Eneroil offshore has developed its Single piece Bow Centralizer (S12) model to perform satisfactorily in Open hole as well as Cased hole. These are high quality product, developed to meet and exceed API10 D specifications for use in highly demanding downhole conditions.
Eneroil's Single piece Glider Centralizer (S12) combines the highest restoring force with zero starting force and zero running force. Single piece centralizer is used to position the casing in the center of the wellbore in vertical deviated and horizontal wells, reduce the effect of channeling by reducing pipe movement before Cement sets in and improving the cement flow, this results in more uniform cement thickness in the well bore. S12 centralizers are one piece construction in special high strength Steel which imparts excellent hardness and spring action ensuring an unmatched ability to come back to its original shape after undergoing rigorous stress loads conditions.
Eneroil developed the Solid Body Low Drag Roller Centralizer as axial drag friction reduction tool. The contact area of the rollers with the casing or borehole wall functions well in under pressured conditions, where the risk of differential sticking is high.
The Low Drag centralizer with steel rollers helps to avoid ploughing through wellbore material that has settled, alleviating major drag problems in deviated and horizontal wells.
Solid Body Low Torque Roller Centralizers are specifically built to run in an inclined or horizontal section. The rollers outside diameter are kept slightly larger than the centralizer blades outer diameter.
When casing equipped with Solid Body Low Torque Roller Centralizer runs into the deviated or horizontal hole, sliding friction between the casing and the borehole is converted into rolling friction. In case of irregular hole diameter, the borehole wall has an impact force on the spiral centralizer during running casings, the use of rollers reduce this impact.
Eneroil Offshore Offers full range of casing centralizer which includes Bow Spring Centralizer(welded / Non-welded), Solid Centralizers, Solid Rigid Centralizers, Positive Centralizers, Gemoco Centralizers, Roller centralizers and Thermoplastic centralizers.All the products are of high quality and comprises of the standard set by API and ISO.
Single Piece Casing Centralizer
Product Description
API single piece centralizer performs satisfactorily in open hole as well as cased hole.These high quanlity product,developed to meet and exceed API 10D specifications for use in highly demanding downhole conditions.Single piece centralizer combines the highest restoring force with zero start force and zero running force.The single piece centralizer is used to position the casing in the center of the wellbore in vertical deviated and horizontal wells.
The single piece centralizers are one piece construction in special high strength steel which imparts excellent hardness and spring action ensuring an unmatched ability to come back to its original shape after undergoing rigorous stress loads conditions.
The single piece centralizers are available in size 4-1/2" to 20".Any special sizes or combination can be available on requirment.
This centralizer undergoes a special Iron Phosphate coating process to prevent it from rust and coated with special Polyester Powder. It is shipped in assembled condition only. When shipping them,in order to save space and shipment charges for customers,we usually put the smaller size centralizer into bigger size centralizer.
Hinged Non-welded Casing Centralizer
Product Description
Casing centralizer is one of the necessary conventional casing accessories, upon well operationscompletion, the rational use of casing centralizer can play the role of:Reducing lower casing resistance phenomenon, making the casing smoothly down to the design position; Making casing centralizer centered within the well; Reducing the sticking phenomenon to make the annular space hydrostatic pressure balanced; Reduce channeling, improve the mud replacement efficiency, thus improve the cementing quality.
The reset force of double bow type centralizer is higher than that of single bow centralizer, centering centering performance is better than that of single bow type.
Bow-spring centralizer
1.These Centralizers are designed for High Restoring Force and Low Starting Force for centralizing the casing pipe in a Vertical, Horizontal and Deviated well
2.Premium quality Bows are made of special alloy steel and hot formed in totally controlled heat treatment plant to achieve the uniform hardness all over
3.Spec and performance index of bow spring casing centralizer meet API Spec 10D. The woven centralizer is connected by pin when in use, the unfolded centralizer can be stacked flatly for convenient storage and transportation.
Rigid roller centralizer
Rigid casing centralizer is used in deviated wells and horizontal wells. There are several blades on the rigid roller centralizerthat can keep casing from contacting the wellbore wall
Roller rigid centralizer
which is most suitable for highly deviated wells and horizontal wells has two or three rollers in each blade. It can change slipping friction to rolling friction, so the Roller rigid centralizer greatly reduces the friction between casing and wellbore wall and let casing go to desired position smoothly.
Cast aluminum centralizer:
The smooth spiral 360 overlap solid vane design of centralizers provide max wall contact will not damage wellhead equipment, has high impact and shock resistance comand fluid swirl. The 30slope from the body to the height of the vane will eliminate scraping, or digging into the formation.
The solid cast aluminum centralizers bine with high tensile and yield strengths
1533 Mining Machinery Equipments Spare Parts Suppliers
Short on time? Let Mining Machinery Equipments Spare Parts sellers contact you.
Sucker rod roller guides will centralize the rod string in your tubing and the rolling action of the wheels inside your tubing walls during stoking, reducing friction and wear caused by the rods slapping or rubbing your tubing.
They centralizer the rod string in the tubing, and the rolling action of the wheels inside the tubing walls during stroking reduces friction and wear caused by the rods slapping or rubbing the tubing. With proper use of the Wheeled Rod Guidesand effective chemical treatment programs, several operators have extended by an average of four times the operating periods between having to pull and service wells because of sucker rod or tubing wear.
Wheels are set vertically and at 45-degree angles to each other, along the axis of the Sucker rod roller guides body.
we are a professional manufacturer of oil downhole tools , high quality and reasonable price .
Any problem about our products , welcome here .
Sharprazor watermelon/String mills are designed to enlarge the hole,open up windows,mill through collapsed casing,polish liner polished bore,clean up perforation section,,restore casing drift and downsize debris generated during cased hole milling or drilling applications.
Our String mills have a tapered top and bottom to allow upward and downward reaming.it has spiraled blades welded with crushed tungsten carbide,full 360° wrap .
Sharprazor string mils use cutting-edge technology, top experienced engineers in this scope to guarantee the quality.Standard sizes from 3-1/2to 28,and customized specification is available to suit specific operational requirements.
Wuxi BODHI Electronic Equipment CO., Ltd is a leading filtration equipment provider founded in 2003. Its head-quarter is located in the garden city Wuxi, China and has a R&D facility in Detroit,USA. Our products have been distributed to more than 45 different countries such as Canada, France, Germany, Netherlands, Mexico and the United States.
During the last decade, BODHI has developed more than 20 series of Mist Collectors and Dust Collectors, with approximately 200 different models. We also offer a wide range of filters to fit different user needs.BODHI not only follows all major quality standards like ISO, ASHRAE,OHSAS, but also develops over 100 patent technologies to meet these standards or above.
china coal0001
18660760281
. Electric Dry Mix Shotcrete Machine
Introduction of Electric Dry Mix Shotcrete Machine
Electric Dry Mix Shotcrete Machine can be used for tunnels, hydro-power engineering, mines, underground engineering, civil engineering and slope stabilization, etc.
Artificial soil seeding for no soil surface, such as rock, sand, and for no fertility soil surface.
Refractory spraying and repair for industrial kilns or kilns?? inner liner.
The characteristics as follows:
(1)Efficient electric motor
(2) Perfect hermetic function and longer serviceable life
(3) Material flow uniformity stable
(4)Improved performance and high quality
Parameter of Electric Dry Mix Shotcrete Machine
Model PZ-7
Capacity (m3/h) 7
Max. Conveying Distance (Horizontal,Vertical m) 200,20
Use material ratio(Cement/Sand) 2001-3-5
Use material water-cement ratio ?¤0.4
Max. Aggregate Diameters (mm) 20
Feeding pipe inner diameters(mm) 64
Rotor Diameter(mm) 480
Working pressure (MPa) 0.4-0.6
Air consumption (m3/min) 8-10
Motor Model Y132-6-7.5KW
Voltage(V) (according to customer's special requirement) 380,660,etc
Overall size (mm) 1500*700*1280
Overall weight (kg) 700
Advantages of PZB Mining Explosion Proof Shotcrete Machine
1. PZB Series Explosion Proof Shotcrete Machine is a high-effective shotcrete machine,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2. Nonadhesion going through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
3. Fourpoint clamping device make it easy to adjust the press between sealing plate and rotordisk so as to no air and dust leak and prolong consumption parts life.,
4. Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shocrete quality.
Parameter of PZB Mining Explosion Proof Shotcrete Machine
Item PZ-5B PZ-7B
Output 5m3/h 7m3/h
Max. convey dist Horizontal:200m Vertical: 20m Horizontal:200m Vertical: 20m
Water cement ratio ?¤0.4 ?¤0.4
Max. Aggregate. size 20mm 20mm
Hose inner size 51mm 64mm
Operating air pressure 0.4~0.6MPa 0.4~0.6MPa
Air consumption 7-8 m3/min 8-10 m3/min
Rotor diameter 438mm 480mm
Motor power Y132m-6-5.5(KW) Y160m-6-7.5KW
Voltages 380v or as your requirement 380v or as your requirement
Overall dimension(mm) 1600X700X1150 1600X700X1150
Whole weight 800kgs 900kgs
china coal0001
18660760281
9.V-shape Coal Miner Hard Hat with Light
Keywords: miner hard hat, miners helmet with light, cordless mining cap lamps, led cap lamp, miners hard hat with lamp, hard hat light
Introduction of V-shape Coal Miner Hard Hat with Light
1.For V-shape Coal Miner Hard Hat with Light, HDPE shell is also available
2. Accessories matchable, such as earmuff & faceshield, miner's lamp
3. Logo printing service to meet clients' demands
4 V-shape top can increase the impact resistance
5. Changeable sweatband & chin buckle
6. Adjustable headband for a sure, comfortable fit
7. Lock type of back hoop:
1). Style X: Turning knob(Ratchet)
2). Style N: Press button(Buckle)
3). Style C: Inserting(Pinlock)
Parameter of V-shape Coal Miner Hard Hat with Light
MOQ
1000pcs
Trade Terms
FOB CIF CNF(Negotiable)
Loading Port
Shanghai/Ningbo(Negotiable)
Payment terms
TT(30% deposit ),LC,DP,Western Union
Packing
Opp bag, 30pcs/ctn
Meas
70x30x80cm
GW/NW
14/13KGS
Qty
5010pcs of 20ft,10380pcs of 40ft,12150pcs of 40HQ
china coal0001
18660760281
PZ-5 Dry Mix Shotcrete Machine
Introduction of PZ-5 Dry Mix Shotcrete Machine
PZ-5 Dry Concrete Spray Equipment is the most ideal device for the concrete anchor spray construction, wet spray and moist spray. And be widely used for the anchor spray supporting construction in tunnel, culvert and underground projects. And uniquely-made rubber bushing block on the swirler benefits mixture delivery. PS-6 has stable performance, is convenient for maintenance, saves energy, has a long service life, protects environment, and improves the spraying layer quality. Our product advantages as follows:
1.Excellent Performance:
2.Tightly compact,attractive appearance,
3.Stable and durable,easy to operate and maintain.
4.Applicable for all kinds of working environment.
5.Mainly used for tunnel,underground work,slope protection and other concrete construction..
Parameter of PZ-5 Dry Mix Shotcrete Machine
Model PZ-5
Capacity (m3/h) 5
Max. Conveying Distance (Horizontal,Vertical m) 200,20
Use material ratio(Cement/Sand) 2001-3-5
Use material water-cement ratio ?¤0.4
Max. Aggregate Diameters (mm) 20
Feeding pipe inner diameters(mm) 51
Rotor Diameter(mm) 438
Working pressure (MPa) 0.4-0.6
Air consumption (m3/min) 7-8
Motor Model Y132-6-5.5KW
Voltage(V) (according to customer's special requirement) 380,660,etc
Overall size (mm) 1280*700*1280
Overall weight (kg) 600
china coal0001
15660760281
PZ-5B Explosion-proof Shotcrete Machine
Explosion-proof shotcrete machine,PZ-5BExplosion-proof shotcrete machine
Features of PZ-5B Explosion-proof Shotcrete Machine
1. PZ-5B Explosion-proof Shotcrete Machine adopt through type rotary, so that can fulfill non-sticky, unobstructed discharging operation, finally get advantages of high efficiency and time-saving.
2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life.,
3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.
4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.
Parameter of PZ-5B Explosion-Proof Shotcrete Machine
Item PZ-5B
Output 5m3/h
Max. convey dist Horizontal:200m Vertical: 20m
Water cement ratio ?¤0.4
Max. Aggregate. size 20mm
Hose inner size 51mm
Operating air pressure 0.4~0.6MPa
Air consumption 7-8 m3/min
Rotor diameter 438mm
Motor power Y132m-6-5.5(KW)
Voltages 380v or as your requirement
Overall dimension(mm) 1600X700X1150
It has 2 types and one is for hot pressing ,the second is for cold pressing .
1.The machine is used to Make edible oil.
Suitable for extracting vegetable oil from different oil-materials, such as peanuts, rapeseeds, sesame seeds, soybeans, cottonseeds, tea seeds, tung tree seeds, sunflower seeds, palm seeds, olive, coconut meat, corn pummels, etc.
The main data
Dimensions(mm): 2900 x 1850 x 3240
Productivity: 7-10/24h for oilseeds
Power(Kw): 18.5 or 25Hp Diesel engine
Weight 5000kg.
Residue oil of cake < 8%
The machine is with hight output oil rate, energy-saving, lower noise, etc. It's the product-spreading of the Agriculture Dept. And China patent product.
2.Cold pressing machine ZX18L
We adjust it for cold pressing machine ,especially for cold pressing rapeseeds bio-fuel.
It's without the steaming vessel on it .
The main data
Dimensions(mm): 2900 x 1850 x 2630
Productivity: 6-50t/24h for oilseeds
Power(Kw): 37.7kw or 55Hp Diesel engine
Weight 3500kg.
Residue oil of cake < 8-12%
The main data for ZX-20
Dimensions(mm): 2900 x 1800 x 3200
Productivity: 15-20t/24h for oilseeds
Power(Kw): 45kw or Diesel engine
Weight 5000kg.
Residue oil of cake < 6-7%
The main data for ZX-40
Dimensions(mm): 2900 x 1800 x 3600
Productivity: 40-50t/24h for oilseeds
Power(Kw): 30kw or Diesel engine
Weight 5500kg.
Residue oil of cake < 11-13%
The main data for ZX-60
Dimensions(mm): 2900 x 1800 x 3600
Productivity: 50-60t/24h for oilseeds
Power(Kw): 37kw or Diesel engine
Weight 5500kg.
Residue oil of cake < 12-14%
Bio-Diesel Oil Mill
All machinery could be suitable for extract oil from rapeseeds for bio-fuel diesel oil, after filting, final oil is used to tractor, diesel engine, truck, etc.
Transesterification
The oil filtered is triglycerides, containing glycerine. The biodiesel process turns the oils into esters, separating out the glycerine. The glycerine sinks to the bottom and the biodiesel floats on top and can it could be got for the biodiesel oil.
The process is called transesterification, which substitutes alcohol for the glycerine in a chemical reaction, using lye as a catalyst.
We supply for the bio-fuel oil mill as 50L-50, 000 L /day, especially for small type, family bio-fuel oil mill.
The Bio-diesel oil mill is including to the following:
BIO-68's one small oil mill, which could extract vegetable oil from more oilseeds, such as soybean, rapeseeds, peanut, coconut, sesame, etc.
And now it is used for biodiesel oil machine in Europe and North America.
it has multiple functions, including to:
Electrical motor directly contact to the shaft of oil press, it is more safety and stronger structure. The motor could be single phase, or 3 phases.
The data
Capacit: 30-50kg/h for seeds;
Power: 3-4kw single or 3 phases;
Weight: 280kg;
Size: 124*50*95cm;
Residue oil of cake: < 7%
Bio-105's specially oil press for pressing soybean, cottonseeds, etc lower oil rate seeds. One important, the soybean doesn't require to roaste, the machine could extract out all oil once from it, so its using cost is lower.
It is assembled the electrical heater for heating the pressing chamber automatically, to inactivate the output cake.
Certainly it also could extract vegetable oil from more oilseeds, such as rapeseeds, peanut, coconut, sesame, etc.
And now it is used for biodiesel oil machine in Europe and North America.
Main data
Name: Bio-105
Capacity: 200-300kg/h for oilseeds
Power: 11kw
Weight: 880 kg
Size (cm): 175*58*159
We have enough experience and advanced machinery for making canola/sunflower oil, which lead the technicity in this field.
The rude oil from oil press process, which is named cold pressing process.
The capacity is from 5t to 500t per day.
In the first way, oil pressing plant is composed of seeds cleaning & crushing unit, pressing unit, conveyor, electrical cabinet box, etc. The oil pressing unit as the main stage, to make the vegetable seeds flake in a hardened cage to squeeze oil content out.
It's complete set of oil pressing equipment, which is automatically operated to save more labor and cost.
Including to the following machinery and parts:
Electrical apparatus control, materials feeder, conveyer, screening machine, huller machine, medium boilor etc.
The by-products from the oil press are cake. The cake could be used as animal food with our pelleting machinery, or source material for the other biofule.
The machinery are assambled on steel structure, easyly operate under one digital controller system.
Note: We have the different oil mill factory for the visit.
It's one small oil mill, which could extract vegetable oil from more oilseeds, such as soybean, rapeseeds, peanut, coconut, sesame, etc.
The characteristic for 6YL- A Series is these.
It has multiple functions, including to screw oil press, electrical element for heating chamber, vacuum filter for clearing oil.
Before pressing, some parts of the press such as the press chamber, press screw and press ring will be pre-heated. During pressing, the press can filte the oil in due time. Only one machine the user could get the better edible oil. Also is with the simple operation and maintance!
6YL-120A oil press
Capacity 250-350kg/H; 6-8t/D for oilseeds; Power 11kw+1. 1kw; Weight 780kg; Size 2290*1100*1950mm.
Note: The other data
Cake contain oil
1533 Mining Machinery Equipments Spare Parts Suppliers
Short on time? Let Mining Machinery Equipments Spare Parts sellers contact you.
