Heating function, remote controller.
Infusion set with flash bulbs. Blood administration with vent . 1 Pc. per Polythene Bag
Automatic calibration Audible and visible alarms Three working mode: rate/time/volume With ultrasonic sensor for drop-counting Lcd, night operable English or other language display Specifications Drop detector: outside caliper rotary detector. (patented technology) Control way: Drop counting and adjusting the delivery rate automatically Pump type: peristaltic finger Applicable iv sets: Compatible with iv sets of any standard (including lucifugal iv sets) Accuracy: ín25drop/min: ía2%, >25drop/min: ía3% (with the drop counting control mode) ía5% (with the rate control mode after the correct calibration) Delivery rate range: 1í½400drop/min(1drop/min step) 1.0ml/hí½1200ml/h (1.0ml/hí½99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step) Delivery time range: 1miní½1999min (1 min step) Volume limit range: 0í½9999ml (1 ml step) Total volume range: 1í½9999ml (1 ml step) Rapid injection: 600ml/h Bolus: bolus rate 10-1200ml/hr, bolus volume: max of 100ml Kvo rate: When the delivery rate ín10ml/h, kvo is 1ml/h. Otherwise kvo is 3ml/h. Alarms: Air-in-line, infusion complete when limited volume has been set, empty container, occlusion, door is open, waiting time over, no drop been detected, operational errors, low battery, other device failures. Power supply: Ac power supply: ac 100 to 240vía10%ú¼50/60hzú+ Internal li battery: 11.1v, 2000mah. 6 hours of continuous operation on a new fully charged battery with the rate of 20 drops/min. Power consumption: ín25va Safety level: classó±, type cf Operating conditions: ambient temperature: 5 to 40íµíírelative humidity: 20 to 90% Storage conditions: ambient temperature: -10 to 55íµíírelative humidity: 10 to 90% Accessories: ac power line, operational manual Dimensions: 130mm(l)íß 200mm(w) íß 230mm(h) Net weight: approximately. 2.0kg
Dispoable infusion set 1.For infusion bags and bottles 2.Only for gravity infusion 3. Roller-with adjusting ring 4.Sterile by e.O gas, non toxic and pyrogen-free 5.. This produc is suitable for clinical vein infusion use. We can make infusion with different parts as follow: Vented spike with air fliter or without fliter; drip champer with fluid fliter or without fluid fliter; Latex free ball; latex free y site; luer lock connector; butterfly connector; with needle or without needle. Pe packing; Dinmension according to customer request.
Regulates flow of infusion fluid. Minimises need for costly syringe pump. Designed to eliminate accidental tampering. Male/female luer lock compatibility with all std iv cannulae and fluid administration products. Built in y-site connector for additional fluid injection. Flow rate from 5ml/hr to 250ml/hr. The cyject brand represents high quality, as all products are manufactured under strict quality guidelines to conform to the highest of international standards. Our international sales office operates from south africa, and exports are coordinated professionally, to supply goods direct from our factories in china, turkey & india. Should you require samples, we would be pleased to send you samples of our products.
Strong airvent spike with bacteria barrier at inlet, flexible drip chamber, disc filter in drip chamber,kink resistant tubing, strong roller clamp, latex bulb or y-site. Luer slip or male rotator. Available in: adult - 20 drop, y-site. Peel pouch Adult - 20 drop, 2 x y-site, peel pouch Paedriatric - 60 drop, y-site The cyject brand represents high quality, as all products are manufactured under strict quality guidelines to conform to the highest of international standards. Our international sales office operates from south africa, and exports are coordinated professionally, to supply goods direct from our factories in china, turkey & india. Should you require samples, we would be pleased to send you samples of our products.
Features for FA3 Series: Can display and preset the speed rate and volume Can display the infused volume Speed rate unit: ml/h With Bolus rate(Purge rate) function Occlusion alarm pressure is selectable Automaticlly recognize the syringe type - 10ml,20ml,30ml,50/60ml Possess temporarily clear up alarm function and recover set time alarm function Whenever speed rate more than 0.1ml/h,after the preset volume alarms, it turns to KVO speed rate automaticly. Display the accumulative infused volume Clear up the accumulative infused volume Internal battery embedded.
Nutrition Pump XB-300 is routine use equipment for hospital emergent treatment, cure and nursing. It adopts the new technology of microcomputer with compact structure. It has multi-intelligent alarm functions, could use disposable syringe of many kinds of, strong functions and use convenient. It is especially suitable for exact micro infusion or quick infusion for long time. This product is use for push the syringe to control the liquid amount into patient body for medical institution. 1. Work Condition 1.1 Ambient temperature: +5c---- 40c 1.2 Relative humidity: 20%~90% 1.3 Power supply: AC220V 22V, 50Hz 1.4 Built-in batteries: 12V, 1.2h/A (Undervoltage value ≤ 10.5V) It can be used for 2 hours continuously after 24 hours full charged. 1.5 Atmospheric Pressure: 860hpa~1060hpa 1.6 Storage Temperature: -40c~+55c 2. Basic Parameters 2.1 Dimensions (mm): 320 (L)/145(W)/120(H) 2.2 Weight: Approximately 3 kg 2.3 Power Consumption: ≤19.8VA 2.4 Compatible Syringe Size: 10ml, 20ml, 30ml, 50ml Disposable 2.5 Infusion Flow Selection: 0.1~199.9ml/h, original value is 0.1ml/h 2.6 Infusion Range: 0.1~999.9ml, original value is 0.1ml 2.7 Occlusion Pressure: 40K~70K pa 2.8 Flow Rate Precision: 5%(0.1ml/h≤Flow Rate≤50ml/h) /3%(50ml/h≤Flow Rate≤199.9ml/h) 2.9 Alarm: Self-Test, Occlusion, Nearly Finish, Finish, Low battery, Standby, Move 2.10 Functions: Syringe's Type Test, Transfusion amount display, Flow rate display, Power display, Auto-Alarm, KVO function After power off, the electrical memory function keeps for five years (Only effective for setting content)
The infusion assembly is compoased by drip chamber, spike, air inlet filter, infusion filter.
Features 1.sterilized using eogas 2.non-toxic ,non-pyrogenic Specifications 1.types available: IV infusion sets,y-type infusion sets 2.components: 1ú¬Spike cover 2ú¬spike 3ú¬injection drip chamber 4ú¬pvc tube 5ú¬flow regulator 6ú¬luer(male conical fitting) 7ú¬flash bulb 8ú¬6:100 fitting 9ú¬needle hub 10; needle Needle:21G, 22G, 23G, and others. Inner packing: 1pc/poly bag, 25pcs/box, Outer packing: 600pcs/carton, Carton size: 59x46x37. 5cm
Features: 1)butterfly shaped wings for better handling and attachment to skin 2)slip or luer set end matches well with different types of infusion sets 3)siliconed cannula for smooth penetration 4)tube length: 15-30cm 5)gauge 18g - 26g available 6)eto sterilized 7)internationally accepted color-code 8)manufacturing using automated polishing and lubrication processes 9)strict quality control procedures ensure consistent performance. Packing: Sterile by eto: 1pc/1poly bag 100pcs/1 box, 2000pcs/carton Cartonsize: 56x25.5x37.5cm
Features: 1. Awarded with iso13485: (tuv germany) and ce certificate 2. High infusion rate :1~2000ml/h 3. Patented door-free design and double cpu, safer and more reliable, avoiding pump stuck and fluid leakage. 4. Accumulated infusion volume: 1~9999ml 5. Detecting air bubble and occlusion, audio and visual alarms signal given out Big lcd indicators 6. Special bolus function : 2000ml/h. Press bolus key, run at the highest rate; Release it, the pump enter into the original speed 7. Kvo: 1ml/h to avoid liquid flow back Stardard packing
Infusion pump Specifications Controls: Drop counting and adjusting the delivery rate automatically Pump type: peristaltic finger Applicable iv sets: Various iv sets(including lucifugal iv sets) Accuracy: 25drop/min:2%, >25drop/min:3% (used in the drop counting control way) 5% (used in the volumetric control way with the correct calibration) Delivery rate range: 1½400drop/min(1drop/min step) 1.0ml/h½1200ml/h (1.0ml/h½99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step) Delivery time range: 1min½1999min (1 min step) Volume limit range: 0½9999ml (1 ml step) Total volume range: 1½9999ml (1 ml step) Purge rate: 600ml/h Kvo rate: When the delivery rate 10ml/h, kvo is 1ml/h. Otherwise kvo is 3ml/h. Alarms: Air-in-line, infusion complete(a volume limit has been set), empty container, occlusion, door open, over time, no drop sensor, operation error, low battery and other device failures. Power source: Ac power supply: ac 100 to 240v10%ú¼50/60hzú+ Internal li battery: 11.5v, 2000mah. Battery life with continuous operation is approx. 8 hours (when using a new, full charged battery and running at 20drop/min with any standard of iv set). Power consumption: 25va Shock protection: classó, type bf Dimensions: 130mm 200mm 230mm
Infusion set
Transfusion set
ABS spike Drip chamber Flow regulator PVC tube Bulb injection site Luer slip/lock connector 21G Hypodermic needle
Sterile Infusion Set (1)
Infusion set with ABS spike, Drip chamber, Flow regulator PVC tube, Y-injection site, Luer lock connector
Place of Origin: China Brand Name: OEM Model Number: Infusion set with burette Disinfecting Type: EO Gas Size: 120-150cm(Customize) Stock: NO Shelf Life: 3-5 years Material: PVC Quality Certification: ce Instrument classification: Class II Safety standard: None Product name: Infusion set with burette Certificate: CE/ISO13485/F DA Needle: with or without Luer type: luer lock and luer slip Tube color: Transparent or elastic frosted (Customize) Color: Transparent or elastic frosted (Customize) MOQ: 100000pcs OEM: Accept OEM Sample: Sample Offered Lead Time: 45 Days after Payment
Place of Origin: China Brand Name: OEM Model Number: / Disinfecting Type: EO Properties: Injection & Puncture Instrument Size: 53*37*41 Stock: NO Shelf Life: 5years Material: PVC+ABS+PE+STAINLESS STEEL Quality Certification: TUV Instrument classification: Class III Safety standard: None Product name: INFUSION SET
