Uni Tol 250 (Near by to International Equivalent)
Effective in all pigments.Cost Effective,Reduces grind Time and more out Put.Enhances gloss
with better flow and color.Effective in very low dosage
Uni Tol 270(Near by to International Equivalent)
Effective in all pigments.Cost Effective,Reduces grind Time and more out Put.Enhances gloss
with better flow and color.Effective in very low dosage. Easy to Handle Bentonite Gellant and eliminates the need polar activator
Uni Tol-250- 20 kg HDPE pack/minimum orderof3000$
Uni Tol 270 -20 kg HDPE pack
Uni Omni - 20 kg HDPE pack
Uni 630 - 20 kg HDPE pack
Our Paint can increase strength & Product life by 1.25 times or more. i.e. if tensile strength is 2 ton, it can be increased to 7 ton with the application of our "DECORA" brand anti rust coatings..
All products will be available in packing size of the 20 ltr., 10 ltr, 4,2 and 1 ltr. customize packing can be developed for order size of more than 100 ltr.
Automatic clamping paint shaker
Kd-30c automatic clamping paint shaker
Case size:1060(h)f-700(w)f-680(d)mm
Packing size:1200(h)f-840(w)f-810(d)mm
Case weight:210kg
Gross weight:245kg
Can size:360(h)f-360(w)f-350(d)mm
Can compress-board readjust range:90-400mm
Shaking time:60/120/240s
Applicable range:1-35kg
Pressure:3500n
Power++750w
Speed:1400r/min
Shaking frequency:680-710t/min
Power supply:220vf+10% 50hz 10a
Features of kd-30c
Small size, save space!
Compose with main vibrator, container press cover and microcomputer controller and so on, is suitable to 0.5-20l all kinds of can/barrel.Max load weight is 35kg.
With plc microcomputer control--can choose and readjust the shaking time freely, long use life span.
Automatic clamp and bring different pressure to bear on the can according to the can size, will not squish or stave the can.
Case size:1060(h)f-700(w)f-680(d)mm
Packing size:1200(h)f-840(w)f-810(d)mm
Case weight:210kg
Gross weight:245kg
5549 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Kd-40a manual clamping paint shaker applicable range:0.5-20l(paint in drum)
Applicable height of drum range:80-410mm
Shaking frequency:710t/min
Working power:220v 50hz
Power supply:0.75kw
Net weight:195kg
Gross weight:240kg
Case size:1070(h)f-820(w)f-750(d)mm
Packing size:1200(h)f-900(w)f-810(d)mm
Kd-40a manual clamping paint shaker
High speed thorough action--mixes most paints in at most 30 seconds.
Will accept 0.5-20l cans.
Fully enclosed for silent operation and added safety.
Large door with front roller for easy can load in.
Safety interlock--prevnts the cabinet door from being opened while the machine is running.
Accommodates all can shapes and sizes from 0.5-20l.
Time set:0-15min
Net weight:195kg
Gross weight:240kg
Case size:1070(h)f-820(w)f-750(d)mm
Packing size:1200(h)f-900(w)f-810(d)mm
Special Features : Provides basic protection to ferrous metal.For spraying and brushing
Uses : For metal items and light constructions, in an urban, moderately corrosive environment, such as bars, sheds, etc
Painted object : Iron Parts and Light Construction
Burglar Bars
Barns
Applied Surface : Ferrous metals
Paint Type : Primer
Properties : For brush and spray application
One Component
Environment friendly, tbt free anti fouling paint. Reduces surface resistance by patented catalic conversion technology. Improves speed and fuel consumption up to 20%.
Special Features : Water based paint, excellent workability. User and environment friendly. Displays the Green Badge of the Israeli Standards Institute.
Uses : SUEDE is used to create a suede-like effect on walls. One of the 'Effects in Color', water based paints series.
Easy application. Suitable for interior walls. Available in five fashionable shades, suited to the unique texture of this effect.
Painted object : Walls
Paint Type : Topcoat
Package Size : 5 lit
Gloss : Matt
Calculated spreading rate [min] : 2.0 m2
Calculated spreading rate [max] : 3.0 m2
Touch Dry [max] : 30.00 h
Waiting Between Coats - Hours : 1.0
Finnal Drying : 24
Thinner : Water
Cleaning Thinner : Soap and Water
Shelf life (months) : 24
* Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor.
** Drying time at 25 deg. C and 65% relative humidity
Special Features : Intumescent paint manufactured under a license from COPON Ltd., England. Conforms to standard B.S. 476, Part 7, Class 1 Fire Rating, approved by the Standards Institute as Class IV paint against spreading fires (IS 755).
Uses : Protection of wood, metal, plastered or concrete walls against fire. Suitable for interior use only. The product's properties are lost upon contact with water.
Applied Surface : Metal
Wood
Plaster or cement walls
Paint Type : Topcoat
Colour : White
* Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor.
** Drying time at 25 deg. C and 65% relative humidity.
* Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor.
** Drying time at 25 deg. C and 65% relative humidity.
1) tinter for two-pack, single coat luxury vehicle solid colour coating
2) high hardness
3) good gloss and build
4) good resistance
5) extremely good hiding
6) colour is bright and long lasting
7) substrates:
A) dried and sanded existing finishes
B) yt-2k and 1k primer surfacer
C) yt-222 putty
8) surface cleaning: remove wax, silicon and other impurities with degreaser
Yt-1k metallic colors:
1) made of several durability-improved resins
2) high quality basecoat
3) good coverage
4) can be blended to optimum metallic, solid or pearl colour effects
5) excellent adhesion and intercoat adhesion
6) substrates:
A) existing finishes that have been de-greased and sanded with #1000 wet sanding
B) yt-2k primer surfacer,
C) yt-222 putty coated surface
7) surface cleaning: remove wax , silicon and other impurities with degreaser
Outer packing: 1l x 8 tins/ctn, 3.75l x 4 tins/ctn
YT-2000 series clear coat:
1) Medium solid
2) Double component mirror clear coat
3) Suitable for overall refinishing and panel or spot repairs
4) High gloss
5) Good chemical resistance and color retention
6) Available in kit: 5L clear coat + 2.5L hardener + 1L thinner
Outer packing: 5L + 2.5L+1L/kit/ctn
YT-8000MS standard clear coat:
1) High performance double component clear coat
2) Suitable for overall refinishing and panel or spot repairs
3) Super high gloss
4) Good chemical resistance
5) Excellent gloss and color retention
Outer packing: 4L x 6 tins/ctn, 1L x 8 tins/ctn
YT-8000HS high solid clear coat:
1) High concentrated double component clear coat
2) High gloss and high solid
3) Good gloss consistency
4) Excellent chemical resistance
5) Use with: PU-2KHS (high solid hardener)
Silver b010: 10-60um bright white pearl luster, used for plastics
Silver b011: 1--15um clean and satin luster, used for plastics and cosmetics
Silver b013: 10-60um light pearl luster, coatings and plastics usage
Silver b020: 5--25um satin luster, mainly for coatings usage
Silver b070: 50-250um brilliant prarl luster, used for plastics and coatings
Iridescent golden size range:5-25um used for plastics and coatings
Iridescent coppere red size range: 10-60um used for plastics and coatings
Iridescent blue size range:10--60um used for plastics and coatings
Iridescent green size range: 5-25um used for cosmetics plastics and coatings
Metal orange red size range: 5-25um used for plastics , cosmetics and coating
Uv varnish, uv dryer, uv ink
Jintech brand uv curing system use for curing of uv curable coating in diffrent industry such as
Printing and wood coating and electronic industry
Jinrad is registered brand for uv curable coating such as uv varnish, uv ink , etc.There are slovent
Free coating made by high quality imported raw material
Pail
5549 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
