Features: 1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc. 2.Prime-less adhesion to most building materials. 3.Remains flexible over a temperature range of 4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes. 5.Good compatibility with other neutral silicone sealants. 6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture. Main applications: 1.Sealing in joints. 2.Glazing for door and window. 3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc. 4.Many other uses. Limitations: 1.Can not be used in structural glazing applications. 2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface. 3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure. 4.Not for frost or wet surface. 5.Is not suitable for the place of continuous immersion or year-round moisture. 6.Surface temperature is not below 0¡æ or above 50 ¡æ. 7.Can not contact with strong acids or bases. 8.Cannot be used on joint which bearing structural strength or places of physical damage. 9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories. Typical properties: These values are not intended for use in preparing specifications. MethodTest ItemUnitStandard Result GB/T 13477Density g/cm3Specified value 0.1 1.3 GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0 GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380 GB/T 13477(ASTM D 2377) Tack free time h0.9 GB/T 13477 (ISO 7389) Extension recovery8088 GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5 GB: Chinese National Standard ASTM: American Society for Testing and Materials ISO: International Standardization Organization The GB¡± testing method is equivalent or partly equivalent to that in the Installation: 1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion. 2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required). 3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again. 4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated. Emergent Treatment: Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately. Shelf Life: 9 months from the manufacture date stored in cool & dry place below 27 ¡æ. Color: Clear, black, white, gray, other colours as clients¡¯ requirement. Packing: Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box. LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use. FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages. Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box.
Fesi 75
Silicon metal, ferroalloy, ferrosilicon, ferromanganese, silicon carbon alloy.
Sulphur, bitumen, mill scale.
Silicone caulk tool kit, silicone caulk away, silicone caulk remover, silicone caulk finisher, silicone caulk scraper.OEM, ODM
Calcium silicon ferroalloy, calcium silicon cored wire.
Purity - 99.95% + Particle size - 2 to 7 mm Granular Sulphur and Lump Sulphur available. Payment term - LC For price and other details please contact us
Ferrosilicon is used as a source of silicon to reduce metals from their oxides and to deoxidize steel and other ferrous alloys. Ferrosilicon is also used for manufacture of silicon, corrosion-resistant and high-temperature-resistant ferrous silicon alloys, and silicon steel for electromotors and transformer cores Origin - India and China Payment Term - LC For price, specification and other details please contact us
Used in casting steel and Iron. Origin - India and China Payment Term - LC . For price, specification and other details please contact us.
Silicon carbide elements are used today in the melting of glass and non-ferrous metal, heat treatment of metals, float glass production, production of ceramics and electronics components, igniters in pilot lights for gas heaters, etc. Origin - India and China For price, specification and other details please contact us.
Origin - India and China For price, specification and other details please contact us.
Origin - India and China For price, specification and other details please contact us.
A Christmas tree, or "tree", is an assembly of valves, spools, and fittings used to regulate the flow of pipes in an oil well, gas well, water injection well, water disposal well, gas injection well, condensate well and other types of wells. For price, specifications and other details please contact us
A device fitted with a hinged collar and bowsprings to keep the casing or liner in the center of the wellbore to help ensure efficient placement of a cement sheath around the casing string. It is being lowered into the hole after drilling has reached total depth and the drill string withdrawn. This allows the casing string to be cemented to the borehole without any 'thin' cement areas. For price, specification and other details please contact us.
Micaceous Iron Oxide Powder is used for the manufacturing of cutting electrodes and has many distinct features like reflecting UV light, resistance of chemicals, long shelf life. For price and specification please contact us.
Sulfur products are sulfur based products like carbon disulfide (CS2), sodium hydrosulfide (NaSH), sulfur chlorides (SCl2), sulfuric acid (H2SO4) and thiocyanate (RSCN) which are used in a wide range of applications such as textile, photo, rubber, mining, agriculture, pulp and paper, construction and cosmetic industry.. For price, specifications and other details please contact us
We are supplying a highly purified range of Industrial Grade Sulphur Powder, which is used for various industrial applications such as Pharmaceutical, Agricultural, Rubber Industries, Pyrotechnic Industries and Matchsticks Manufacturing Industries.
Green Silicon Carbide� is widely used for Abrasive Tools and Sandblasting. Our Silicon Carbide is hard with good abrasive ability and is ideal for abrasive blasting and polishing. It is widely used in abrasive tools, grinding and polishing etc. It also has above 99% Al2O3 content, coarse particles, good self-sharpening and good abrasion resistance.
Black Silicon Carbide  is widely used as a blasting medium and abrasive. Our Silicon Carbide is hard, extremely resistant and able to withstand the strongest alkalis and acids. It is widely used in abrasive tools, grinding and polishing, refractory materials, high end ceramics etc. It also has above 99% Al2O3 content, coarse particles, good self-sharpening and good abrasion resistance.
2000 MT granular Sulphur in a Jumbo bag and or bulk is available, please get in touch with us if a serious buyer.
