Web Enabled\Cloud Based Customized Data Logger: DWEL-2020 is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server. Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications. Applications Plant Process data Monitoring. Energy consumption Monitoring and Control applications. Gas, Pollution Monitoring applications. Water flow Monitoring and pump house remote control applications.
EdgeCOM BL304 Embedded ARM Computer is built around NXP i.MX8M based on Arm Cortex-A53 and Cortex-M4 cores, running speed up to 1.8GHz, 2G DDR4 RAM, 8GB eMMC Flash. The embedded ARM based controller supports Linux, Android, FreeRTOS and other systems. The Embedded controller comes with 4 serial ports, 1 CAN port, 2 Ethernet ports, 2 Digital inputs, 2 Digital outputs, 2 SIM card slots, 1 Mini PCIe expansion slot for 4G/WiFi module. This tiny embedded computer is widely applicable to a variety of industrial solutions. The ARM based embedded controller suppotrs Ubuntu, Debian; Node-Red, QT, Python, C++; MySQL, InfluxDB, SQLite, Docker, Ignition for secondary development. The Embedded controller comes with 4 serial ports, 1 CAN port, 2 Ethernet ports(1 100M Ethernet port, 1 Gigabit Ethernet port), 2 Digital inputs, 2 Digital outputs, 2 SIM card slots, 1 Mini PCIe expansion slot for 4G/WiFi module.
Model POE-S2004FB Ports 4 10/100Mbps POE + 2 10/100Mbps Uplink Power Input AC 100-240V, 50/60Hz, 1.0A Max. Power Output DC 48-57V, 80W (Rated), Full Load Max. 65W (Net Output) Max. 60W for 1st PoE port Max. 30W for 2nd~4th PoE port Data Exchange 10/100Mbps (Gigabit is optional and available), Store and Forward Bandwidth/MAC 1.6Gbps, 1K Package Forwarding/Buffer 1.15Mpps, 768K Power/Data Assignment Power: pin 1,2 + pin 3,6 - ; Data: pin 1,2,3,6 Ambient Environment Operating temperature: -10~55 Storing temperature: - 40~75 Operating Humidity: 5%~90% RH, No condensing Storing Humidity: 5%~95% RH, No condensing Network Protocolï¼? IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at/PoE++ Power over Ethernet cable pairs or device IEEE 802.3x Flow control IEEE802.1q VLAN Network bridge operation Data Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Network Medium 10Base-T: Pair 2 Category 3,4,5(Cat3,4,5) UTP/STP(â?¤250m) 100Base-TX: Pair 2 Category 5(Cat5) or better UTP/STP(â? 150m) System Mode Standard Free communication VLAN Port Isolation 250m Supper long-distance transmission Lightning Protection 3KV 8/20us Certificate CE, FCC, RoHS Warranty 1~2 years Size/Weight PoE Switch Size: 190mm*130mm*33mm (L*W*H) Packing Box Size: 310mm*210mm*60mm (L*W*H) Net Weight: 0.9kg, Gross Weight:1.1kg
4G wireless remote network fault monitoring terminal RTU5028E can be used for disconnection and power failure network fault monitoring, applicable to the state monitoring of server rooms, base stations, laboratories, network cameras, servers, etc.. It can automatically determine the cause of failure of 7 network devices, distinguish whether the network device failure is caused by network failure or power failure, and can automatically or manually restart the device remotely to solve the failure problem, which greatly improves the efficiency of network equipment operation and maintenance. 1.Multi-way real-time monitoring of network disconnection + power failure + network cable failure; 2.Supports simultaneous monitoring of 7 network devices, including WiFi devices; 3.Automatically determine whether a network device failure is caused by a network or a power outage; 4.Automatic or manual remote reboot of the device to solve problems quickly; 5.Built-in 4G and Ethernet communication method; 6.Support BLIIoT Cloud and SCADA and other monitoring centers;
S275 is a 4G RTU with IIoT data acquisition remote monitoring and control SMS alarm functions it is widely used in remote data acquisition and monitoring of various industries such as smart grid smart transportation industrial automation smart building firefighting public safety environmental protection meteorology digital medical agriculture forestry water coal mining petrochemical and other fields 8 digital input 4 relay output 6 analog input and 1 temperaturehumidity input 1 RS485 serial port Modbus RTU MasterSlave can expand multiple Modbus Slave devices Max 320 data points Embedded TCPIP stack supporting Modbus RTU Modbus TCP and transparent transmission Builtin powerful telephone and SMS alarm function regular reporting abnormal upper and lower limit alarm Local logic control of the device linking relay outputs based on monitoring of digital input and analog value thresholds Antidropout mechanism to ensure the device always online and it comes with data retransmission function Support remote configuration remote management and remote restart by SMS Builtin powerful timer function support timed automatic reporting timed daily SMS timed online timed offline timed restart timed execution relay output etc
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifi-cations for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0 to 70 C.
GP-R650 series industrial grade 5g router is a new generation of wireless router independently developed by our company. It integrates 5g / 4G / 3G, 2.4G and 5.8G WiFi, routing, switching, network management, VPN, firewall, security and other technologies, and provides static routing / dynamic routing, 5g / 4G / 3G dialing, QoS, industrial serial communication and other software features New high cost performance, full function edge network terminal equipment. High performance industrial 5g module is adopted Power supply: from + 7.5V to + 32V DC Protection grade: IP40 (can handle to ip51) Support multiple VPN protocols (PPTP, L2TP, IPSec, VPN) Support serial port simple DTU function
GP-XD1200 adopts the latest high pass customized chip optimization algorithm, which has strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc.
GP-AG500 access product is a wireless access device based on IEEE 802.11ac technology independently developed by Guangpu technology. The utility model has the advantages of rich functions, high performance and high reliability, to meet the needs of WLAN wireless applications in industrial scenarios. GP-AG500 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. It can work simultaneously in 2.4GHz and 5GHz frequency band when working in AP mode, and supports IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n and 802.11ac five modes, with the highest access rate of 733Mbps. Supports 802.11b/g/n and 802.11a/n/ac standards Client-based millisecond-level fast roaming Diversified access authentication methods MAC address cloning
The GP-AG1000 wireless access point product is a wireless access device based on IEEE 802.11ac technology independently developed by GPSENKE technology. The utility model has the advantages of rich functions, high performance and high reliability, which can meet the requirements of WLAN wireless application in industrial scenes. The GP-AG1000 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. Operating in AP mode, it can operate in the 2.4GHz and 5GHz bands simultaneously. Supports four modes: IEEE 802.11a, IEEE802.11 b, IE 802.21g, IEE 8021n and 802.8ac. The highest access rate is 1167 Mbps.
GP-AP1800AX-FS outdoor Access Point product is based on IEEE802.11ax technology independently developed by GPSENKE. GP-AP1800AX-FS support 802.11b/g/n/ac/ax standard, Dual-frequency maximum bandwidth up to 1775Mbps. Can widely used in medical/ treatment/ schools/ underground/ parks/ pipecorridors/ scenicspots/ amusement and other outdoor wireless network coverage. GP-AP1800AX-FS used the newest custom chip optimization algorithm. It have high anti-interference ability, high bandwidth, high standby, strong stability, and support fat and thin integrated mode. The professional integrated outdoor design with IP67 water-proof and wide temperature working ability are very convenient for outdoor installation. 802.11 b / g / n / ac / ax standard Diversified access authentication Support 802.11k / v / r protocol Support 2 Gigabit LAN + 1 SFP optical slot IP 67 protection level
The AX5400 router supports the latest IEEE802.11ax protocol standards, which transforms between Ethernet wired data and local wireless LAN data. The MU-MIMO and Beamforming functions guarantee network rate and signal quality for multiple users. In addition to the high-performance WiFi6, the devices also support firewall, QoS, maintenance and management, and other functions to provide stable services for home and small business users. Support Wi-Fi 6 Support VPN Remote management Support AX5400 rate Support MU-MIMO Support MESH networking
The AX5400 router supports the latest IEEE802.11ax protocol standards, which transforms between Ethernet wired data and local wireless LAN data. The MU-MIMO and Beamforming functions guarantee network rate and signal quality for multiple users. In addition to the high-performance WiFi6, the devices also support firewall, QoS, maintenance and management, and other functions to provide stable services for home and small business users. Support Wi-Fi 6 Support VPN Remote management Support AX5400 rate Support MU-MIMO Support MESH networking
The AC1200 Wireless Router supports data rates up to 1200 Mbps in 2.4 GHz band & 5 GHz band, and is compatible with IEEE 802.11g/b (WiFi), IEEE802.11n (WiFi 4) & IEEE802.11ac (WiFi 6) wireless devices. Featuring an omni directional antenna design with transmission power up to 100mW, the AC1200 combines the router, wireless access point, switch & firewall functions in a single unit,providing a convenient yet comprehensive network management solution. Complies with IEEE802.11n, IEEE802.11ac, IEEE802.11b/g, IEEE802.3i, IEEE802.3u Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security Transmission power up to 100mW, which can effectively improve the Wi-Fi coverage Supports MAC/IP filtering and URL blocking High speed data rate up to 1200Mbps Supports DHCP server and Anti-Dos firewall Supports Virtual Server and DMZ Web user interface (remote configuration), firmware upgradeable
GP-AX1800 is a high-speed ,high performance wireless router that provides 2.4G and 5.8GHz dual frequency wireless services.GP-AX1800 support WiFi6 and provid a higher speed & stable wireless access environment for users. 2.4GHz(674Mbps) & 5GHz(1200Mbps) Maximum Wireless Throughput Support Watchdog Hardware Function Automatically Restored Abnormal Special Coating for heat dissipation Product Size:197.7mm*144.2mm*32.4mm Maximum power consumption: 15W Highest Rate:2.4G 574Mbps 5.8G: 1200Mbp
DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance. DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots. The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution. The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
Redundant Dual Rate Transponder 10 Gbps Repeater/Converter/Transponder This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Media conversion Signal repeating Lambda conversion 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP28 Multi-Rate Quad Transponder 125Mbps~32 Gbps Repeater/Converter/Transponder SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc. The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Multi-rate supports 1Gbps ~ 32Gbps Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10/16/32Gbps CPRI;2/3/4/5/6/7 1G/10G/25G Ethernet SDH STM-4/16/64 Media conversion Signal repeating Lambda conversion The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP28 Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module is also suited for the use as a repeater,The SFP28 transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
