* Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name : Galvanized Steel Round Bar Diameter : 16-250mm or Customized Length : Customized Advantages : Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: half of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard : AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment : Galvanized Mechanical Property : Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing : Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc.
Product introduction * Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator. Product : Flat bar Standard : ASTM,BS,GB,JIS,etc Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc Technique : Hot Rolled Thickness : 2.0mm-24mm Size : 20mm-200mm Usage : Widely used in various building structure and engineering structure Delivery Time : 10~20days Shipping : 1)Shipping by containers 2)Shipping by bulk ship Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping : Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow
* H-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the H-shaped. H-section steel is divided into hot rolIed I-beam and lightweight H-beam * II-H-beam is mainly divided into ordinary H-beam, light I-beam, low alloy light I-beam . * The wing of ordinary H-beam and light H-beam gradually thinner from the root to the side, with a certain Angle. The type of ordinary H-beam and light H-beam is expressed by the Arabic number of its waist height in centimeters. . H-beam is mainly used in building structure, curtain wall engineering, mechanical equipment ,vehicle manufacturing and so on Standard DIN GB JIS BA AISI ASTM EN GOST etc. Shape : H -Beam Materials : Carbon steel Size : As customer request Packing : By bundles with steel strips or as customer request Application : Mechanical & manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.
Application Rebar Payment Terms 30%TT Advance + 70% Balance Type For construction Delivery Term CFR CIF FOB ETC. MOQ 1 Ton Quality High Quality Delivery time 7-15 Days Sample Avaliable Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement. Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi 5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi
6061 T4 round aluminum bar is are magnesium and silicon which has moderate strength good corrosion resistance weldability and good oxidation effect In particular there is no stress corrosion cracking tendency its excellent weldability corrosion resistance and cold workability are good and it is a wide range of use A very promising alloy Can be anodized coloring can also be painted on enamel suitable for building decoration materials It contains a small amount of Cu so the strength is higher than 6063 but the quenching sensitivity is also higher than 6063 after extrusion can not achieve wind quenching need to resolution treatment and quenching aging in order to obtain higher strength 6061 aluminum alloy contains 0408 silicon 07 iron 01504 copper 015 manganese 0812 magnesium 004035 chromium 025 zinc 015 titanium and a residual amount of aluminum The tensile strength of 6061 aluminum alloy is 180Mpa yield strength is 110Mpa elongation is 14 widely used in the manufacture of trucks building ships trams furniture mechanical parts precision machining industrial materials and other fields Data presentation Product name Aluminium bar Alloy 10501060107011002A062A123003300431054A01 5A0650525056508357545A0660616063620170057075 Temper H111H112H12H16H18H24H32H14T3T4T5T6T8 Diameter 10mm400mm Length 1000mm12000mm or customized Type OEMODM Processing Service Cutting surface treatment rough bending hardening surface painting forming etc Standard ASTMAISIJISGB DINEN Certificates ISO SGSBV MOQ 1 TON Delivery time Future Goods 1020 days Ready stock 510days Packaging Seaworthy Wooden pallet Wooden caseAluminum case Application Transportation construction machinery and equipment decoration industrialization etc Payment Terms TT LC etc Warehouse storage In order to meet the needs of customers small batch multispecification to spot the minimum order quantity of a single specification is 1 ton we have been committed to 18 series aluminum sheet aluminum sheet aluminum coil aluminum foil aluminum tube and other aluminum products R D production and sales Annual inventory of more than 3000 tons complete brand specifications truly meet customers onestop procurement
Name : Aluminium Roofing Sheet Standard JIS G3141,DIN1623,EN10130 Material 1050,1060,3003, 3A21,5052.5005.5083.5A05,6061 Sheet 0.15 mm- 2.0mm Normal sheet 2.0mm-6.0mm Medium plate 6.0 mmt-25.0mm Plate 25mm-200mm Super thick plate Customizable according to customer needs Packing Export standard packing or according to customers requirement Certificate ISO9001:2008,SGS Shipment Within10-15 workdays,25-30days when the quantity beyond 1000tons Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
2A16 LY16 Aluminum rod is a kind of non-ferrous metal rod, refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data. May have one or more closed through holes, wall thickness, uniform cross section, in line shape or roll shape delivery. Parameter Product Name 2A16 LY16 Aluminum rod Price range $350-$900 Preferential prices are available for large orders Minimum order quantity 1 ton Specifications The thickness is 2mm-200mm, the width is 5mm-150, and the length is 3m-12m or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade 1050 1060 1100 2A16LY16 2A02 LY6 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. Product certification ISO,SGS,BV,TUV, Delivery Condition Forged +Rough Machined (Black Surface) Application scenario Application scenario,Residential Construction,Mining Infrastructure Processing Service Welding, Drilling, Cutting, Bending Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Southeast Asia: Thailand, Malaysia, Brunei Europe: Finland, Sweden, Ireland, Netherlands Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum H-shaped steel Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
Aluminum Square Tube is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum Square Tube Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
8011 O aluminum foil is added with AlFeSi element more than 1 of the total alloying elements its alloy properties have a higher advantage clean surface uniform color no speckle flat without pinholes with excellent moisture resistance shading and extremely high barrier ability strong mechanical properties high blasting resistance puncture resistance and tear resistance Nontoxic tasteless safe and sanitary its chemical composition is mainly 0509 silicon 0610 iron 01 copper 02 manganese 005 magnesium 005 chromium 01 zinc 008 titanium its tensile strength is 125165Mpa yield strength is 110Mpa elongation is 25 Mainly used in food packaging pharmaceutical packaging Machining range thickness 002mm007mm width 300mm1100mm can be customized according to customer needs Aluminum foil after composite printing and gluing is widely used as a packaging material Thickness 000602mm Length According to customers requirement Width 203000mm Standard ASTMAISIJISGB DINEN Certification ISO SGSBV Surface finish Coating printing embossing gluing composite materials etc Grade 1000 Series 1050 1060 1070 1100 1200 1235 etc 3000 Series 3003 3004 3005 3104 3105 3A21 etc 5000 Series 5005 5052 5083 5086 5154 5182 5251 5754 etc 6000 Series 6061 6063 6082 6A02 etc 7000 Series 7050 7475 7075 etc 8000Series80118079 etc Temper H12H14H16H18H20H22H24H26H28H32H36H38HOH111H112H114H116H118H321 Payment Terms TT LC etc Loading port any port in China Packing standard export packing Container size 20ft GP5898mmLengthx2352mmWidthx2393mmHigh 40ft GP12032mmLengthx2352mmWidthx2393mmHigh 40ft HC12032mmLengthx2352mmWidthx2701mmHigh
1060 Aluminum rod is a kind of nonferrous metal rod refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data May have one or more closed through holes wall thickness uniform cross section in line shape or roll shape delivery Parameter Product Name 1060 Aluminum rod Price range 350900 Preferential prices are available for large orders Minimum order quantity 1 ton Specifications The thickness is 2mm200mm the width is 5mm150 and the length is 3m12m or according to requirements Standard ASTM JIS DIN GB Steel Grade 1050106011002A16LY162A02LY6 Test Chemical Component Analysis Mechanical Properties Technical Properties Exterior Size Inspection Xray Test Product certification ISOSGSBVTUV Delivery Condition Forged Rough Machined Black Surface Application scenario Application scenarioResidential ConstructionMining Infrastructure Processing Service Welding Drilling Cutting Bending Packing Wooden pallet or according to customers request Lead time 7 to 15 working days Payment terms TT LC Exporting country Southeast Asia Thailand Malaysia Brunei Europe Finland Sweden Ireland Netherlands Warehouse Storage Shandong Jintuo Metal Materials Co Ltd is located in Liaocheng City the capital of steel tubes It is a large enterprise specializing in the sales of carbon steel stainless steel galvanized color coated products and copper and aluminumOur company adopts a flexible business approach and management mechanism to provide good services to customers while also considering the interests of the owner and the project in order to ensure the quality of the project
Classification : Hastelloy Alloy Hastelloy Alloy Pipe is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Pipe is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Alloy Sheet is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Sheet is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Incoloy Alloy Incoloy Sheet is a nickel-iron-chromium alloy with molybdenum and copper added.Incoloy Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Sheet is Especially resistant to sulfuric and phosphoric acids.
