Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
poe injector 60w
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter PoE Injector for camera Description
Key Features Wall-mounted
Part Number PT-PSE106GW-AR-D
Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input DC Input Voltage: 36 to 72 Vdc
DC Input Current: 2.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 380gï¼?13.4ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals CE/FCC
PT-PSE106GW-AR is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.
PoE Injector supplier:Creative Lianjie Network Technology Co., Ltd
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon.
Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. UL certification PoE operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender).
high quality PoE Injector Specifications
Parameter Description
Key Features Wall-mounted
PoE Injector Part Number PT-PSE106GW-AR
Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1
Regulatory Compliance
IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () and 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input AC Input Voltage: 100-240 Vac
Frequency: 47 to 63Hz (50/60Hz Typ.)
AC Input Current:1.5A
Working Environment Operating Temperature: 0 to 40
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20 to 70
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Line-Earth 1.2/50us (8/20us): 6KV
Line-Line 1.2/50us (8/20us): 4KV
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
Mechanical Characteristics Case: Plastic
Color: Black
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 193mmX 85mmX 41mm
Weight: 425gï¼?15.0ozï¼?
LED Indicator Power Indicator : Green
PoE Load Indicator : Green @â?¤30W
Blue @ï¼?30Wâ?¤60W
Warranty 2 year
Safety Approvals cUL/UL/FCC/CE/PSE/SAA/BIS
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection.
Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
China PoE Injector for IP Cameras
Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.
PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd
injecteur poe Specifications
Parameter Description
Key Features Industrial PoE can be outdoor use by covered with waterproof case
Surge protection at PoE port
Gigabit data rates
12-48VDC input make it possible for solar application
DIN Rail mount
IP40 high-impact metal enclosure
Extend temperature from -40 to 65
Diagnostic LEDs
Part Number PT-PSE105GB-E
Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5(+), 7/8(-) & 1/2(-),3/6(+)
Output Power Voltage: 55Vdc
User Port Power: 90W Guaranteen
Input DC Input Voltage: 12 to 48Vdc
DC Input Current: 8.0A
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 144.5mmX 95mmX 35.4mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator Power Indicator: Green
PoE Load Indicator: Yellow
Warranty 2 year
PT-PSE105GWS-2D is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp.
PoE Switch for base stations
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device.
PoE Switch for Ethernet terminals
Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. It operates with a wide input voltage of 44-57 VDC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender)
We also provide poe adapter, PoE Splitter for wireless APs
PoE Switch for VoIP phone China Specifications
Parameter Description
Key Features Industrial Boost PoE
Solar Application
Lighting Protection
DIN Rail
Part Number PT-PSE105GWS-2D
Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps
Output Pin Assignment and Polarity:
4/5 (+), 7/8 () & 3/6 (+), 1/2 ()
Output Power Voltage: 55Vdc
User Port Power: 60W Guaranteen
Input DC Input Voltage: 44 to 57 Vdc
Working Environment Operating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40 to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 4KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical Characteristics Case: Metal
Color: Black
Mounting: DIN-rail
IP Rated: IP40
Connectors: Shielded RJ-45*2
Size: 144.5mmX 104.2mmX 60mm
Weight: 400gï¼?0.88lbï¼?
LED Indicator PowerIndicator: Green
PoE Load Indicator: Yellow
SFP Indicator: Green
Lan Indicator: Yellow
Warranty 2 year
Safety Approvals CE
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
PRODUCT FEATURE:
REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
2610 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
1G3F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access.
1G3F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
1G3F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
1G3F+WIFI+CATV series is designed by Realtek chipset 9603C.
WS-C3750G-24PS-E data sheet
Manufacturer Part Number WS-C3750G-24PS-E
Product Type Managed, Stackable 24 ports L3 Switch
Form Factor Fixed, Rack Mountable 1U, Stackable/Clustering
Switch Port density - Uplinks 24 x 10/100/1000 Ethernet Ports
Control cabinets according en 60-204/1, vde 0113
Cables 600/1000vac, in accordance with iec 60502
Circuit diagrams according to din 40719
Rated voltage 380/220vac tn-s
Frequency 50hz + -0.5@
We shall design as your request, fabricate.
25G SR,LR SFP28 optical transceiver with the features of IEEE802.3by, SFF-8472 low consumption and high reliability,suitable for data center,25G Ethernet and fiber channel.
Techwin vector network analyzer for manufacturing wireless device
We will try our best to provide products similar to Keysight like X-series vector network analyzer(MXG, EXG,CXG), Rohde & Schwarz vector network analyzer like R&S FSW Signal and Spectrum Analyzer and R&S FSWP Phase Noise Analyzer and VSO Tester, Tektronix vector network analyzer like RSA5000B Real Time Spectrum Analyzer, Anritsu vector network analyzer like MS2090A Field Master Pro and MS2720T Spectrum Master.
You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on.
Product Overview:
Techwin TW4650 series vector network analyzer is consist of 10MHz13.5GHz, 10MHzï½?26.5GHz and 10MHzï½?43.5GHz. Techwin TW4650 series reduces cost and enhances price-performance ratio but still maintains the same critical technical specifications with those of high performance instrument, such as sweep speed, dynamic range etc. Techwin TW4650 series offers multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual-port and E-cal. Multiple display types are embedded like logarithm amplitude, linear amplitude, standing-wave, phase, group delay, Smith chart, polar coordinates. Many standard interfaces are available including USB, LAN, GPIB, VGA etc. They can precisely measure characteristics of amplitude-frequency, phase-frequency, and group delay and so on.
Main Features:
Flexible calibration types, compatible with multiple cal kits
Support complicated testing solutions with many windows, multiple channels and fast operation
Multiple display types like logarithm amplitude, linear amplitude, standing-wave ratio, Smith chart etc
With USB, GPIB, LAN and VGA
English operation interfaces, 12.1 inch 1280*800 high-resolution multi-point touch screen
Record/Run, one-button operation simplifies measurement setup and improves working efficiency
Functions:
Flexible calibration types, compatible with multiple calibration kits
Techwin TW4650 series vector network analyzer can give you various calibration types, including guided calibration (auto cal), non-guided calibration (using mechanical cal kits for through response, through response and isolation calibration, single port calibration, enhanced response calibration, full dual-port SOLT calibration, TRL calibration), ECal. Different cal kits can be selected, like coaxial calibration kits or ECal kits, according to actual measurement needs, to make measurement easy for devices of diversified interfaces.
â?¢ Multiple windows display all measurement channels
The analyzer supports up to 64 channels and displays up to 32 measuring windows simultaneously, with up to 16 trace curves displayed in each window at the same time, allowing more visual observation and more convenient operation.
G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.
Features
Be tallied with HART7.0
HART master and Modbus slave mode
4~20mA analog signal overlay HART digital signal
Support 15 HART slave device
Configure gateway by special software
Write protect user data
RS485 Modbus interface
LED power and communication indicating
Standard DIN rail installation
M0310 module makes it possible to convert Modbus RTU protocol directly to HART protocol. Using M0310 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to HART protocol. M0310 module is provided with two LED indicating lights, used to indicate the current working status.
Features
Comply with HART PROTOCOL standard V7.0
HART slave station and Modbus master station form
Support 1 Modbus RTU slave device
Support 6 device variables,4 dynamic variables
Configured by HART interface
Write-protection of users data
Support high/low current transfinite alarm
TTL Modbus interface
LED power and communication indicator
MODBUS-RTU master station, comply with MODBUS-RTU protocol
Electrical interface connected with Modbus device supports TTL level
Set MODBUS-RTU slave station via parameters provided by GSD file
Company Information
Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.
Provide FF H1 communication ability to Modbus device
Support standard DD or EDD specification (FF H1)
Electrical interface connected with Modbus device
supports TTL level, RS485 and RS232
G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output.
G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation.
There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure.
SIM: Simulation switch, used for simulation function.
WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random.
RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original.
Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus.
Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.
DAKSH CCTV INDIA PVT LTD - 8 CHANNEL NVR , ALL CH UPTO 5 MP REAL TIME RECORDING
NVR Cramped up with storage issues? The Network Video Recorder a hardware with optimized Operating system that processes the image in the camera itself and sends it to a mass storage device which makes storage hassle free.
2610 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
