A Cellular Eth Router. It supports 2*100Mbps Ethernet interfaces, 1*RS232/RS485 serial port, LTE network access with Dual SIM slots for the failover, designed for the industrial. The configurable serial port transmits the narrow-band data from the machine, and the Modbus feature supports RTU converts to TCP easily.
Hardware Specifications:
2* 10/100Mbps Ethernet ports
2* SIM card slot (backup/failover)
2* 4G antenna
1* FUNC button
1* GPS antenna(optional)
1* 3 standard core power interface
4G/3G/2G access The frequency bands could be customized
Dimension: 179mm*135mm*34mm
Structure design: the high-duty metal case
Power consumption: 24W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 1095%RH
Store temperature: -40+85C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
Multi-WAN Function
LTE+SFP Fiber+Ethernet Load Balancing
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
(VPN optional, GRE over IPSec, IPsec over L2TP.)
802.1Q VLAN and QinQ
Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly)
Log function
The SIM7600CE is Multi-Band LTE-TDD/LTE-FDD/HSPA+/TD-SCDMA/EVDO and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT4up to 150Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,GPIOetc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module providesmuch flexibility and ease of integration for customer's application.
General features
* Quad-Band TDD-LTE B38/B39/B40/B41
* Tri-Band FDD-LTE B1/B3/B8
* Dual-Band TD-SCDMA B34/B39
* Dual-Band UMTS/HSDPA/HSPA+ B1/B8
* CDMA 1X/EVDO BC0
* GSM/GPRS/EDGE900/1800 MHz
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢??to +85�¢??
* Dimension: 50.80*31*5.35mm
* Weight: 5.5g
* GNSS gpsOneGen 8B;standalone;assisted,XTRA;
Specifications for Data transfer
* LTE CAT4-Uplink up to 50Mbps, -Downlink up to 150Mbps
* TD-SCDMA-Uplink up to 128Kbps, -Downlink up to 384Kbps
* TD-HSDPA/HSUPA -Uplink up to 2.2 Mbps, -Downlink up to 2.8 Mbps
* HSPA+ -Uplink up to 5.76Mbps, -Downlink up to 42 Mbps
* UMTS-Uplink/Downlink up to 384Kbps
* EDGE Class-Uplink/Downlink up to 236.8Kbps
* GPRS -Uplink/Downlink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installationfor windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
The SIM7500SA is Multi-Band LTE-FDD/HSPA module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.
General features
* FDD-LTE B1/B3/B5/B7/B8/B28
* Dual-Band UMTS/HSDPA/HSPA+ B1/B5
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢?? to +85�¢??
* Dimension: 24*27*2.75mm
* Weight: 4.0g
Specifications for Data transfer
* LTE CAT1
- Uplink up to 5Mbps,
- Downlink up to 10Mbps
* HSPA+
- Uplink up to 5.76 Mbps,
- Downlink up to 42 Mbps
* WCDMA
- Uplink/Downlink up to 384Kbps
* CSD
- WCDMA data rate 57.6Kbps
- WCDMA 64kbps CSD for Video call
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installation for windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
Transform the way you CONNECT, COMMUNICATE and COLLABORATE at your Enterprise. These high performance IP PBX appliances for the enterprise provide optimized performance, scalability and redundancy for Enterprise communication networks. Up to 70 Concurrent Calls Up to 600 Extensions 30 Party Conference Supports PRI / SIP / GSM Trunks Auto Attendant & Voice Mail Software based Operator Console.
600 Extension, 70 Concurrent Calls.
Supports Analog, Ip Phones, Soft Phones.
Auto Attendant And Voice Mail.
Multiple Conferences Upto 30 Party.
Software Based Operator Console and Call Monitoring.
2665 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
Dialtronics VoLTE Gateways Turbocharge enterprise voice networks with high performance, High availability and Service Intelligence for resilient operations and Simplified management of Enterprise Voice Networks.
Best suited for Enterprises and Call Centers deployments addressing the future needs for scale and feature capacity
Industrial design, stable and reliable, suitable for harsh environment;
Support 4, 8 and 16 digital DO outputs, widely used;
DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz;
DO2 can be used to control the direction output of stepper motor and servo motor;
1 RS485 supports Modbus master and slave protocol for expanding IO or HMI;
One RJ45 Ethernet interface supports TCP Server and TCP Client services;
Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms;
As a TCP server, it can support 5 TCP links at the same time.
1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design;
2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable;
3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
4. 3G/4G/NB-IoT Modules are optional;
5. Modular design, can easily upgrade the cellular module if network upgrade;
6.Support 1 channel relay output for restart the devices;
7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation;
8.Up to 10 user's phone number to receive alarm and daily report SMS/Call;
9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously;
10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol;
11.Inbuilt large capacity automatically rechargeable backup battery;
12. Industrial class design suitable for long time work applications;
13. Support configure parameters, load profiles and upgrade the firmware via PC;
14. Wall mount or 35mm standard DIN rail Design, convenient installation,
15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;
5. Management and configuration via LAN connection configuration software for easy operation and maintenance;
6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices.
1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable.
2.Converting the data protocol of Mitsubishi PLC into Modbus
TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1
channel TTL.
3.Support 1 channel RJ45 Ethernet port
4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error.
5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications.
6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface.
7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol.
8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring.
9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
DK-nDCt/RJ45 5-24L Rack-mounted Network Signal Surge Protective Device is designed according to the IEC lightning protection standard. Adopted integration of all metal structure, standard RJ45 and 19 Inch 1U cabinet-mounted, it can be used in the lightning protection of integrated network signal equipments. It takes the advantages of large throughput, fast response, and other features, making sure the equipments to work normally.
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km.
TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8.
EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems.
PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches
OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
OLT ZTE C320 OLT GPON With GTGO GTGH 8 Ports 16 Ports 32 ports 1G 10G DC Uplink Board with U31 zte olt zxa10 c320
Products Description:
With the requirements of communication services increasing, the value-added services (VAS) including 3D network games, video conference/phone, Video on Demand (VoD) and IPTV are key means for operators to provide differential services to attract more subscribers, and gain income growth.
ZTE ZXA10 C320, a small size, full-service optical access convergentplatform, provides carrier class QoS and reliable network to meet the requirements for small-scale implementation of FTTx services.
Unified platform for GPON,XG-PON1 and P2P
Small size andcompact design, flexible network and fast deployment
2U frame with 2 service slots, compatible with ZXA10 C300 line cards
Abundant service support capability: IPTV, VoIP, HSI, VPN, mobile backhaul, etc
Higher security assurance: ONT authentication, user ID identification, port isolation, address binding, packet filtering, and broadcast packet suppression.
High reliability: key parts redundancy; support Type B and Type C protection for PON downlink and LACP/ UAPS/STP/ERPS for uplink
Service differentiation: Comprehensive QoS mechanisms for voice, video and high speed Internet services.
Support DC input redundancy
Support AC power supply
Support 1:1 protection for PON interfaces
Support 1:1 protection for SW (core card) card
Support 1588V2 and Synchronous Ethernet
Support embedded OTDR in SFP
Syetem Architecture:
Capacity:
GPON up to 32 ports
Uplink interfaces up to 4 *GE (Optical )+2*GE(Electronic) or 2*10GE(Optical )+2*GE(Optical ) +2*GE(Electronic)
Chassis Configuration (19â??):
Total 5 slots
2 slots for universal line cards
2 slots for switch& control cards
1 slot for fan module
Subscriber Card Density:
GPON card: 8/16 ports per card
XG-PON1 card: 8 ports per card
P2Pcard: 24/48 ports per card
Uplink interface card:
1*10GE optical port ( Configurable 1*GE optical port)
1*GE optical port
1*10 M/100 M/1000 M electrical Ethernet port
Common interfaces:
1*environment detecting interface
1*management interface
1*maintenance serial interface
Product Features
4 WDM lanes MUX/DEMUX design
4 WDM channels are 1296, 1300, 1305 and 1309 nm
Hot-pluggable CFP2 footprint
RoHS compliant and Lead Free
Up to 10Km link length
Power dissipation
Sell POE Industrial Switch 1 SPF + 6 RJ45 Port
Description:
It provides a stable and reliable Ethernet transmission offered by Opticombine, with high-quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence, and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users.
The Industrial Media Converter complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy maintenance. It offers redundant mechanisms for critical applications that need always-on connections.
Features:
1. Support Auto-MDIX, and full/half-duplex self-negotiation mode
2. Provide SC/LC/FC/ST interface fiber port & support single/dual fiber transmission
3. Support 10K Bytes giant frame, compatible with various extension protocol
4. Support IEEE802.3az energy-efficient Ethernet technology
5. 4K MAC address table
Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment, and components.
It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities.
We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation â?? knowing that our employees are the key to our success.CC:
CC:
2665 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
