Molybdenum spraying wire: Molybdenum spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes. Furthermore, molybdenum spray wire is applied as an intermediate layer. Dia. 0.03mm-2.0mm Fine Molybdenum wire: The molybdenum wire is principally used in the high-temperature field of molybdenum furnace and radio tube outlets, also in thinning the molybdenum filament, and the molybdenum rod in heating materials for high-temperature furnace, and side-bracket/bracket/outlets wire for heating materials. 2000 meters/spool or coil.
Pure nickel wire properties: Material: Pure Nickel, Purity:99.5%~99.9% 1: Nickel wire has Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. 2: Nickel wire has Outstanding resistance to caustic alkalis up to and including the molten state. 3: Nickel wire is Virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum. 4: In acid, alkaline and neutral salt solutions, Nickel wire shows good resistance, but in oxidising salt solutions severe attack will occur. Wire diameter: 0.05mm-2.5mm, 10 gauge to 24 gauge, 0.101897 inch to 0.020101 inch. Fine Nickel Wire: We are specialized in manufacture of Fine Nickel Wires. They are made with high standard and qulity controll system. Purity:99.5%~99.9%. Fine Nickel wire diameter range from 0.04mm to 0.10mm, with high precision anf high purity. Thin Nickel Wire Manufacture: The thin nickel wire are made by advanced vacuum melting process. And by forging, rolling, annealing and drawing. To manufacture this very thin nickel wire, very strict quality controll system and the best material are used. Every step shall be done carefully during manufacture, especially the annealling process. 3 to 5 kgs/spool or coil.
Product name: nickel-chromium heating wire, strip. Product model:Cr20Ni80/ Cr30Ni70/ Cr15Ni60/ GH1140/Cr20Ni35/Cr20Ni30 Specifications: wire: 0.05 --- 10 mm Strip: (0.05 - 0.1) (5 - 250) mm Bar: 12 --- 30 mm Flat Yarn: 0.025 (0.4 - 4) mm. Introduction: Nickel-chromium alloy material is austenitic alloy, high temperature strength than the high-iron-chromium alloy material with high and stable resistance, corrosion resistance, good oxidation resistance of the surface, no distortion at high temperature, good viscosity, elongation than the iron-chromium alloy is 50%, processing prone to breaking, long after the plastic is better, do not become brittle after cooling, ease of repair after damage, regeneration of the alloy is good, is an industrial furnace, metallurgy, machinery, electrical appliances, aircraft, automotive, military and other industries producing heating elements and resistance elements preferred material. 3 kgs /spool.
Monel 400 Alloy Wire: Monel 400 Alloy Wire is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength.Monel 400 Alloy Wire has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch Monel K-500 Alloy Wire: Monel K500 Alloy Wire is one kind of the nickel-copper alloy Alloy Wire. Monel K500 Alloy Wire combines the excellent corrosion resistance of Monel 400 Alloy Wire with the added advantage of greater strength and hardness. Alloy K-500 Alloy Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition, Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch. 3 to 5 kgs/spool, coil.
Scrap
HMS1&2
1. Cold Work Steel (A2/1.2363,01/1.2510,D2/1.2379,D3/1.2080,SKD11,S7) 2. Hot Work Steel (H11/1.2343,H13/1.2344,H21/1.2581,L6/1.2714) 3. Plastic Work Steel (P20/1.2311,718/1.2738,S136/1.4034,NAK80) 4. Carbon Structural Steel:1018,1045/S45C,1050/S50C,20Mn,40Mn. 5. Carbon Tool Steel:T7,T8,T10,T11 6. Alloy Tool Steel:4140/42CrMo4, 4340/40CrNiMoA,,51CrV4 38CrMoAl 7. High Speed Steel:M2,M35,M42,T1 8. Alloy Structural Steel:20Cr,40Cr, 4140/42CrMo4, 40CrNiMoA/4340,8620 9. Machinery Steel:20CrNiMo/8620,4130,4140/42CrMo4, 10. Stainless Steel:201,202,301,302,304,304L,316,316L,310S,430,490L 11. Seamless Pipe: 4140/42CrMo4 12. Mould & Die Steel: P20/1.2311, H13/1.2344, 01/1.2510, 718/1.2738, 1045/S45C, Flat bar:8-90mmX305-610mm Round bar:Dia 8mm-Dia1000mm. 20'or 40'Container
Molybdenum wire. Depend on product.
Metal scrap, rolling scrap, mixed scrap, vehicle scrap.
Galvanized :hot-dipped galvanized / electro galvanized. Hession.
Perforated metal mesh is used in a variety of applications and industries including air diffusers in the HVAC market, acoustical panels for noise control, as filter media or support in the water filtration industry, and as architectural elements in building construction. The uses of perforated metal are unlimited. If you have an application that required control of light, sound, air, water, or particles, perforated metal might be your solution. The materials of perforated metal metal mesh could be Carbon Steel,Mild Steel, galvanised steel, stainless steel type 304 and 316, and aluminium are all standard lines. Sheets and half sheets up to 5mm thick with holes sizes 0.4 to 20mm can be available,and cut to size or custom fabricated. Perforated metal mesh with series of Hole Pattern: holes, square hole, lozenge holes, round hole, hexagonal hole, the cross hole, triangle holes, long round hole, long waist hole, the plum flower hole, the scales of holes, pattern of holes, pentagram hole, irregular holes, up drum hole etc. Perforated metal panels can be finished with a variety of coatings to enhance its appearance or increase its longevity. Perforated metal is a highly sustainable material as it lasts generations without needing to be replaced. Perforated metal can be produced from recycled material and can also be completely recycled when its usefulness is over. Pallets: 1000*2000*1000mm.
Ms pipe Size 1 to 5 mitter 15x42. 100 mt.
Silico manganese 60-65% and 65-70%, si 14%to 16%, c 2.5-2.0%, p 0.30 -0.25%, s 0.03%, particle size 10-50mm(90% min). Bags containing 1 mt, shipped in containers upto 25 to 27 tons.
Used railes R 50 R65. 1.5 lot size.
Mandrel bar plays a crucial role in producing large diameter seamless pipes in modern industries. In production line, it have to bear strong and complicate stretch, compressing touching stress and high temperature cold-hot yield stress under high speed cycling. Under these circumstance, chemical components, mechanical propertied, no-metallic inclusion, grain size, microstructure, ultrasonic test, size precision, surface finish, all these factories of steel are required very strictly. Mandrel bar is made from H13(4Cr5MoSiV1), With annual output of 15 thousand tons, its quality and service life have reached to world level of that. Our company is capable of producing a series of mandrel, such as MPM, PQF, FQM, with the diameter of 80~350mm, the length of 2500-17500mm. Equipment advantage: steel making (EBT+LF(VD)+ESR)-forging(formed by hydraulic press machine + forged by rotary forging machine)-annealing-rough machining ¨Cmagnetic test-heat treatment-ultrasonic test-finish machining-chrome plating-thread phosphating.
Our products include various rare metals products in form of plate, bar, rod, wire, pipe, crucible, sputtering target, machining part, and heat elements, and corrosion-resistance parts as well.
G01wall thickness: 2.0¡À0.2mm 51 x 51 x 650 51 x 102 x 750 71 x 71 x 750 77 x 77 x 750 91 x 91 x 750 96 x 96 x 750 102 x 102 x 750 102 x 102 x 850 On pallet.
G07wall thickness: 2.0, 0.2mm 71 x 71 x 150 91 x 91 x 150 101 x 101 x 150 102 x 102 x 150 On pallet.
200/201-HMS-1&2 80/20 Bulk - boat load min.30, 000mt/ 900, 000mt.
HMS 1&2.
