ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification. The ASTM B163/ASME SB163 material shall conform to the composition limits of nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, and zirconium, yttrium, boron, cobalt, columbium, tungsten, and nitrogen specified. Tensile strength, yield strength, elongation, and Rockwell hardness of the material shall conform to the required Mechanical Properties set by this specification. Test methods such as chemical analysis, tension, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed for qualified ASTM B163/ASME SB163 alloy tubes. ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE PROVIDED BY YUHONG ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube The most popular materials under ASTM B163 Standard are: UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825). Incoloy 800/N08800 Nickel Alloy Pipe/Tube Incoloy 800H/N08810 Nickel Alloy Pipe/Tube Incoloy 800HT/N08811 Nickel Alloy Pipe/Tube Incoloy 825/N08825 Nickel Alloy Pipe/Tube Inconel 600/ N06600 Nickel Alloy Pipe/Tube Inconel 601/ N06601 Nickel Alloy Pipe/Tube Monel 400/N04400 Nickel Alloy Pipe/Tube Nickel 200/N02200 Nickel Seamless Pipe/Tube ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE FEATURES Nickel alloys tube under ASTM B163 can meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies. ASTM A163 Coiled Tubing is highly resistant to corrosion in different environments. This tubing enables the speed of the operation to be fast at the same time, it is very safe and easy to run. ASTM B 163 Tubing is used in applications for drilling, logging, fracturing, perforating, and production operations. These tubings have a lower environmental impact. If you are looking for a reliable ss pipe company, don't hesitate to contact us!
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
Pure nickel has good mechanical strength,corrosion-resistant and heat-resistance strength. It is widely used in electric apparatus,chemical machinery,ood processing equipment,rechargeable batteriesomputers, cellular Phone, power tools, camcorders and so on. Product Parameters Size dimension range: Wire: 0.025-10mm Ribbon: 0.05*0.2-0.5*6.0mm Strip: (0.05-0.5)*(5-200) Pure Nickel series: N4 N6 Nickel 201 Nickel 200 characteristic 1. It has weldability, high conductivity and suitable linear expansion coefficient 2. The strength is better and the resistivity is lower at high temperature 3. It has high melting point, corrosion resistance and good mechanical properties. It has good pressure processability in hot and cold state, easy to remove gas, and is suitable for radio, electric light source, mechanical manufacturing and chemical industry. It is an important structural material in vacuum electronic devices. Pure nickel wire can be divided into N4 and N6 according to the material. N4 pure nickel wire That is, N4 nickel wire, also known as nickel 4. N4 nickel wire has good mechanical strength, corrosion resistance and high heat resistance strength, and is suitable for making vacuum devices, electronic instrument components, chemical production of strong alkali filter screen, etc. N4 pure nickel wire is suitable for radio, electric light source, mechanical manufacturing and chemical industry, and is an important structural material in vacuum electronic devices. N6 pure nickel wire That is N6 nickel wire. Also known as No. 6 nickel, it is a kind of pure nickel wire. The characteristics of N6 nickel wire: in addition to the physical and chemical properties of metal nickel, N6 nickel wire has strong alkali resistance, neutral and weak acid resistance, and has stable performance in the atmosphere, fresh water and sea water. It is mainly used for making various alkali resistant equipment, and its product shape includes tube, plate, rod, belt, wire, etc. N6 pure nickel wire has good corrosion resistance and good corrosion resistance in concentrated alkali solution. It has good corrosion resistance to alkaline and neutral solution medium of carbonate, nitrate, sulfate, chloride and acetate
FOR SALE (EXCLUSIVELY): 0.025 mm pure resistance nickel wire. PRICE: 150 $- 165$/ meter (very competitive internationally) AVAILABLE QUANTITY: 6,430,000 meters pure determined 99,98% 454,499 meters pure determined 99.89% 2,281,350 meters pure determined 99.83 SOURCE: Saudi owner Located inventory Dubai PROVIDED BY: Saudi Agency
Russian Origin of Nickel Wire Purity 99.9% Thickness 0.025mm QTY 456,136 meters, (48 Bobbins)
nickel wire qty: 2,7 Mil meters
Nickel 405 (UNS N04405): Nickel 405 is a variation of Monel 400 with slightly modified chemical composition, featuring higher sulfur content. The increased sulfur content improves machinability but may slightly reduce the alloy's corrosion resistance compared to Monel 400. Despite the slight compromise in corrosion resistance, Nickel 405 still offers excellent resistance to marine environments, alkaline solutions, and acidic conditions. It is often used in applications where improved machinability is desired, such as screw machine parts, fasteners, and valve stems. Nickel 200 (UNS N02200) and Nickel 201 (UNS N02201) are commercially pure wrought nickel grades with low carbon content. They offer excellent resistance to corrosive environments, particularly alkaline solutions.
Material: Ni200 Ni201. Thickness: 0.25mm, 0.3mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm etc. Porosity: 50-60%,55%, 65%, 60-70%, 75% 70-80% Size: 100x100mm, 200x200mm, 300x300mm, 400x400mm, 500x500mm, 600x600mm etc. Applicationï¼? The field of hydrogen production by electrolysis of water; PEM electrolyzer diffusion layer; Hydrogen fuel; Hydrogen suction machine, hydrogen-rich water dispenser, hydrogen-rich cup;
Material: N4 N6 Ni200 Ni201 Thickness: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm ,1.0mm, 1.2mm etc. Micron: 3-100um Size: 100x100mm, 200x200mm, 300x300mm, 400x400mm, other size can be customized. Porosity: 50%-90% 1) The thickness, pore size, unit weight, porosity and other performance indicators of nickel fiber felt can be comparable to nickel foam. 2) Nickel fiber felt has the characteristics of larger specific surface area, higher tensile strength and better flexibility than foamed nickel, and is suitable for making large-capacity, high-current nickel-metal hydride batteries. Application Filter material Photocatalyst series air filter screen Chemical catalyst and support materials Battery electrode material Heat exchange and adsorption materials
Nickel Wire of 0.025 mm diameter size, We have ready stock of Nickel Wire in Dubai and we are the end seller and stock holder in Dubai
Nickel.
Nickel Spent Catalyst.
Nickel sludge.
Spent catalyst vanadium moly nickel.
Nickel.
Nickel Sludge.
Nickel sludge.
