ron Nickel alloy ASTM F30 alloy 46 ;( Composition (Nominal) Ni 46 ; Fe Balance: ( Alloy 46 is a nickel-iron controlled expansion alloy containing 46% nickel. It has a fairly constant coefficient of thermal expansion from room temperature up to 500 °C. ; : (SPECIFICATION: ASTM F30
Glass Sealing 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Alloy 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Nilo 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Nilo 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
INVAR 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( INVAR 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Nickel Iron Alloy 48 UNS K94800/ Nilo 48 ASTM F30 ; ( Composition (Nominal): Ni48 ; Fe Balance ; )Alloy 48 (Nilo 48) is a low expansion Nickel-Iron alloy. The coefficient of thermal expansion of this metal is designed to suit the CTE of soft lead and soda lime glasses. High Inflection point. Its service temperature goes as high as up to 450oC or 840oF. : (Product availability and request a QUOTE!
SOFT MAGNETIC IRON COBALT ALLOY Hiperco 50A ; (Composition (Nominal): Fe49, V2 , Co 49, :)Hiperco 50A Alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. :) Specifications: ASTM A801 Alloy Type 1 ;( Product availability and request a QUOTE!
NICKEL IRON SEALING ALLOY 52 ; (Composition (Nominal): Ni 50 , Fe Balance . ;( Alloy 52 is a 50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy's rate of thermal expansion is virtually constant to a temperature of about 1050 °F (565 °C). ;(Specification : ASTM F30 ; ;(Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 INVAR 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 PERNIFER 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
Iron-Nickel-Chromium alloy NI SPAN C902 UNS N09902 .,;( Composition (Nominal): Ni 43 ., Cr 6., Ti 3. Fe Balance ., :( Ni-Span C902 nickel iron chromium alloy is precipitation hardenable. It can attain controlled thermoelastic coefficient and static elastic modulus at temperatures from -50° F to 150° F. The main constituents of alloy are iron, nickel and chromium with nominal traces of titanium and aluminum. These elements produce a reddish-brown oxide layer upon exposure to natural conditions since it does not have the same qualities as stainless steel. Additionally, nickel iron chromium alloys feature nominal expansion after hot and cold processing. (Product availability and request a QUOTE!
Ferrosilicon alloy is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power. The production of silicon-aluminum ferroalloy can be divided into the following three stages 1. Generation of silicon carbide At lower temperatures, SiO2 reacts with carbon to produce silicon carbide, 2. Generation of aluminum oxide carbides and carbides In the temperature range of 1600~2000�ºC, carbon reacts with aluminum oxide to form aluminum oxide and silicon carbide; 3. Intermediate compounds such as carbides decompose silicon-aluminum-iron to form. At a higher temperature, aluminum oxide, silicon carbide, aluminum carbide and silicon dioxide react to obtain silicon-aluminum; only high-quality silicon-aluminum ferroalloy can produce high-quality silicon-aluminum iron blocks. When purchasing silicon-aluminum iron balls, you need to pay attention to Its quality, the quality of silicon aluminum iron ball has a direct impact on its application.
We are supplying ADC12 alloys and Al Remelted with Al 98% min on monthly basis. Origins are from UAE and Qatar. Looking for more buyers from China, Japan, Korea and Indonesia. Feel free to send messages;
3105 aluminum alloy is a typical deep-drawn material. The aluminum content is up to 98%, which can belong to the category of pure aluminum alloy, which is slightly stronger than the 1 series alloy with aluminum content of about 99%. Similarly, 3105 aluminum alloy cannot be strengthened by heat treatment, but its corrosion resistance, formability and welding properties are also excellent. Therefore, 3105 aluminum alloy is commonly used in the manufacture of residential wall panels, mobile homes and rain gear, bottle caps, lamp headstocks, shutters, etc. In addition, it is also used for sheet metal work. However, 3105 aluminum alloy has medium machinability, so lubricating oil treatment is required in all machining operations. And most importantly, 3105 aluminum alloy temper also affects the machinability required for our different applications. For example, the (H) harder temper is better than the 3105 aluminum alloy in the (O) annealed temper. But no matter how tempered the 3105 aluminum alloy is, the forming characteristics of the 3105 aluminum in all conventional processes are very good.
In the form of Sheets, plates, strips, pipes & fittings from South Korea & China. Nickel Alloys, brass, bronze, Stainless steel are the other materials we offer.
The material is lead. Form: Ingot Prices for products are negotiable, linked to the quotes of the London Metal Exchange (LME). Prices are fixed on the day of the contract Product origin : Uzbekistan Key Specifications/Special Features : Different product grades with different performances can be available according to the chemical composition. Supply the most suitable grade according to customer requests. Grades: C3C GOST 3778-98, CCyA GOST 1292-2005. HS Code: 7801 91 000 0 Minimum Order Size and Packgaing details MOQ: 21 tonns Packaging: ingot in packing
Produced from aluminium scrap and waste. Form : Ingot Prices for products are negotiable, linked to the quotes of the London Metal Exchange (LME). Prices are fixed on the day of the contract Product origin : Uzbekistan Key Specifications/Special Features : Different product grades with different performances can be available according to the chemical composition. Supply the most suitable grade according to customer requests. Grades: AK7, AK5M2, AK12M2, AK9M2. GOST 1583-93 HS Code: 7601 20 800 2 Minimum Order Size and Packgaing details MOQ: 21 tonns Packaging: ingot in packing
Aluminum Alloy Connector of Lean Racks Aluminum Pipe Aluminum Pipe, Aluminum Tube, Aluminum Joint Product feature (1) REUSABLE,CONTRIBUTE TO ENVIRONMETAL PROTECTION Reuseability: Aluminnm has advantages compared with other metals , which can be reused. Aluminum is also a result of the joint, so when we do disposal, it is easy to recysle, and it is easier disassemble and assembly characteristics , so that the formation of ministries product recycling system can be true. (2)FRAME PART ARE MADE OF ALUMINUM JOINTS Light: Iron, because aluminum accounted for about it is 1/3, it is very light and the joint use excuses are all aluminum , After the assemble, it is also very lightweight, and it is the specialty, It can reduce the burden of workers, when it is used in the mobile distribution racks,and cart use. (3) ENRICH THE DIVERSE USES OF SPARE PARTS CAN REALIZED Versatility: This products can be used in severy ways, Various parts of the perfect combination which can make bench, distribution racks, carts, clean room,etc. have diverse function, so that the operator can effectively utilize space, and can be assembled up assembly of various parts, but also deal with urgent facelift. (4) ALUMINUM + ALUNIMINUM HANDLE CAN REMAIN BEATUIFUL Artistic:Since the molding surface of the aluminum coating trreatment, reducing the occurrence of oxidation, the plant to maintain a lean , not easy to form scratches on the surface, while maintaining good gloss, to achieve overall plant appearance. (5)REDUCE ASSEMBLE MAN-HOURS TO IMPROVE THE EFFICIENCY Easy Assembly: In the assembly of the table, delivery time frame, with a convenient, fast features, Connection part can be just a simple blot assembly, Disassembly , which loosen the bolt only when you can simply just to decompose.
Aluminium alloy grating specification: Type Plain / Smooth, Serrated /teeth, I bar, serrated-I bar Steel flat size 20X3,25X3,25X5,30X3,30X4,30X5,32X3,32X5�?�120X10mm,.etc. Bearing bar pitch 12.5,15,20,25,30,35,40,50;120mm Cross bar pitch 38,50,80,100mm material aluminum alloy Surface treatment Untreated, oxidation Grating Standard China: YB/T 4001.1-2007 USA: ANSI/NAAMM(MBG531-88) UK: BS 4592-1987 Australia: AS 1657-1985 Material standard China: GB 700-88 UK: BS 4360:1990 USA: ASTM A36/A36M-96 AUSTRALIA: AS 3679
Description : 1. Alloy 6N01-T5 Gavanized Steel Sheet. 2. Gate latch: As Cosco design 3. 17 trays in one pile with simple seaworthy package 4. Rear Ladder Racks (Optional) 5. Side Tray Steps (Optional) 6. Mesh Header (Optional) 7. Standard shipment. Features : 1. Durable high grade aluminium 2. Light weight but rigid and strong 3. Anti-Rattle features 4. Stylish and easy maintenance 5. Range of accessories 6. Difference size available 7. Custom designs are also available Specification : 1050mm x 1370mm x 285mm 1050mm x 1570mm x 285mm
Material : aluminum alloy(3003al) Interior : nonstick coating Exterior: heat resistant coating Rim thickness : 4.0mm Bottom : spiral with logo Handle: similar stainless steel handle Package : color box Moq: 1500pcs per each 7.87 forged fry pan: $5.68 9.45 forged fry pan: $6.76 7.09 forged sauce pan with lid: $8.19 7.87 forged sauce pan with lid: $8.86 9.45 forged deep fry pan with lid: $9.09 9.45 forged stockpot with lid: $9.5
