUCK DTFR 15B110, DETROIT DIESEL DFS 93K215, DEUTZ DQC-III-18, DEUTZ DQC-III-10, GLOBAL DHD-1, IVECO 18-1804 Classe T2 E7, MACK EO-N, MACK EO-M PLUS, MAN M3275-1, MB 229.1, MB 228.3, MTU Oil Category 1, MTU Oil Category 2, RENAULT RLD-2, RENAULT RLD, VOLVO VDS-3.
DESCRIPTION:
FORTIUS 10W30 is a higher TBN 15 semi-synthetic lubricant based on carefully selected very high-quality base oils of the latest generation, for the lubrication of all diesel engines in on- and off-highway applications. The excellent fluidity at variable temperature conditions reduces wear and fuel consumption. Its high thermal stability and embedded dispersants allow longer oil drain intervals and keep the engine parts cleaner in more extreme conditions.
APPLICATIONS:
This oil is suitable for heavy-duty on- and off-highway applications, agriculture and construction
KEY FEATURES:
Total engine protection outstanding engine cleanliness and durability.
Cold start very good fluidity at low temperature.
SPECIFICATIONS:
Meets and exceeds: API CI-4, SL, ACEA A3/B4-12, ACEA E7-12.
DESCRIPTION:
FORTIUS 5W40 is a semi-synthetic lubricant based on carefully selected very high-quality base oils, which satisfies the highest performance standards for large trucks. It can be used for engines equipped with after-treatment systems.
APPLICATIONS:
Due to its versatile specification levels, it is suitable for a wide range of commercial vehicles. Specifically recommended for large truck engines to satisfy the EURO VI standard, TIER IV interim, TIER IV final, TIER V, stage IIIB, stage IV, and stage V. It specifically includes the Chrysler MS 10902 application.
KEY FEATURES:
High shear resistance: extended drain intervals.
Improved wear resistance: extended engine lifespan.
Improved engine cleanliness: increased vehicle uptime.
SPECIFICATIONS:
Meets and exceeds: API CI-4, SN, ACEA E9, ACEA E11.
