Find Verified Non Metallic Elements Suppliers, Manufacturers and Wholesalers

Silicon manganese alloy(Mnsi65-17) is an alloy composed of manganese, silicon, iron and a small amount of carbon and other elements.

Silicon manganese alloy is an iron alloy with a wide range of uses and a large output.

Silicon manganese alloy(Mnsi65-17) is a commonly used compound deoxidizer for steelmaking, and it is also a reducing agent for the production of low carbon ferro manganese and electro-silicon thermal production of metallic manganese.

Silicon and manganese in silicon manganese alloys have a strong affinity for oxygen. The use of silicon-manganese alloy in steelmaking, resulting in deoxidation, with low melting point, large particles, easy to float, deoxidation effect and other advantages.

Silicon-manganese alloy(Mnsi65-17) plays an alloying role on the properties of steel in the form of alloying elements. Manganese is also a conventional desulfurizing element, which can prevent the hot brittleness of steel and improve the machining properties and mechanical properties of steel.

Excellent deoxidizer of Steel making secondary material, widely used in varies steel types especially well applied in BOF steelmaking deoxidization, improve the liquidity of molten steel and avoid built-up at the nozzle, decrease gas and impurities.

Using silicon-manganese alloy to deoxidize and alloying in ladle instead of part of ferro silicon or all ferro manganese is helpful to improve the effective solubility of silicon, and also contribute to the simultaneous deoxidization of manganese and silicon, and improve the deoxidization capacity of silicon.

Introduction
Our electronic-grade silicon Sol is a high-purity solution specifically developed for the demands of the electronics industry. Engineered to meet strict purity standards, this silicon sol is ideal for use in sensitive electronic applications, including integrated circuits, precision polishing, and high-purity coatings.



Product Specifications
Our electronic-grade silicon Sol is formulated with rigorous standards, making it an ideal choice for sensitive electronic applications. Key specifications include:

Purity Level: Ultra-high purity at 99.99%, reducing impurities to ensure contamination-free application, critical for semiconductor manufacturing and integrated circuits.

Particle Size: Uniform particle size averaging 20-30 nanometers, optimized for even application and superior polishing in high-precision processes.

Concentration Range: Available in 20% and 30% silicon dioxide concentrations, catering to varying manufacturing needs for different coating and polishing requirements.

pH Stability: Engineered with a stable pH (7�±0.5), maintaining chemical balance during application to prevent material degradation and ensure consistency across production batches.

Storage and Shelf Life: With an extended shelf life of up to 12 months under standard conditions, ensuring long-term quality and usability in manufacturing environments.



Application Scenarios
Electronic Grade Silicon Sol is primarily used in:

Integrated Circuit Manufacturing: Essential for wafer and circuit board polishing, improving surface uniformity and quality.

High-Purity Coatings: Provides a smooth, contamination-free layer on electronic components, enhancing durability and function.

Precision Polishing: Suitable for fine polishing of delicate electronic parts, reducing defects and maintaining high performance in final products.



Product Advantages
Purity and Quality Assurance: Consistent ultra-high purity ensures reliable performance in critical electronics applications.

Enhanced Precision: Fine particle size and stable concentration make it perfect for high-precision tasks, reducing defects and material loss.

Customization: Available in custom concentrations and grades to meet specific needs in electronics manufacturing.

Liquid silicone colorant, is a new type of silicone colorant developed for liquid silicone, good compatibility with liquid silicone, good dispersion, strong coloring power, high temperature resistance, no migration, easy and convenient to add, in line with ROHS, REACH and other environmental requirements. Silicone color paste is widely used in liquid silicone injection extrusion and other processes of coloring.

Features:
It has the excellent qualities of heat resistance, light resistance, migration resistance, color separation resistance, easy out, acid and alkali resistance, strong coloring power, and high solid content.

Introduction
Our electronic-grade silicon Sol is a high-purity solution specifically developed for the demands of the electronics industry. Engineered to meet strict purity standards, this silicon sol is ideal for use in sensitive electronic applications, including integrated circuits, precision polishing, and high-purity coatings.



Product Specifications
Our electronic-grade silicon Sol is formulated with rigorous standards, making it an ideal choice for sensitive electronic applications. Key specifications include:

Purity Level: Ultra-high purity at 99.99%, reducing impurities to ensure contamination-free application, critical for semiconductor manufacturing and integrated circuits.

Particle Size: Uniform particle size averaging 20-30 nanometers, optimized for even application and superior polishing in high-precision processes.

Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.
Features of platinum cure molding rubber silicone rtv

1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
8. Food grade, non-toxic

Why platinum cure molding rubber silicone rtv

Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.

It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed

Cheap liquid silicone rubber to make molds for lost was casting
Lost Wax Casting Silicone
1.Description
GC RTV silicone C-825 are good for lost wax casting. They are widely used for lost wax process of bronze casting to make accurate reproductions of original sculpture.
2. Technical Datasheet
Typical general characteristics Inspection MethodValue
Product data (Catalyzed A+B)C-825
HardnessShore A25±2
Mix RatioA:B100:3
Color/White
Pot life25 C (77F)30-40mins
Curing time25 C (77F)3-4 hours
Mixed viscositymPa.s20000±1000
Tear-strengthkg/cm22±2
Tensile-strengthM.pa4.0±0.5
Elongation%450±50
Shrinkage%?¤0.3
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
3. FEATURES
Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate
4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.
5.SHELF LIFE:
When stored at or below 32C (89.6F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

Factory price rtv2 silicone rubber for crafts molding
Crafts Molding Silicone
1.Description

2. Technical Datasheet
Typical general characteristics Inspection MethodValue
Product data (Catalyzed A+B)C-820C-825
HardnessShore A20±225±2
Mix RatioA:B100:3100:3
Color/WhiteWhite
Pot life25 °C (77F)30-40mins30-40mins
Curing time25 °C (77F)3-4 hours3-4 hours
Mixed viscositymPa.s16000±100020000±1000
Tear-strengthkg/cm20±222±2
Tensile-strengthM.pa3.6±0.54.0±0.5
Elongation%400±50450±50
Shrinkage%?¤0.3?¤0.3
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
3. FEATURES
Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate
4.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
5.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

China supplier Rtv mould making Silicone rubber for Taxidermy Molding
Taxidermy Molding Silicone
1.Description

2. Technical Datasheet
Typical general characteristics Inspection MethodValue
Product data (Catalyzed A+B)C-810C-825C-830
HardnessShore A10±225±230±2
Mix RatioA:B100:3100:3100:3
Color/WhiteWhiteWhite
Pot life25 °C (77F)30-40mins30-40mins30-40mins
Curing time25 °C (77F)3-4 hours3-4 hours3-4 hours
Mixed viscositymPa.s6000±100020000±100023000±1000
Tear-strengthkg/cm12±222±223±2
Tensile-strengthM.pa2.0±0.54.0±0.55.0±0.5
Elongation%320±50450±50460±50
Shrinkage%?¤0.3?¤0.3?¤0.3
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
3. FEATURES
1.Low viscosit
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate
4.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
5.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle

Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds
Artificial Stone & Concrete Casting Silicone Rubber
Features:
Amazing fluidity and easy to operate
Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic)
Delicate design available
Mixing ration: 1:1, easy to mix
Easy de-molding
Excellent tension and tear strength
High performance in duplication
Shrinkage is almost zero (below 0.1)
Excellent resistance to weather, temperature, aging, acid and aging-proofing.
High resistance to high temperature and aging(resist -60â?? to 250â??)
Appearance:
Part A:a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
Technical Data
Characteristics of the non cured product
Properties G-820 G-825 G-830 G-835 G-840
A B A B A B A B A B
Appearance low viscous liquid
Colour translucent
Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10
Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000
Polymerisation
Curing conditions: 1h at 80 �°C
Properties G-820 G-825 G-830 G-835 G-840
Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2
Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10
Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50
Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2
Application:
GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc.
Operation Method:
Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing.
Notice
What is the hardness should I choose?
Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design.
Warm Tips:
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.

Ferro silicon is used as an essential alloy in the production of steel and cast iron. Ferro silicon is used to remove oxygen from steel and as alloying element to improve the final quality of the steel. Ferro silicon can also be the basis for manufacture of pre-alloys like magnesium ferro silicon (fesimg), used for modification of melted malleable iron. 
Main markets are the worldwide producers of alloyed, stainless and carbon steel. One of the fastest growing categories within steel is the stainless sector, in both flat and long products. Stainless steel has a specific consumption of ferro silicon 510 times higher than regular carbon steel.
Special ferro silicon grades, like low al, high purity and low c ferro silicon, are used in the production of special steel qualities. Compared to regular ferro silicon, special grades of ferro silicon will help to keep both the content of inclusions and the carbon content in the final steel at very low levels. 
Ferro silicon is produced in submerged arc furnaces, using as raw material high-purity quartz, charcoal and iron ore.

Silicon metal 97 is a type of silicon metal alloy that is composed of approximately 97% silicon, with small amounts of iron, aluminum, and other trace elements.
Silicon metal 97 is often used in industries where lower purity silicon is acceptable, such as the production of silicones, silanes, and other chemicals. It may also be used as a deoxidizing agent in the steel making industry or as an additive in the aluminum industry.

The main grades our products cover:
Grade
Si Fe(max)Al(max)Ca(max)P(max)
553
98.5%min
0.50%
0.50%
0.30%

441
99% min
0.40%
0.40%
0.10%

421
99.2% min
0.40%
0.20%
0.10%

3303
99.3% min
0.30%
0.30%
0.03%
50ppm
2202
99.5% min
0.20%
0.20%
0.02%
40ppm

Packing: In 1mt big bags
Shipment: With in 15 days after comfirming the order
Apperance:Dark gray
Physical Property: High melting point and resistivity, good heat resistance and good anti-oxidation effect.
Particle Size: (10-100)mm.

Application and use:
1. Used in aluminum: An additive to aluminum alloys, silicon is used to increase the fluidity and tenacity of Aluminum and its alloys, which enjoy good castability and weldability accordingly.
2. Used in organic chemicals: Silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants.
3. Used in electronic parts: Silicon metal is used in producing monocrystalline and polycrystalline silicon of high purity for electronic parts, such as semi conductors, etc.

Using high-purity silicon carbide powder, formed through isostatic pressing, fired to create high-density structural components. Long lifespan, good heat dissipation performance, low friction coefficient, enhancing grinding efficiency. Lightweight, minimal centrifugal force, high grinding speed, no pollution, high product purity, improving grinding efficiency, saving costs.
We adopt isostatic pressing forming method. The outer diameter of silicon carbide wear-resistant barrels can reach up to 1000mm. Large-diameter silicon carbide barrels are formed by reaction sintering, while small-diameter barrels are formed by pressureless sintering, which is more wear-resistant than reaction sintering.

Key Features:

Chemical Composition: Silicon Carbide (SiC)
Physical Properties: High hardness, low density, superior thermal shock resistance.
Electrical Properties: High electrical conductivity, low dielectric loss.
Thermal Properties: High thermal conductivity, excellent heat resistance.
Applications:

Metallurgical Industry: Lining for high-temperature furnaces.
Chemical Industry: Reactor linings and catalyst supports.
Electronics Industry: Semiconductor manufacturing.
Mechanical Industry: High-performance mechanical components.

High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements.


High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.

High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements.


High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.

High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements.
High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.

Various models can be customized.

High-carbon Silicon is Silicon with a larger carbon content. High-carbon silicon Iron is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide and carburizing agents, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and internal quality of the steel are all uniform. Better than traditional craftsmanship. As a new type of strong composite deoxidizer, it can also be used for the tempering of general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.

Silicon Carbide beam
Reaction Bonded Silicon Carbide beam performance
Silicon carbide beam is also called silicon carbide bearing beam and silicon carbide column. Silicon carbide beam has large high-temperature bearing capacity, oxidation resistance and no bending deformation after long-term use. It can significantly save energy consumption without increasing the weight of kiln car and has long service life. It is an ideal kiln for sanitary porcelain, electric porcelain and other industries

Application of silicon carbide beam
Silicon carbide beam adopt by slip casting process, mature sintering technology and extraordinary finishing ability. They are very suitable for manufacturing super large products with complex shape and strict tolerance requirements. They are suitable for the load-bearing structure of tunnel kiln, shuttle kiln, double-layer roller kiln and other industrial kilns.

Specification of silicon carbide beam
Accept the customization of silicon carbide beams and silicon carbide beams of different specifications
Bearing capacity of silicon carbide beams :

silicon carbide roller
Performance of silicon carbide rollers
Silicon carbide roller, ceramic rollers, are widely used in tunnel kilns, roller kilns, natural gas kilns, electric furnace wire kilns, silicon carbide kilns and other fields, the heating temperature can reach 1350 �° C, vertical or water safety It is installed on both sides of the furnace cavity, and some furnaces are installed on the top and bottom of the furnace cavity, which can effectively reduce the weight of the kiln car and prolong its service life.

The use of silicon carbide roller Scope of application
silicon carbide rollerSanitary ware kiln, nitrogen protection kiln, high-voltage electric porcelain kiln, daily-use ceramic kiln, A-class lightweight foamed ceramics, 1260 â?? ceramic roller kiln.

Specifications and models of silicon carbide roller
Our company accepts customization of silicon carbide roller of different specifications