This FiberHTT 1550 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The SFP+ 80km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This FiberHTT 1310nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This Hengtaitong 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
This FiberHTT 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2km. The SFP+ 2km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The Hengtaitong SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with atrans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
The FiberHTT HPBT3R2-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-LR module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC
The FiberHTT HPBT2R3-LR single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT2R3-LR module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT HPBT3R2-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT H9S3124-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of 1310nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B5324-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx 1550nm Rx1310nm. The transmitter section incorporates an advanced DFB and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B3524-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx1310nm Rx1550nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Hot Pluggable QSFP28 form factor Supports 101.3Gb/s aggregate bit rate Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF Single MPO-12 receptacle Power dissipation:
FiberHTT 100G QSFP28 LR4 integrates four transmitter and receivers into one module. In the transmitter side, the four lanes of optical data channels are optically multiplexed by the integrated optical multiplexer. In the receive side, the four lanes of optical data channels are optically de- multiplexed by the integrated optical de-multiplexer. Each data channels are recovered by a PIN photo- detector and trans-impedance amplifier, retimed. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA) and compliant to IEEE 802.3ba.
This product is a smart home security alarm system, which combines home security, healthy life and elderly care. It transmits alarm information through dual network of Wi-Fi and GSM, simple, safe and fast. Bluetooth network configuration, faster and more stable! Wherever you are in office, or on a business trip at abroad, it is with you. You could know the status of your smart intruder alarm system, monitoring whatâ??s happening in the house, keep close to your parents, even whatâ??s the humidity and temperature indoor and outdoor. It make you enjoy a safe and smart life. Features are as follows: (1) APP supports Apple and Android systems. (2) Bluetooth network configuration, faster and more stable! (3) There is no limit to the number of alarm hosts that can be bound to each smartphone; each user of the alarm host can log in through administrator or general member mode, of which the administrator is limited to one person and the number of general members is unlimited. (4) Can set 5 groups of SMS alarm numbers and 5 groups of phone alarm numbers. (5) Supports 99 wireless defense zones, 30 fire defense zones, 8 emergency call defense zones, 8 medical rescue defense zones, 4 water leakage defense zones, and can be equipped with 20 remote controllers or access control keypads (the remote controller can also be used for emergency alarm); 4 wireless sirens can be configured. (6) Scan the QR code to add wireless accessories to the host, accurate, convenient and fast. (7) The default setting includes seven languages and voice switching (Chinese, English, Russian, Spanish, French, German, Italian). (8) Two-way intercom function; (9) Timed arming, timed disarming and timed stay function (each timer can be set for three groups of time); (10) WIFI failure and telephone network failure prompt function; (11) Door and window open reminder function; (12) Detector low battery prompt function, detector offline prompt function (13) Supports delayed alarm function, delayed arming and delayed disarming function (0-99 seconds optional); (14) When the host alarms, the srien sounding time can be selected (0-254 seconds or always sounding); (15) In addition to the APP, you can also remotely control the arming and disarming of the host by SMS or dial buttons during a phone call; (16) The host has the function of staying on defense (only valid for intrusion defense zones 1-99); (17) Can record 10 seconds of alarm voice; (18) External power failure/recovery alarm function (optional to turn on or off); (19) Remote arm/disarm siren sound prompt function (optional to turn on or off); (20) Remote controller arm/disarm SMS reminder function (optional to turn on or off); (21) Door and window opening/closing reminder function in disarmed state (optional to turn on or off).
NE2-D11 single serial port server is used to realize the two-way transparent transmission of data from serial port to Ethernet port. It has a variety of Modbus gateway modes and MQTTC/HTTPC Internet of Things gateway modes,which can meet the networking functions of various serial port devices/PLC; Adopt industrial design standards to ensure the reliability of equipment.
The E103-W12 series is an ultra-low power WiFi module developed by Chengdu Ebyte Electronics Co., Ltd. based on the Dialog DA16200 SoC chip that supports IEEE 802.11b/g/n. It has a built-in high-performance ARM Cortex-M4 processor and works at 2.4~2.4835 GHz frequency band, the maximum wireless transmission power can reach 20dBm. The module supports IEEE802.11 b/g/n standard. The module supports AP and STA modes, supports multiple network transmission protocols such as TCP/UDP/HTTP/MQTT, and can maintain WIFI connection in low power consumption mode.
E106-915G27P2 comprises complete and cost efficient LoRaWan gateway module in the industry standard PCI Express Mini Card form factor, which enables an easy integration into an application board and it is also ideal for manufacturing of small series.
E78-470LN22S (6601) is a standard LoraWan node module designed and produced by Ebyte. It works in the frequency band CN470~510MHZ. It supports CLASS-A/CLASS-C node types and supports two network access methods: ABP/OTAA. At the same time, this module has It has multiple low-power consumption modes, and the external communication interface adopts standard UART. Users can access the standard LoraWan network through simple configuration through AT commands. It is an excellent choice for IoT applications.
E810-DTU (RS) is a high cost-effective RS232 to RS485/RS422 isolated interface bidirectional converter independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. This product is featured by its small size, simple wiring, convenient installation, etc. It is a reliable assistant tool for engineering application, project debugging and product development.
E32-433T20S is a wireless serial port module (UART) based on SEMTECH's LoRa solution. It has a variety of transmission modes, working at 410MHz~441MHz, (default 433MHz), LoRa spread spectrum technology.
