* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A53
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.
Material : API5L
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : �±0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
* Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance
+ 0.1mm
* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
* Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Decoration field:
304 stainless steel can be used in decoration field. 304 stainless steel has been widely used in the decoration industry due to its high tensile strength, good internal wall finish and excellent wear resistance. Just like our common stainless steel stair guardrails, handrails, stainless steel anti-theft windows, stainless steel doors, stainless steel tables and chairs, they are all made of 304 stainless steel decorative tubes. In life, the bathroom is wet and the kitchen is full of lampblack, so 304 stainless steel can be used in these two places.
Industrial field:
304 stainless steel is used in the industrial field, mainly for industrial transmission pipelines and mechanical structural parts such as petroleum, chemical, medical, food, light industry, mechanical instruments, etc. Generally, the working pressure of water supply system in high-rise buildings is high, while the tensile strength of 304 stainless steel is strong, and the possibility of water leakage under external force is very small. It is an important material of water supply system in high-rise buildings
Product name
Color Coated 304 Stainless steel sheet
Grade
304
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Decoration field:
304 stainless steel can be used in decoration field. 304 stainless steel has been widely used in the decoration industry due to its high tensile strength, good internal wall finish and excellent wear resistance. Just like our common stainless steel stair guardrails, handrails, stainless steel anti-theft windows, stainless steel doors, stainless steel tables and chairs, they are all made of 304 stainless steel decorative tubes. In life, the bathroom is wet and the kitchen is full of lampblack, so 304 stainless steel can be used in these two places.
Industrial field:
304 stainless steel is used in the industrial field, mainly for industrial transmission pipelines and mechanical structural parts such as petroleum, chemical, medical, food, light industry, mechanical instruments, etc. Generally, the working pressure of water supply system in high-rise buildings is high, while the tensile strength of 304 stainless steel is strong, and the possibility of water leakage under external force is very small. It is an important material of water supply system in high-rise buildings
Product name
Color Coated 304 Stainless steel sheet
Grade
304
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Lead time : 7 to 15 working days after the receipt
Packing : Wooden pallet or according to customer's request
Application : Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping : Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Lead time : 7 to 15 working days after the receipt
Packing : Wooden pallet or according to customer's request
Applicati on : Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
We are dealing in rb1 coal , pet coke , manganese ore , copper ore , iron ore, clinker , steel coils / sheets and also into various organic and inorganic chemicals majorly for cosmetics , soap and detergent , water treatment segment..
Our stainless steel bright square bars are produced using cold drawing and polishing processes, resulting in enhanced mechanical properties, precise dimensional accuracy, and a flawless surface finish. These bars are centerless ground and free from surface defects, making them ideal for industries requiring perfection in every detail. With exceptional strength, durability, and uniformity, our square bright bars are perfect for construction, engineering, and precision applications. Available in various grades and sizes, they meet the highest industry standards, providing unmatched performance and reliability for your critical projects.
Size Range 6mm upto 60mm
Size Range (Inch) 5/16 to 2 1/4
All grades of Austenitic, Ferritic, Martensitic, Duplex & Super Duplex and High Alloys.
Our stainless steel bright hexagonal bars are precision colddrawn for strength durability and corrosion resistance Ideal for fasteners nuts valves and engineering applications they meet the highest industry standards ensuring reliable performance and longevity in demanding environments Available in various sizes and grades
Size Range 11mm upto 70mm
Size Range Inch 58 to 2
All grades of Austenitic Ferritic Martensitic Duplex Super Duplex and High Alloys
Our stainless-steel black round bars are hot-rolled and feature a great surface finish, making them ideal for forging, machining, and industrial applications. These bars offer excellent strength, durability, and corrosion resistance. Available in various grades and sizes, they are perfect for heavy-duty engineering and construction projects.
Size & Grades 5mm to 100mm
All grades of Austenitic, Ferritic, Martensitic, Duplex & Super Duplex and High Alloys
Our stainless-steel channels are hot rolled for superior strength and corrosion resistance. Ideal for structural support in construction and fabrication, they provide excellent durability and load-bearing capacity. Available in various sizes to meet your project needs.
Size Range â?? 69 x 28 x 5, 63 x 38 x 6, 75 x 40 x 5, 75 x 40 x 6 mm, 100 x 50 x 5 mm, 100 x 50 x 6 mm, 50.8 x 25.4 x 4.76 mm, 50.8x 25.4 x 6.35 mm
Size Range (Inch) â?? 69 x 28 x 5, 63 x 38 x 6, 75 x 40 x 5, 75 x 40 x 6 mm, 100 x 50 x 5 mm, 100 x 50 x 6 mm, 50.8 x 25.4 x 4.76 mm, 50.8x 25.4 x 6.35 mm
All grades of Austenitic, Ferritic, Martensitic, Duplex & Super Duplex and High Alloys
Our stainlesssteel flat bars are produced with a smooth surface finish and high tensile strength These versatile bars are available in various sizes and grades offering excellent durability and resistance to wear and corrosion
Size Range 20 x 5 mm upto 100 x 25 mm
Size Range Inch 34 x 316 to 4x 1
All grades of Austenitic Ferritic Martensitic Duplex Super Duplex and High Alloys
Our R50/R65 Used Rail is sourced from high-quality materials, perfect for recycling and repurposing in the steel industry. Ideal for export, it provides reliable material for manufacturing and infrastructure projects globally.
Our Aluminium UBC is sourced from high-quality used beverage cans, providing a reliable material for recycling. Perfect for global markets, it offers excellent value in the production of new aluminium products while promoting sustainability.
96391 Metal Products Suppliers
Short on time? Let Metal Products sellers contact you.
