heat resisting alloy series: GH2132; GH3030; GH 3128; GH4145; GH4169; GH 4080
Advantages of Aluminum Titanium Carbon (Al-Ti-C ) (AlTi5C0.20, AlTi3C0.15) 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy: 1. High fluidity allowing faster casting speeds 2. Better Homogeneity of the alloy and uniformity of the structure 3. Reduction of the crack tendency during solidification 4. Improvement of the surface quality 5. Enhancement of mechanical properties 6. Increase of the strength and toughness of aluminum alloy Chemical Composition AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy: 1.Improve the strength and toughness of aluminum alloy. 2.Eliminate columnar grains and feathery grains. 3. Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation. 4. Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility 5. Reduce surface defects of aluminum product by improving its ductility. 6. Improve calendering rate and productivity on the premise of ensuring the quality of products. 7. Increase the using time of the calendering molds and auxiliary equipments on the premise of ensuring the quality of products. 8.Make the surface of aluminum more beautiful by improving the surface treatment of aluminum products Chemical Composition AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi3B1: Ti:2.5-3.5 B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.2: Ti:4.5-5.5% B:0.15-0.25% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.6 Ti:4.5-5.5% B:0.55-0.65% Fe:0.3%Max Si:0.2%Max V:0.1%Max Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Advantages of Aluminum Titanium Carbon(Al-Ti-C ) - AlTi5C0.20 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Calcium silicon Silicon barium Calcium silicon barium Calcium silicon aluminum Ferro silicon aluminum Calcium silicon aluminum barium These products are compound deoxidizer and desulfurizer, which can better meet the deoxidation and desulfurization operations of molten steel. It has low melting point, good deoxidation effect, promotes desulfurization, removes impurities, purifies molten steel, and improves steel properties.
Ferrosilicon/Ferrosilicon Powder/Ferrosilicon Slag FeSi Ferrochrome FeCr Ferro Manganese FeMn Ferrosilicon manganase FeSi Mn
Hard Alloys can replace tablets completely ,user can enjoy lower costs ,less wastage,and higher aluminium product quality.
Galinstan/Gallium indium tin alloy is a new liquid metal, which is nontoxic, pollution-free and with low melting point. It's also called liquid materials Appearance: Silver white, Liquid at room temperatureMelting point: 6-12�ºC� Usage: thermometer filling, replacement for M ercury, coolant, chip,ect. Contact: whatsapp 86-18784084148 Email: hey.irvingc@gmail.com
The Indonesian government has asked the mining industry to downstream the mineral and mining industry. President Jokowi recently stated that in the future Indonesia will no longer export raw materials. For this reason, companies are asked to immediately downstream products in the country to increase added value so that they can encourage domestic economic growth. The targets are adjusted to the assumption of economic and business development in 2022. In general, the Company development targets are adjusted to industrial development. The Company has developed the following strategies :Increasing production and sales of Bangka Tin Alloy. With the help of an Independent Surveyor, the source of this raw material is verified, then validated by the issuance of a Certificate of Origin (SKA). We also conducted a Conflict Free Sourching Initiative (CFSI) Audit to ensure clarity on the source of the Company's raw materials initiated by the World Electronic Industry Coalition (EICC) and transacts through the Tin Exchange in Indonesia, namely the Indonesian Commodity and Derivative Exchange (ICDX) and the Jakarta Future Exchange (JFX). Every seller and buyer must first be registered as a member on the exchange. The mediations involved are protected under the IMFPA - NCNDA deed.
Exotic Metal Alloys is one of the Nickel Alloy 200 Round Bars are made by utilizing the prominent nature of nickel amalgam that is sourced from extraordinary 'ol structured show shippers. In any case, the improvement being picked up is imagining a key ground in plan out the stunning thought of the thing. The thing is passed on Nickel Alloy 200 Round Bars are made by using mind blowing nature of nickel amalgam that is sourced from ensured show vendors. In any case, the improvement being made is driving forward through a mammoth headway in plan out the dazzling thought of the thing. The thing is passed on by using groupings of present day mechanical social gatherings and contraption paying little character to foul material quality measures to make possibly what an application has the choice to have. In like manner, standard stage devastating graph is done that considers quality control and probability being made parts. Keeping structures and spending plan, the industry is driving the thing in various examinations, subtleties and at reasonable rates.
Hastelloy C276 is a superalloy that wires molybdenum and nickel and has some element of tungsten that gives amazing detaching control and quality in the wide component of extraordinary temperature and condition. On the off chance that you are finding the correct maker who offers Hastelloy C276 bars, by then we would suggest you purchase these bars They are one of the unmistakable makers who give the best and stunning nature of bars in various structures and shapes as appeared by the interest and need of clients. They utilize unimaginable quality grungy material and current advancement to give positive length, size, and plan to these bars. Their destroying get-together of bosses conducts different tests to make these bars of high bore.
Exotic Metal Alloys Monel K-500 Bars, These bars are the amazing idea of restricting use and scratched spot. It denies any wear in tear around its surface. Round bars are treated with various cementing process so that these are indestructible in any condition. Its unmatched insane quality makes it perfect for liberal managing application. Bars counter any weight and setting parts. With no affirming and beating these bars stays against fluctuating loads. Monel bars are completely made game plans for working in high-temperature condition for discrediting any bowing. We gives confinement in bars some of them are H8, H9, H10, H11, H12, H13K9, K10, K11, and K12. Estimations are length 1 to 6 meters, broadness ranges from 0.1 to 100 mm. hex, square, round, square shape, billet are a few conditions of these bars.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
