With the support of diligent team of professionals, R S Enterprises is known as a leading manufacturer, supplier, exporter and trader of Water Purifier Plant, Water Softener, RO System Spare Part, Solar Lamp, Water Demineralizer, Solar Panel and many more. We also render highly reliable and effective RO System Installation Service to the customers. We have started our business in the year 2010 as a partnership based company at Chennai in Tamil Nadu, India. Our products are highly appreciated among the customers for their high reliability, advance technology, hassle free performance, excellent finishing, less maintenance requirement, long service life and various other features. Moreover, we use high grade inputs, advance technology and innovative ideas of our skilled technician in the manufacturing of these products. Our dedicated team of skilled professionals enables us to deliver the bulk consignments of customers on time with maintaining world class standards in our products. Our exporting countries are East Asia, North Asia, South Asia, Germany and Indian Subcontinent.
RS232,RS485 to GPRS GatewayGPRS GATEWAY Maximum O/P Power 2W for GSM 900 and 1W for GSM 1800/1900 TCP/UDP,SMTP,FTP,PPP supported Baud 300 to 115200bps Voice/Data/SMS Plug and Play built in TCP/IP Stack
Overview Ajlon RTU is a Quad band GPRS 2G/3G/4G communication enabled device which RS232 or Serial or RS485 over Modbus RTU protocol and transfers vital operational data (measurement as well as alarm data) to the remote server in a timely manner Product Features Communicates with any RS485 device over Modbus RTU and collects all related data periodically All data and event messages are time stamped USB Interface to program all configurable parameters Configurable Remote Server IP Address, Server Port number Configurable GPRS Service provider APN, Username and Password Modbus communication parameters baud rate, parity, number of stop bits etc Modbus Poll interval, server data transfer interval RTC time Any device site name Watchdog timer enabled system integrity Built-in retry and buffering mechanism to transfer data to the server to mitigate low signal strength and temporary GPRS service outage problem Technical Specifications Supply Voltage 24V DC Input type Modbus RTU or Serial or RS232 Modbus RTU mode Supports Master mode â?? Can communicate with the slave device and get operational parameters and control the output state of device VFD poll rate Programmable â?? minimum 60 seconds configurable parameters 1 Remote server IP, Port number 2 Poll interval 3 RTC Time 4 Modbus Communication parameters- Baud rate, parity, number of stop bits etcâ?¦ 5 Device name LED Indication LED indication in the front panel for all type of fault states 1.GSM Module error 2.SIM Presence state 3.GSM Signal Strength 4.Unit Health Status 5.Modbus communication status 6.Server connectivity status Operational Parameters for Remote monitoring Parameters available with any selected device Alarms for Remote Monitoring Parameters supported by device GPRS connection mode Continuous Always connected to theserver Environmental Specifications Operating Temperature 0 C to 50 C Storage Temperature 0 C to 70 C Relative Humidity 85% Non condensing
Gprs Io Gateway Item Code: Wct-710 Gprs I/O Gateway Wct-710 Is A Smart Connectivity Of Ios, Designed To Monitor And Control Your I/O Ports, Interfaces Etc. Also Known As Got (Gprs Of Things), Which We Can Control And Monitor Any Time, Any Where. The Device Can Configured Or Update Firmware Over The Air (Ota). Features: 8 Digital Inputs 2 Analog Inputs 2 Relay Outputs 1 Wire Interface Temperature Sensor Interface Status Leds Remote Configuration Via Sms/Gprs Other Information: Monitor And Control Your I/O Ports, Interfaces Any Where, Any Time.
We are manufacturer for Wireless RS485 (GPRS/Wi-Fi) Modbus Readers and Data Loggers. We have been supplied to various industrial and governmental projects. For any type of Customization and requirement you can call us , we will provide the features as u prefer.
Item Code: WCT-805BOur Commapany offers (No AT Commands) Serial/Modbus/RTU to GPRS Gateway communication link provide a cost economical approach to achieve â??alwaysONâ?? packetized data network. It is a plug and play device, allows you the migration of your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge of AT command or GPRS. You can view this device as the virtual serial wire over the air that links all your remote equipments to the central PC. It is a full transparent, protocol independent gateway, for AMR, SCADA, general remote monitoring, control and data exchange applications. Features: Automatic Meter Reading Power Monitoring and Control Fault Indicators Temperature Alerts, Indicators Pump Control, Flow Measurements Surveillance Home Automation Windmill, SCADA, Data Exchange Central Monitoring and Control Systems Base Station, ATM Monitoring and Control Other information: Easy to plug and play allows to migrating your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge on AT command or GPRS. You can view the device like virtual serial wire over the air that links all your remote equipments to the central PC/Server. It is a full transparent protocol in-dependent gateway. It is easy to configure, manage, and monitor remote devices on a private network over the Internet. The products also come with built-in I/O that can be configured to indicate the priority of events. The device can configured or update firmware over the air (OTA).
Web Enabled By Logger: WEDL-Cloud Based is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server. Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications. Applications: Plant Process data Monitoring. Energy consumption Monitoring and Control applications. Gas, Pollution Monitoring applications. Water flow Monitoring and pump house remote control applications.
Product Description Cloud Data logger/IoT/GPRS/WiFi/ is a combo device that provide data logging along with cloud computing facility. It reads the data from any digital device through RS232 or RS485 (Modbus-RTU) and stores, uploads the same by user defined interval. Hardware Feature: Up to 8/16/32 devices can be connected simultaneously on a single serial port. 20 registers per device can be configured for saving data. Total 3 00 000 records can be saved in data memory. Cellular modem for data transmission (GSM/GPRS). USB keyboard connectivity for configuring devices. Report dumping in Pen drive in .xls format for reporting. User defined time intervals for data logging & uploading. Provision for manual data collection & upload. No need for installing additional, costly SCADA/PLC systems. Software Feature: Authorized access on the server for better security. Data easily accessible from anywhere across the globe. Excel format report can be generated on web application. Provision to create multiple users on web application. It is a Cross- platform software.Can run be on any operating system. Can run on devices like mobile phones, tablets, laptops, desktops etc. that have a web browser installed. Daily Reports can be generated through web application and shared via email. Advantage: Real time monitoring of Digital indicators/process parameters at plant/factory. Any controlling measure can be done on immediate basis. SCADA & Computer system not required.Internet connection is not required at site. Cost effective, as it works on GSM technology. Password protected for better security. Unauthorized access to data is restricted. Autosave feature to prevent data loss during network failures. Device will save the data and send it to the destination when the network is up and running. Isolated from current system to avoid any hindrance in process execution. Specification: Up to 8/16/32 devices can be connected via RS485 modbus protocol. Flexible configuration at the user's site for settings like 20 Registers per device, baud rate, bits and parity. Configurable header for each register. 40,000 record saving capacity for each device with timestamps. Data logging within device at user defined intervals. Supports standard IBM Keyboard for device configuration. Manual data collection & uploading option. Cloud logging at user defined intervals. Cloud logging interval is common for all devices. In case of network issues, the records are auto-saved and sent to server once the connectivity resumes. Standard mobile 2G SIM is used for data transmission to cloud server. Convenient Housing (200 x 190 x 96 mm) which can be easily mounted on panels. Application: Industrial Control Panels Industrial Automation Cold Rooms Blood Refrigeration Banks Energy Monitoring System RMC Plants Asphalt Mixing Plant Weighing Application Process Control
Gprs Io Gateway Item Code: Wct-710 Gprs I/O Gateway Wct-710 Is A Smart Connectivity Of Ios, Designed To Monitor And Control Your I/O Ports, Interfaces Etc. Also Known As Got (Gprs Of Things), Which We Can Control And Monitor Any Time, Any Where. The Device Can Configured Or Update Firmware Over The Air (Ota). Features: 8 Digital Inputs 2 Analog Inputs 2 Relay Outputs 1 Wire Interface Temperature Sensor Interface Status Leds Remote Configuration Via Sms/Gprs Other Information: Monitor And Control Your I/O Ports, Interfaces Any Where, Any Time.
Web Enabled\Cloud Based Customized Data Logger: DWEL-2020 is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server. Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications. Applications Plant Process data Monitoring. Energy consumption Monitoring and Control applications. Gas, Pollution Monitoring applications. Water flow Monitoring and pump house remote control applications.
EdgeCOM BL304 Embedded ARM Computer is built around NXP i.MX8M based on Arm Cortex-A53 and Cortex-M4 cores, running speed up to 1.8GHz, 2G DDR4 RAM, 8GB eMMC Flash. The embedded ARM based controller supports Linux, Android, FreeRTOS and other systems. The Embedded controller comes with 4 serial ports, 1 CAN port, 2 Ethernet ports, 2 Digital inputs, 2 Digital outputs, 2 SIM card slots, 1 Mini PCIe expansion slot for 4G/WiFi module. This tiny embedded computer is widely applicable to a variety of industrial solutions. The ARM based embedded controller suppotrs Ubuntu, Debian; Node-Red, QT, Python, C++; MySQL, InfluxDB, SQLite, Docker, Ignition for secondary development. The Embedded controller comes with 4 serial ports, 1 CAN port, 2 Ethernet ports(1 100M Ethernet port, 1 Gigabit Ethernet port), 2 Digital inputs, 2 Digital outputs, 2 SIM card slots, 1 Mini PCIe expansion slot for 4G/WiFi module.
Model POE-S2004FB Ports 4 10/100Mbps POE + 2 10/100Mbps Uplink Power Input AC 100-240V, 50/60Hz, 1.0A Max. Power Output DC 48-57V, 80W (Rated), Full Load Max. 65W (Net Output) Max. 60W for 1st PoE port Max. 30W for 2nd~4th PoE port Data Exchange 10/100Mbps (Gigabit is optional and available), Store and Forward Bandwidth/MAC 1.6Gbps, 1K Package Forwarding/Buffer 1.15Mpps, 768K Power/Data Assignment Power: pin 1,2 + pin 3,6 - ; Data: pin 1,2,3,6 Ambient Environment Operating temperature: -10~55 Storing temperature: - 40~75 Operating Humidity: 5%~90% RH, No condensing Storing Humidity: 5%~95% RH, No condensing Network Protocolï¼? IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at/PoE++ Power over Ethernet cable pairs or device IEEE 802.3x Flow control IEEE802.1q VLAN Network bridge operation Data Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Network Medium 10Base-T: Pair 2 Category 3,4,5(Cat3,4,5) UTP/STP(â?¤250m) 100Base-TX: Pair 2 Category 5(Cat5) or better UTP/STP(â? 150m) System Mode Standard Free communication VLAN Port Isolation 250m Supper long-distance transmission Lightning Protection 3KV 8/20us Certificate CE, FCC, RoHS Warranty 1~2 years Size/Weight PoE Switch Size: 190mm*130mm*33mm (L*W*H) Packing Box Size: 310mm*210mm*60mm (L*W*H) Net Weight: 0.9kg, Gross Weight:1.1kg
4G wireless remote network fault monitoring terminal RTU5028E can be used for disconnection and power failure network fault monitoring, applicable to the state monitoring of server rooms, base stations, laboratories, network cameras, servers, etc.. It can automatically determine the cause of failure of 7 network devices, distinguish whether the network device failure is caused by network failure or power failure, and can automatically or manually restart the device remotely to solve the failure problem, which greatly improves the efficiency of network equipment operation and maintenance. 1.Multi-way real-time monitoring of network disconnection + power failure + network cable failure; 2.Supports simultaneous monitoring of 7 network devices, including WiFi devices; 3.Automatically determine whether a network device failure is caused by a network or a power outage; 4.Automatic or manual remote reboot of the device to solve problems quickly; 5.Built-in 4G and Ethernet communication method; 6.Support BLIIoT Cloud and SCADA and other monitoring centers;
S275 is a 4G RTU with IIoT data acquisition remote monitoring and control SMS alarm functions it is widely used in remote data acquisition and monitoring of various industries such as smart grid smart transportation industrial automation smart building firefighting public safety environmental protection meteorology digital medical agriculture forestry water coal mining petrochemical and other fields 8 digital input 4 relay output 6 analog input and 1 temperaturehumidity input 1 RS485 serial port Modbus RTU MasterSlave can expand multiple Modbus Slave devices Max 320 data points Embedded TCPIP stack supporting Modbus RTU Modbus TCP and transparent transmission Builtin powerful telephone and SMS alarm function regular reporting abnormal upper and lower limit alarm Local logic control of the device linking relay outputs based on monitoring of digital input and analog value thresholds Antidropout mechanism to ensure the device always online and it comes with data retransmission function Support remote configuration remote management and remote restart by SMS Builtin powerful timer function support timed automatic reporting timed daily SMS timed online timed offline timed restart timed execution relay output etc
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifi-cations for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0 to 70 C.
DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance. DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots. The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution. The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
Redundant Dual Rate Transponder 10 Gbps Repeater/Converter/Transponder This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Media conversion Signal repeating Lambda conversion 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP28 Multi-Rate Quad Transponder 125Mbps~32 Gbps Repeater/Converter/Transponder SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc. The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Multi-rate supports 1Gbps ~ 32Gbps Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10/16/32Gbps CPRI;2/3/4/5/6/7 1G/10G/25G Ethernet SDH STM-4/16/64 Media conversion Signal repeating Lambda conversion The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP28 Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module is also suited for the use as a repeater,The SFP28 transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
