GOLD ROTO SPIN series oils are range of high quality spindle lubricants for use on modern textile machines. Manufactured from the highest quality base stocks and ashless additives, it reduces spindle wear, protects against rust and may be easily removed by washing textile contamination occurs.
HYDRAULIC OILS Turbine Oil General Purpose Oil Circulating Oils Compressor Oils Heat Transfer Fluids Soluble cutting Oil SCOPE Textron AW Hydraulic oils are premium quality anti-oxidant, anti-wear, anti-rust hydraulic oils for industrial hydraulic applications blended with selected high quality base stocks and special additives to give excellent dimulsibility, superior oxidation and thermal stability and excellent load carrying capacity. Main Benefits Excellent oxidation & thermal stability. Excellent load carrying capacity. Outstanding anti-wear performance. Superior filterability and good water separation. Low friction and hydraulic stability. Excellent air release and antifoam properties Application SCOPE Textron AW Hydraulic Oils can be used in all Hydraulic and fluid power transmission system suitable for a wide range of other industrial applications.
Scope Centex Marine Engine Oil 6 TBN & 9 TBN Scope Centex Marine Engine Oil 12 TBN & 15 TBN CENTEX Heavy Duty Marine Engine Oil SCOPE Centex Marine System oil is premium quality lubricant for cross head diesel engine crank case system. It is especially effective in highly rated cross head engines with oil cooled pistons, power take- off (PTO) gear applications. Main Benefits Good Alkinity Excellent resistance to corrosion. Excellent detergency keeps crankcase and under piston spaces clean. Good oxidation stability. Application SCOPE Centex Marine system oil of 6 TBN & 9 TBN can be used for crank case lubrication of high power low speed cross head marine diesel engines. It can be used in stationery diesel engines for power generation and reduction gear boxes.
We are looking for lubricants importers/.dealers and distributors across the nations... we work based on standard formulations from SOCIETY OF AUTOMOTIVE ENGINEERS AND AMERICAN PETROLEUM INSTIUTUE THAT SAE AND API.
Lubricants- Royale is our own brand ane which include engine oil, Hydraulic oil, grease etc., OEM as per request. Base oil- Grou[ I SN 150//SN500//SN650, Group II N500/N150, Group III 4CST/6CST/8CST. Bitumen- 40/50, 60/70,85/100 Sulfur- sulfur acid. LPG- Propane and butane Codensate- C5-C11 hydrocarbons and hydrocarbons greater than C* Crude Oil - Light API 30- 35, |Heavy crude oil- API 25 below, and API from 25-30 Intermediate crude oil
Hydraulic, HDDO, PCMO, PCDO, SEO, GO, Marine Lubricants, Grease, Fully Syn, Semi, Mineral, all kind variants of lubricants
Hydraulic, HDDO, PCMO, PCDO, SEO, GO, Marine Lubricants, Grease, Fully Syn, Semi, Mineral, all kind variants of lubricants
Product Description ; Base Oil Group I Price of product ( USD price or FOB price) ; USD 590 - USD 600 per MT Product origin ; Jakarta, Indonesia Key Specifications/Special Features : Appearance = Clear Density at 15 °C, Kg/L = 0.8678 Kinematic Viscosity at 40 °C, CSt = 23.91 Kinematic Viscosity at 100 °C, cSt= 4.56 Viscosity Index = 103 ASTM Colour = L 0.5 Flash Point PMcc,°C = 210 Pour Point, °C = -15 Total Sulfur Content, %wt = 0.875 Total Acid Number, mgKOH/g = 0.023 Minimum Order Size and Packgaing details : 20 MT per container
Product Description ; Base Oil Group I Price of product ( USD price or FOB price) ; USD 580 - USD 590 per MT Product origin ; Jakarta, Indonesia Key Specifications/Special Features : Appearance = Clear Density@15°C, kg/L = 0.8780 Viscosity Kinematic@ 40°C,cSt = 50.29 Viscosity Kinematic@100°C,cSt = 7.130 Viscosity Index = 99 Colour ASTM = L 1.0 Flash Point PMcc, °C = 218 Pour Point, °C = -9 Total Sulphur Content, %wt = 0.015 Total Acid Number, mgKOH/gram = 0.015 Minimum Order Size and Packgaing details : 20 MT per container
Product Description ; Base Oil Group I Price of product ( USD price or FOB price) ; USD 575 - USD580 per MT Product origin ; Jakarta, Indonesia Key Specifications/Special Features : Appearance = Clear Density at 15 °C, Kg/L = 0.8829 Kinematic Viscosity at 40 °C, cSt = 98.65 Kinematic Viscosity at 100 °C, cSt = 11.04 Viscosity Index = 96 ASTM Colour = 2.0 Flash Point PMcc, °C = 250 Pour Point, °C = -9 Total Sulfur Content, %wt = 0.02 Total Acid Number, mgKOH/g = 0.015 Minimum Order Size and Packgaing details : 20 MT per container
Product Description ; Base Oil Group I Price of product ( USD price or FOB price) ; USD 715 - USD 810 per MT Product origin ; Jakarta, Indonesia Key Specifications/Special Features : Appearance = Clear Density @ 15°C, kg/L = 0.8980 Viscosity Kinematic@40°C, cSt = 486.0 Viscosity Kinematic @ 100°C,cSt = 31.32 Viscosity Index = 95 Colour ASTM = L3.0 Flash Point PMcc, °C = 280 Flash Point COC, °C = 318 Pour Point, '°C = -9 Total Sulphur Content, %wt = 0.115 Total Acid Number, mgKOH/gram = 0.014 Minimum Order Size and Packgaing details : 20 MT per container
SIGNATURE 20W-40 is high performance conventional four-stroke motorcycle engine oils primarily intended for general use in all types of four-stroke motorcycles and engines. Features and Benefits Quality mineral oils and an advanced additive system to provide good engine cleanliness, good wear protection and corrosion protection. Motorcycle engine oils protect engine and gear and make clutch working. Packing :- 500ml , 900ml , 1ltr , 50ltr, 210ltr
We Are Manufacturer Of Engine Oil Lubricants 0W16, 0W20, 0W30, 5W20, 5W30 And Many More
Universal lubrication oil added funnel is suitable for 98% car models to added Oil.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Active content: 42 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric; Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow viscous liquid Ionicity: Cationic pH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 85 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantage This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options: The lubricator and riser section range is available with the following options : 3.00â??ID to 9.00â?? ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 �°C Choice of quick union or API flanged connections Choice of bleed port connections Technical Features: On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections.
