1xn plc splitter, smf-28e 0.25mm bare fiber, stainless steel body and box (dimension depends the mode), 1260~1650nm, pigtail and adaptor (sc/apc or fc/apc) are available.
Features:
1. Environmentally stable.
2. Easy installation.
3. Low insertion loss.
4. High uniformity.
5. High reliability.
Designed for indoor residential installation, provides data port, phone port and catv port, 10/100m auto-negotiation, full bandwidth up to 200mbps in full duplex mode.
Features
1. Full ieee 802.3/802.3ah compliance
2. Highest speed pon: 1 gbit/s symmetrical for data, voip or ip video services
3. "plug-and-play" via auto-discovery and configuration
4. Advanced qos functions enable billing by service level agreement
5. Remote management with advanced oam functions
6. Igmp snooping
7. Reduction of video pon onu cost with combination an onu transceiver
8. Low input optical power
4 rj45 ports, 2 voip ports, 1 optical port for gepon, sm, single fiber, 20km, 10/100base-t, max split: 32, wavelength, 1490r/1310t, cli management, rs232 console for debug and cli/telnet, external power, ac220v/dc-12v, 220(w)*136(d)*32(h)mm.
Features:
1. Full ieee 802.3/802.3ah compliance
2. Highest speed pon: 1 gbit/s symmetrical for data, voip or ip video services
3. Plug-and-play+/-via auto-discovery and configuration
4. Advanced qos functions enable billing by service level agreement
5. Remote management with advanced oam functions
6. Igmp snooping
7. Reduction of video pon onu cost with combination an onu transceiver
8. Low input optical power
Complies with ieee802.11g, ieee802.11b standards
Supports wpa , tkip/aes , 64/128-bit wep
Supports 54/48/36/24/18/12/9/6/11/5.5/2/1mbps transfer rates
Provides usb interface
Supports ad-hoc and infrastructure modes
Supports roaming between access points
Supports windows 98se, me, 2000, xp / vista
1). General
The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.
The instrument is supplied with a big lcd to display in various units such as mw (ª8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe typefc/pc
Power ranger+23 dbm to -40dbm
Wavelength ranger800nm ~ 1700nm
Calibrating wavelength850 nm, 1300 nm, 1310nm, 1550nm
Accuracyí0.15db
Resolution0.01db
Displaying unitdb/dbm/watt (mw, uw, nw)
Connectorfc/st replaceable
Battery typeone 9vdc battery
Battery service time (at normal temperature)í²10 hours
Auto shutdown time10 minutes
Working temperature -10ípc to +50ípc
Storage temperature-40ípc to +70ípc
Relative humidity0 to 95% (no condensation)
Dimensions (mm)70 íß 135 íß 24
Weight (kg)0.15
1.Light weight, hand-held, easy-to-use
2.Measure rang up to 30kmíó50kmíó80km
3.Tolerance of measurement is 0.02%
4.Maximum 5 fault events display
5.5 digits of decimal lcd dispaly
6.Red light fault detector is compatible
7.Auto-shut down in 5 minutes
8.Using two aa alkaline batteries, low battery annunciator
Application:
1.Fault location of fiber networks;
2.Fiber length measurement;
3.Fiber networks construction and maintenance;
4.Optical communication system;
5.Fiber catv networks;
6.Security and surveilance system;
7.Fiber lan or pigtail jumper project
Sxr86(75) series field type optical receiver applies 07 type aluminum die-cast waterproof casing. It is supplied with reliable power supply and secondary lightning protection system. Applying integrated optical-electrical module; 1 line forward catv receiving, 2-line or 4-line high radio frequency level output, 1 line backward return optical transmission. The return transmission module can be installed flexibly, and can simultaneously return 2 signal lines and be available to construct a node type optical workstation in hfc network. The unit employs excellent technical indexes for stable operation so it is of high performance/price ratio, which is wise choice for the modern network construction in cities, towns and villages.
The optical power meter sxbk-2a is designed to detect the continuous optical power of wavelength ranged in 800nm-1700nm. With high resolution, it provides calibration points at different wavelength of 850nm, 1300nm, 1310nm and 1550nm, and indicates the optical power in either linear or nonlinear mode.
The instrument is supplied with a big lcd to display in various units such as mw (8w, nw), dbm, and db. It also provides functions including automatic range switch, automatic shutdown and battery low alarm. It features small size, light weight, elegant appearance, endurance, simple operation and low power consumption so that it can widely applied in various domains such as cable construction and maintenance, optical communication, fiber sensing, and fiber catv etc.
2). Product parameters
Probe type ¦fc/pc
Power ranger¦+23 dbm to -40dbm
Wavelength ranger¦800nm ~ 1700nm
Calibrating wavelength¦850 nm, 1300 nm, 1310nm, 1550nm
Accuracy¦a0.15db
Resolution¦0.01db
Displaying unit¦db/dbm/watt (mw, uw, nw)
Connector¦fc/st replaceable
Battery type¦one 9vdc battery
Battery service time (at normal temperature)¦10 hours
Auto shutdown time¦10 minutes
Working temperature¦ -10c to +50c
Storage temperature¦-40c to +70c
Relative humidity¦0 to 95% (no condensation)
Dimensions (mm)¦70 135 24
Weight (kg)¦0.15
DYLINK EX101D Features
ò Extends any DVI compliant device up to 100 meters from the computer Uses single CAT-5/5e/6 cable
ò Supports VESA Standard resolutions and HDTV resolution
ò Supports DDWG standard for DVI compliant monitors
ò Improved compensation for cable skew
DYLINK EX101D Specifications
Video Amplifier Bandwidth 1.65 GHz
Single Link Range 1920 x 1200
DVI Input/Output Connector Type DVI-I (29 pin) female (Digital Only)
LED Indicators Local unit : 1 x Power
Remote unit : 1 x Power
Dimensions(W x H x D) Local unit : 120mm x 64mm x 29mm
Remote unit : 120mm x 64mm x 29mm
Power Supply Local unit : No
Remote unit : 12V/2A DC
Link connector RJ-45
Features:
í(Distributes computer DVI graphic signal to 2, 4 or 8 displays simultaneouslyí(DVI input and output: using standard DVI-I
í(Support DIV 1.0
í(Support DVI Single Linkú¼DVI-D. Very High Video Quality - up to 1920x1080, Bandwidth: 165MHz
í(Support DDWG standard
Support 10m from DVI output to Switch and from DVI Switch to monitor.
DVI Splitter also called DVI Share, DVI Distribution, DVI Video Splitter or DVI Video Distribution.
The DYLINK have 2 port DVI Switch DVISW201A (SW201D), 4 port DVI Switch DVISW401A (SW401D), 8 port DVI Switch DVISW801A (SW801D). We have export to Europe and USA for two years.
And the DYLINK have DVI series productsú¼such as 2 port DVI Switch DVISW201A(SW201D), 4 port DVI Switch DVISW401A(SW401D), 8 port DVI Switch DVISW801A(SW801D) and DVI Extender EX101Díú
The DYLINK DVI KVM Switch is an electronic keyboard/video/mouse (KVM) switch that controls several PCs from a single keyboard, monitor, and mouse. This DVI KVM Switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER.
Features:
í(Support DVI Single Linkú¼DVI-D. Very High Video Quality - up to 1920x1080, Bandwidth: 165MHz
í(Support DVI 1.0 standard
í(DVI input and output: using standard DVI-I
í(Support 10m from DVI output to Switch and from DVI Switch to monitor.
í(Support all DVI PCs power on simultaneously
í(Keyboard and mouse emulation - computers boot even when the console focus is elsewhere
í(Front panel push button and hotkey commands for easy computer selection
í(Support auto scan function
The DYLINK have 2 port DVI Switch DVISW201A (SW201D), 4 port DVI Switch DVISW401A (SW401D), 8 port DVI Switch DVISW801A (SW801D).
SUNDE is the independent terminal based on network computing; it is the computer terminal without CPU, HD and CD-ROM, usually called Thin Client.It allows many users to share the resources of the host computer.
Single packing: white box
Carton packing: 20pcs/ctn
Carton size: 27*50*35cm
G.W.: 11.5KGS
Features
Compatible with all home and office telephones, two switches beside to be adjusted when necessary.
Increasing Incoming volume 3 times (about 30dB), with an adjustable fingertip control.
Perfect your hearing in noisy environments.
Amplifies automatically when you lift the handset.
Automatic Control Circuit minimizes levels of distortion.
Connects between handset and phone base easily, no wiring involved.
Light weight, compact and portable for travel.
Use 2 standard AAA batteries.
Powers automatically turn on/off to increase battery life.
1 year manufacturer's warranty provided.
Features: (optional items:rotary axis), distinctive feature- work table is moving back and forth
1) machine body: whole cast aluminum
2) work dimensions: 300 x 300 x 45mm
3) body dimensions: 600 x 600 x 600mm
4) z-axis working area: 45mm
5) max. Feeding height: 60mm or bigger
6) cut thickness of material: ín20mm
7) max. Speed: 4200mm/min
8) working speed: 0 - 3, 000mm/min
9) mechanical precision: 0.01mm
10) software: type 3 software, artcut software, artcam software
11) max. Power consumption: 900w
12) power source: ac 220/50hz or 110v/60hz
13) driver type: stepper motor
14) spindle: 800w variable speed, water-cooled motor
15) spindle speed: 0 - 24, 000rpm
16) blade diameter: 3.175mm, 4mm, 6mm
17) control system: ncstudio
18) command: g code, u00, mmg, plt
19) relative humidity: 30% - 75%
20)pack dimensions: 750 x 750 x 750mm
21)net weight: 70kg
22)gross weight:90kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, cu and al molding, mold manufacturing, wood processing, craft manufacturing, light box cutting, building mold cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, as well as stamp cutting and pcb cutting
Pack dimensions: 750 x 750 x 750mm
Net weight: 70kg
Gross weight:90kg
Features: (optional items:Rotary axis)distinctive feature- work table is moving back and forth
1) Machine body: whole cast aluminum
2) Work dimensions: 300 x 300 x 45mm
3) Body dimensions: 600 x 600 x 600mm
4) Z-axis working area: 45mm
5) Max. Feeding height: 600mm or bigger
6) Cut thickness of material: í_20mm
7) Max. Speed: 8000mm/min
8) Working speed: 0 - 6,000mm/min
9) Mechanical precision: 0.01mm
10) Software: type 3 software, Artcut software, Artcam software
11) Max. Power consumption: 900W
12) Power source: AC 220/50Hz or 110V
13) Driver type: stepper motor
14) Spindle: 800W variable speed, water-cooled motor
15) Spindle speed: 0 - 24,000rpm
16) Blade diameter: 3.175mm,4mm,6mm
19) Control system: Ncstudio
20) Command: G code, u00, mmg, plt
21) Relative humidity: 30% - 75%
22)Pack dimensions: 750 x 750 x 750mm
23)Net weight: 90kg
24)Gross weight:110kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu and AL molding, mold manufacturing, wood processing, craft manufacturing, light box cutting, building mold cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, as well as stamp cutting and PCB cutting
Pack dimensions: 750 x 750 x 750mm
Net weight: 90kg
Gross weight:110kg
Features:
1) Machine body: whole cast iron
2)Guideway:XYZ-axis use cylindrical guideway
3)Driving mode:ball screw
4) Work dimensions: 600 x 900 x 70mm
5)Body dimensions: 800 x1, 200 x 1,200mm (with bracket)
6) Z-axis working area: 70mm
7) Max. Feeding height: 900mm or bigger
8) Cut thickness of material: í_30mm
9) Max. Speed: 6,000mm/min
10) Working speed: 0 - 5000mm/min
11) Mechanical precision: 0.01mm
12) Software: type 3 software, Artcut software, Artcam software
13) Max. Power consumption: 1.6kW
14) Power source: AC 110/220/50-60Hz
15) Driver type: stepper motor(xyz -sxis use 57BYG motor)
16) Memory: 128MB or without
17) Spindle: 1.5kW variable speed, water-cooled motor
18) Spindle speed: 0 - 24,000rpm
18) Blade diameter: º¦3.175mm, 4mm,6mm
19) Control system: (NCSTUDIO) or DSP (USB interface)
20) Command: G code, u00, mmg, plt
21) Running circumstance temperature: 0 - 45ípC
22) Relative humidity: 30% - 75%
Packing:
Packing dimensions: 900 x 1,350 x 1,300mm
Net weight: 250kg (with bracket)
Gross weight: 330kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing Cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment molding processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.
Packing:
Packing dimensions: 900 x 1,350 x 1,300mm
Net weight: 250kg (with bracket)
Gross weight: 330kg
Our CMTS can support both US DOCSIS1.1 and EURO DOCSIS1.1. It can also be compatible with DOCSIS2.0 cable modem. It not only affords gateway service to HFC network and external network, but also offers broadband data and video transmission services that based on IP. To buy our CMTS, we afford the NMS3.3 (net manage system) for free.
2666 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
