Slide illumination:-
By rheostat controlled 6v lamp for each slide. After image illumination by 6v lamp
Auto flashing:-
Auto flashing of slide illumination either simultaneously or alternatively in rapid & variable modes
Mode & mode selection:
Five modes of slide illumination namely normal, flashing right, flashing left, flashing r+ l & auto flashing can be selected by a single selector knob.
Dimensions:-
Longitudinal: 30.3 cms
Lateral: 25.5 cms
Vertical: 36.5 cms
Weight: 20 kgs
Power supply: 220 v ac / 110v
Standard accessories:-
A set of slides containing 9 pairs, one power cord, one dust cover, spare 6v bulbs (2 nos)
Optional accessories:-
Instrument table: manual or motorized
Haidinger brush attachment.
Fusion splicer pt-630
Features
Fiber core can be display clearly
Singlex or y view and x & y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Software upgrade via usb interface
Specification
Model Pt-630
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 5000 resultsú¼3 parameter per result
Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Rs 232
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 150mm(l) x150mm (w) x150mm (h)
Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650
Features
Equel to fujikura fsm-50s, sumitomo type-37 etc
Core to core alignment by pas technology
( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interfac
Specefication
Model Pt-650
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 9 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
Fusion splicer pt-660
Features
Color lcd monitor and 256x magnification
Compact and lightweight
Reversible monitor with control panel on each side
Maximum wind velocity: 15m/s
8sec splice time, 40sec tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test: ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8, 000 groups of splice results
Multiple language options
Specification
Model Pt-660
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 8 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 8(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Usb 1.1 and vga
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 170mm(l) x170mm (w) x140mm (h)
Weight 2.7 kg excluding battery, 3.3 kg including battery
Machiner Properties:
Saving over thousands of specifications, simply one lesson will do, easily click to load the related setting data. Rapid measurement and the measurement result can be able to save for analysis or inquiry purpose. Well apply to at-site inspection, sampling inspection for Q.C. and before delivery.
Inspection items:
1. Recognition of hardness difference , accurancy 2 HRC ( +/- 1HRC)
2. Recognition of different metal material mixed.
3. Same size with similar material parts mixed
4. With/without high frequency harding difference.
5. Dimension measurement of appearance by laser or optic ( extra optional)
6. crack sorting (extra optional).
Optical calcite crystal (iceland spar) both in raw material and semi-finished form or finished form (such as polarizers, waveplates, etc.) ready to be used as per customer's dimension or detail technical specified.
Typical products are rhombohedral shapes, rectangles and rounds, shaped plates, wedges, and cubes
It is carefully selected to eliminate small inclusions, cleavage planes, cloud and mist, point defects and bubbles inside the crystal.
It is known for its properties of transparency and double refraction, used chiefly in the manufacture of polarizing prisms, which are essential parts of polarization components and other special optical instruments.
There are two kinds of E-O modulations. One is longitudinal E-O modulation if the directions of electric field and light propagation are the same. The KDP isomorphic crystals are normally used in this scheme. If the directions of electric field and light propagation are perpendicular, it is called transverse E-O modulation. The LiNbO3, MgO:LiNbO3, BBO and KTP crystals are usually employed in this scheme.
Our Capabilities:
Dimension Tolerance:
(Wí+0.1mm) x (Hí+0.1mm) x (L+0.1/-0.1mm) (L<2.5mm)
Clear Aperture: central 90% or the diameter, No visible scattering paths or centers when inspected by a 50mW green laser
Flatness: less than ª-/8 @ 633nm
Transmitting Wavefront Distortion: less than ª-/8 @ 633nm
Chamfer: í_0.2mmx45íp
Chip: í_0.1mm
Scratch/Dig Code: better than 10/5 to MIL-PRF-13830B
Parallelism: í_20 arc seconds
Perpendicularity: í_5 arc minutes
Angle Tolerance: ªñª+í_0.25íp, ªñª+í_0.25íp
Damage threshold[GW/cm2]:
>1 for 1064nm,TEM00, 10ns, 10HZ (polished only);
>0.5 for 1064nm,TEM00, 10ns, 10HZ(AR-coated) ;
>0.3 for 532nm,TEM00, 10ns, 10HZ(AR-coatd).
Quality Warranty Period: one year under proper use.
A Pockels cell alters the polarization state of light passing through it when an applied voltage induces birefringence changes in an electro-optic crystal such as DKDP (KD*P) and BBO. When used in conjunction with polarizers, these cells can function as optical switches, or laser Q-switches. Frequently, Q-switches are employed in laser cavities for the purpose of shortening the output pulse, resulting in a light beam with enhanced peak intensity. In order to provide the device best suited to your purpose, we offer the DKDP (KD*P) series and LiNbO3 series Pockels cell.
You can operate the cell with either a pull-up voltage or a pulldown voltage. Changing the polarity will only change the direction of the phase rotation. In other words, the pull-down voltage Q-switch use ª-/4-voltage pulses on the Pockels cell and the pull-up voltage Q-switch use ª-/2-voltage pulses on the Pockels cell. You should not, however, operate the cell with a constant applied voltage potential between the terminals, or a duty cycle greater than ~ 2%.
Applications:
OEM laser systems
Medical/cosmetic lasers
Versatile R&D laser platforms
Military & aerospace laser systems
Product Feature:
1). Industry-proven performance;
2). Dry;
3). Highest (99.8% KD*P) deuteration levels in industry;
4). Adhesive/Epoxy-free assembly;
5). Apertures from 8mm diameter up to 20mm diameter;
6). Lowest absorption in industry;
7). High-reliability;
8). Economical upgrade/rebuild program;
9). Highest optical damage thresholds;
10). Accessible technical support;
11). Standard performance documentation;
12). One-year limited warranty.
13). Operation up to 1kHz.
Specification/Models:
D-EO-Q-25.4-39-X-C
Outline Dimension: ª¦25.4x39mm
Aperture: ª¦10mm
Single pass optical transmission:>98%
Voltage (V ª-/4) @1064nm: 3.2KV
Extinction Ratio: >1000:1
Single Pass Insertion Loss:<2%
ICR: >2000:1
VCR: >1500:1
Transmitted Wave Front Distortion: ª- /10
Capacitance: 3pF
Spectral Range of Operation:240-1400nm
Damage Threshold: >1GW/cm2
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
Description:
Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional.
Features:
>>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features
>>> world's most compact and lightest of its class
>>> arc calibration-free system
>>> 4.1" tft color lcd monitor
>>> dual-directional operating system
>>> long life battery
>>> fiber holder option
>>> detachable work plate (attached to carrying case)
Modelú¦ electron eyepiece-a006
Detailed parametersú¦
Resolution: 1280(h)*1024(v) (1.30mp), or 2048(h)*1536(v)(3.00mp);
Chip: 1/2" micron mt9m001;
Magnification of optical system: 0.45x;
Capturing micro-images and showing live video on pc screen;
Saving still images as bmp, jpg files;
Software for previewing, measuring, comparing, counting, saving and deleting;
Tube mounts: ª¦23.2, ª¦30, ª¦30.5mmú+
Pc system required:
Hardware: usb2.0 socket; cpu: intel p4; ems memory: 256m; hard plate: 512m;
Software: win2000( with mend sp4); or winxp (with mend sp3); vista; directx 9.0
569 Optical Machinery Equipment Suppliers
Short on time? Let Optical Machinery Equipment sellers contact you.
