Silicon manganese alloy(Mnsi65-17) is an alloy composed of manganese, silicon, iron and a small amount of carbon and other elements. Silicon manganese alloy is an iron alloy with a wide range of uses and a large output. Silicon manganese alloy(Mnsi65-17) is a commonly used compound deoxidizer for steelmaking, and it is also a reducing agent for the production of low carbon ferro manganese and electro-silicon thermal production of metallic manganese. Silicon and manganese in silicon manganese alloys have a strong affinity for oxygen. The use of silicon-manganese alloy in steelmaking, resulting in deoxidation, with low melting point, large particles, easy to float, deoxidation effect and other advantages. Silicon-manganese alloy(Mnsi65-17) plays an alloying role on the properties of steel in the form of alloying elements. Manganese is also a conventional desulfurizing element, which can prevent the hot brittleness of steel and improve the machining properties and mechanical properties of steel. Excellent deoxidizer of Steel making secondary material, widely used in varies steel types especially well applied in BOF steelmaking deoxidization, improve the liquidity of molten steel and avoid built-up at the nozzle, decrease gas and impurities. Using silicon-manganese alloy to deoxidize and alloying in ladle instead of part of ferro silicon or all ferro manganese is helpful to improve the effective solubility of silicon, and also contribute to the simultaneous deoxidization of manganese and silicon, and improve the deoxidization capacity of silicon.
Ferro silicon is a ferro silicon alloy made from coke, steel scraps, and quartz (or silica) smelted in an electric furnace. Used as a deoxidizer and alloying agent in the steelmaking industry. Used as an inoculant and spheroidizing agent in the cast iron industry. Adding a certain amount of ferro silicon in the iron casting process can prevent the formation of carbides in the iron and promote the precipitation and spheroidization of graphite. Ferro silicon75( Fesi75) is the main raw material for the production of magnesium, and the consumption per ton is about 1.1 tons. The ground or atomized ferrosilicon powder can be used as a suspended phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
High carbon silicon briquette 5015 can be used for all kinds of ordinary steels to deoxidize, increase silicon, increase carbon during casting, and quickly deoxidize, with early slag formation, dense reducing atmosphere, and effectively improve the element recovery rate, so that the quality of molten steel is stable. High carbon silicon briquette 5015 can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes. High Carbon Silicon Briquette 5015 is conducive to the reduction of production costs. High Carbon Silicon Briquette 5015 improve the quality of molten steel. High Carbon Silicon Briquette 5015 reduce the amount of alloy added. High Carbon Silicon Briquette 5015 adjusts the main alloy.
Improve the quality of molten steel, improve product quality and improve product capacity. Reduce the amount of alloy added, reduce steelmaking costs, and increase economic benefits.
High carbon silicon granule is a new type of alloy, generally called silicon carbon alloy, or high carbon silicon,or high carbon ferro silicon, or HC silicon. Oxidation should shorten the reduction time compared with ferrosilicon powder and carbon powder. Reduce power consumption. Improve labor productivity. The decomposition and oxidation of silicon-carbon alloys is an exothermic reaction process . The positive pressure in the furnace is strong. It can provide the necessary conditions for deoxidation and sulphur. Reduce the sulfur content. The reduction period is shortened. Reduces the chance of inhalation of molten steel in the later stage. Reduce the growth of the H element and return to P. The quality of the molten steel is guaranteed. Reduce the amount of quicklime and fluorite powder added. cut costs. Reduce the concentration of harmful gases and smoke and pollute the environment. Conducive to the improvement of operating conditions. Foam slag is rich and active. At the same time, the bubble is wrapped with arc yellow to reduce arc radiation. Improve the life of the lining and the furnace cover. Reduced thermal shutdown time and consumption of auxiliary materials.
High carbon silicon is composed of silicon and carbon alloy, also known as silicon carbon alloy, symbol SiC.High carbon iron silicon is commonly used deoxidizer has the following advantages: no hydrogen source in the deoxidizing process, to ensure safety and reliability; Carbon and silicon are important elements that determine the function of steel. High carbon ferro silicon can not only react with oxygen in the melting steel to play a deoxidation effect, but also the remaining carbon and silicon that are not oxidized can dissolve in the molten steel to play a role of increasing silicon and carbon, so as to achieve the effect of killing two birds with one stone. From the use of silicon carbon alloy can be seen in the replacement of some alloys have a great advantage, steel demand for silicon carbide alloy is also increasing, so silicon carbide alloy prospects.Reduce steelmaking cost, increase economic benefit, improve product quality, stable performance. The point use of high carbon silicon is that it can conducive to the reduction of production costs,Improve the quality of melting steel,reduce the amount of alloy,adjust the main alloy. The main point for choosing our company is the reliability of our products,have our own factory.
Good afternoon! We are offering to you granular sulfur 99.95 Made in Turkmenistan. Packaging: big bags 1000 kg. Price: FCA plant in Yolotan (Mary/Turkmenistan) It is possible to deliver to the Iranian port of Bandar Abbas on FOB terms cost $87. Possible quantity for delivery 20-25,000 tons per month. We will be happy to provide you with additional information.
Sulfur 99.90% 10,000 MT bulk quantity
Manta G700 is a blend of high molecular weight silicone elastomer and cyclic siloxane. It is a translucent silicone elastomer gel. The nature of its gel determines that this product cannot really dissolve in anything. In the oil phase, it can only exist in a stably dispersed form; this product can be used in a variety of cosmetic formulas such as water/oil emulsion, water/silicone oil emulsion, oil/water emulsion and anhydrous products to obtain dry, velvety smooth, Non-greasy skin feel.
WSD-302AB is two components of silicone adhesive , it is fast-cure type glue for cured silicone rubber bonding with cured silicone rubber at high temperature.
Silicone soft touch smooth feeling oil is also called silicone matting oil, silicone matte oil, etc. It is mainly used for coating silicone-based products. Because of silicone products molded out of the surface are rugged and wrinkled, feeling bad while touch it, generally by spraying soft touch smooth feeling oil to improve the silicone surface effect, make it have have a delicate and smooth feelings, and increase products additional value and selling point. Features: Soft touch smooth feeling, anti-sticking, Reduced friction,dust proof functions.
PTC-200A/B is a platinum catalytic vulcanizing agent for molding and hot air vulcanization of compounded silicone rubber, and the vulcanized products are odorless, non-toxic, and anti-yellowing. When used for molded products, it can achieve fast vulcanization at about 110-130â?? (measured mold temperature), and at the same time, it has a relatively long waiting time at room temperature after refining. platinum vulcanizing agent is really an effective alternative to the double two five vulcanizing agent, and more efficient, more environmentally friendly, saving the overall cost! Application products: silicone baby care products
C-20 anti-yellowing vulcanizing agent, is a mixture of peroxide and raw rubber carrier, also used in silicone products molding vulcanization process, used in high-quality products for long-term use, used for transparent, semi-transparent and white, semi-transparent color and other products to prevent yellowing phenomenon, in the transparent or white parts, to ensure that high temperature vulcanization for many times (or the second vulcanization of 200 â?? for about 4 hours of baking), the product does not turn yellow, applicable to the color of pieces of anti-yellowing, to ensure that the color of colored parts do not turn yellow after many times of vulcanization, as well as long-term use of the color does not change color!
C-14 odorless vulcanizing agent, with excellent dispersion, fast vulcanization speed and odorless vulcanized silicone products, is suitable for crosslinking of vinyl silicone rubber, polyethylene and ethylene propylene rubber. It is importantly used in food grade silicone products, kitchen products and baby products. Composition: Aã?? Silicone polymer Bã??Active peroxide C. Anti-yellowing agent Application products: silicone Kitchenwares, silicone household products
Liquid silicone colorant, is a new type of silicone colorant developed for liquid silicone, good compatibility with liquid silicone, good dispersion, strong coloring power, high temperature resistance, no migration, easy and convenient to add, in line with ROHS, REACH and other environmental requirements. Silicone color paste is widely used in liquid silicone injection extrusion and other processes of coloring. Features: It has the excellent qualities of heat resistance, light resistance, migration resistance, color separation resistance, easy out, acid and alkali resistance, strong coloring power, and high solid content.
Dear All We are fertilizer exporter from Uzbekistan. Now available sulfur for export. Any request please contact for more information.
We can provide Sulfur Granule from Indonesia. Purity 99.84% balance, Ash less then 0.01, Moisture 0.05%.
We are a factory specializing in the production of ferroalloys. We were established in 1997 and have been supplying ferroalloys to countries all over the world for a long time. We hope to communicate with you in detail.
Various models can be customized. High-carbon Silicon is Silicon with a larger carbon content. High-carbon silicon Iron is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide and carburizing agents, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and internal quality of the steel are all uniform. Better than traditional craftsmanship. As a new type of strong composite deoxidizer, it can also be used for the tempering of general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Various models can be customized. Alloy silicon balls are commonly used silicon-based alloy additives in the alloy preparation process. They are usually in the form of spherical particles and consist of a high proportion of silicon elements. They can be used as deoxidizers and reducers. During the steelmaking process, alloy silicon balls react with oxygen, reducing it to gaseous form, thereby reducing the oxygen content and improving the purity and quality of the steel. The presence of silicon increases the hardness, strength, and wear resistance of the steel. By controlling the amount of alloy silicon balls added, specific performance requirements of the steel can be met. Additionally, the addition of alloy silicon balls can improve the fluidity and wetting ability of the steel, facilitating smooth operation and uniform distribution of the molten steel during the smelting process. Alloy silicon balls exhibit good thermal stability, allowing them to operate effectively in high-temperature environments. Their inclusion enhances smelting efficiency, reduces energy consumption, and lowers production costs, ultimately improving the efficiency and quality of steel production.
