1.Stainless steel materials 2.With measuring scale For measuring the distance between two adjoining rails BENEFITS Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry. TECHNICAL DATA Measure range: 5-30mm
1.Portable 2.Easy to operate 3.Fast calibrate The portable track gauge calibrator is use to calibrate the 1435mm track gauge.It can calibrate the track gauge,check rail gauge and guard rail face gauge, and check the correctness of the superelevation zero position. Portable track gauge calibrator is very easy to operate,high accuray and fast calibration .
1. Durable 2. High Accuracy 3. Accept customized 1. Durable Adopt the high strength material, not easy to wear out. 2. High Accuracy: Reach 0.1mm. 3.Stable insulation performance The ruler body is equipped with insulating board, which is made of epoxy glass fiber board (FR4). It has high mechanical strength performance under the temperature of -40 â??-120â??. The size of the mechanical ruler is stable and never degenerates, and the electrical insulation performance is stable in high humidity environment. 4. Accept customized 5. Small coefficient of thermal expansionã?? stable ruler body ï¼? The ruler body is inlaid with steel ruler , and it will have higher precision, small thermal expansion coefficient, which can eliminate the effect of temperature on precision. 6.Multi-functions with wide usageï¼?could be used for measuring two kinds projects,suitable for different demands. ï¼?1ï¼?Measure the offset distance for the standard track gauge turnout ï¼?2ï¼?Could be used as track square ruler for measuring the right alignment of rail tracks 7.High hardness Measure Headsï¼? Made of Rockwell 52 steel,high hardness and not easy to rust
When operating the YJT-500 hydraulic pointed rail straightener, place the machine horizontally on the pointed rail or ordinary steel rail, align the top block of the hydraulic cylinder piston rod with the center of the rail waist at the deformed position of the pointed rail or ordinary steel rail, and hook the rail arm tightly to the center of the other side rail waist. Moving the hand pump rod, the piston rod extends, and the top block presses against the rail waist. At the same time, the hook rail pads on both sides also hook against the rail waist, and the hand pump rod is moved back and forth to supply oil to the hydraulic cylinder. The system pressure increases, and the thrust of the piston rod and top block increases. Under the support of the hook rail arms on both sides, the pointed rail or ordinary steel rail deforms until plastic deformation occurs, and the pointed rail or ordinary steel rail is straightened or bent.
The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be used to grind frog, switch points, switch cores, top and side flashes of guard rails, and can also grind the rail flashes of crossovers and standard rails. It can be tilted by 36�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions. So that the grinding device of the machine can work very accurately in the narrow space between the rails. According to customer needs, Honda GX160 or GX200 gasoline engine can be selected as power, and the installation dimensions of the two engines are the same.
1.Multifunctional 2.Portable use 3. Light weight to carry DGM-2.2 multifunctional rail switch grinding machine is suitable for eliminating or repairing rail damage in weak parts of turnout. It mainly repairs the fat edge, profile and reduced value of switch rail, movable center rail and wing rail with the section width below 50 mm, so as to slow down the development of rail surface defects, improve rail surface smoothness, and further improve wheel rail contact relationship and passenger riding comfort The purpose is to reduce the wheel rail noise, prolong the service life of rail and reduce the maintenance cost. Under the impact force of high-speed and heavy haul trains, the rail of switch and frog often appears some diseases, such as falling block, fatigue crack, fat edge, poor wheel rail relationship, etc. due to contact fatigue, which leads to the decrease of rail life, the increase of maintenance workload and maintenance cost, and even seriously affects the traffic safety. The purpose of the research and development of this project is: First, to improve the labor intensity, mainly for the repair of the switch rail surface damage, the machine has high efficiency, light weight, safe, convenient and reliable up and down the road; Second, to save manpower, reduce maintenance costs; Third, to focus on improving the grinding accuracy of switch rail, repair the switch point (Center) rail profile, solve the uneven stress relationship between wheel and rail, and extend the service life of switch rail service life.
1. Durable 2. High Accuracy 3. Accept customized 1. Durable Adopt the high strength material, not easy to wear out. 2. High Accuracy: Reach 0.1mm. 3.Stable insulation performance The ruler body is equipped with insulating board, which is made of epoxy glass fiber board (FR4). It has high mechanical strength performance under the temperature of -40 -120. The size of the mechanical ruler is stable and never degenerates, and the electrical insulation performance is stable in high humidity environment. 4. Accept customized 5. Small coefficient of thermal expansion stable ruler body The ruler body is inlaid with steel ruler , and it will have higher precision, small thermal expansion coefficient, which can eliminate the effect of temperature on precision. 6.Multi-functions with wide usage could be used for measuring two kinds projects, suitable for different demands. 1. Measure the offset distance for the standard track gauge turnout 2. Could be used as track square ruler for measuring the right alignment of rail tracks 7.High hardness Measure Heads Made of Rockwell 52 steel, high hardness and not easy to rust
Single-side Rail Chamfering Device Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works. Single-Side Rail Chamfering Device Single-Side Rail Chamfering Device Product Parameters Model LJ-DJQ-D Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) (mm) 180* 50*190mm Max chamfer diameter �¦ 31~�¦32 Max chamfer cutting torque Tmax = 10N â?¢ m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG
Railway Brake Shoes Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking. Specification Model LJ-TX Type Railway Brake Shoes Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm Weight 5.6kg
Railway Singal Light It can be widely used in railroad , shipping and other trafficand transportation industries and some special industriesas signal indication , safety warning and working lighting. Specification Model MSL4730 Type Railway Signal Light Material Plastic Dimensions (L x W x H) (mm) 66*170mm Rated Voltage DC3.7V Rated capacity 3.8Ah/3800mAh Lift circle â?¥100000h Battery burn time-singal â?¥ 12h Battery burn time-lighting â?¥10h Bttery life circle â?¥1000 Charging time â?¤10h Weight 0.25kg Shell protection grade IP65
Magnetic Rail Versine Measuring Kits Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model LJ-XXJ Type Versine Measuring Device Material Plastic Measuring Range 100m Dimension 140*210*145mm Weight 1.65kg
item value Type Fishplate Material 45# steel, 45Mn Dimensions (L x W x H) (mm) 790/820mm Place of Origin China Hubei Brand Name Linkage Type Fishplate Material 45# steel, 45Mn Dimensions (L x W x H) (mm) 790/820mm Place of Origin China (Mainland) Model Number P38/ P43/ P50/ P60 Name P50 fish plate Application P50 rail joint Standard YB(T)58-1987 Producing process Hot rolled
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1)Measure the switch angle steel whether is square when installed 2)Measure the internal lock switch parts whether is square when installed 3)Measure the switch rail whether creeping 4) Measure the sleeper whether square when installed. Product Parameters Model Size LJ-FC-I 1760mm LJ-FC-IA 2000mm Other customizable
Rail thermometer RT rail temperature table is not only dedicated to measure the temperature of the railway rails, but also can measure the air temperature and the surface temperature of other objects. division value 1 Measure range -40~+70
Roller manufactured in special steel and used for moving long-welded rails. The supporting structure is composed of a roller thatruns on two bearings and it is able to support the weight of the rail. Recommend Products Frequently bought together Railway saving back tool for measuring 1000mm 1067mm,1435mm,1520mm ,1600mm ,1676mm track gauge
Digital Rail Corrugation Gauge Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value. BENEFITS It's simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient;Easy to site construction, ensure the quality of work. Specification Model LJ-BM-A Type Rail Corrugation Gauge Material Stainless Steel Dimensions (L x W x H) (mm) 120*12*24 cm Horizontal measure range 1000mm Vertical measure range -8 - +25mm Accuracy �±0.05mm Resolution 0.01mm Repeat error 0.02mm Working temperature -5 - 40
Rail turner Rail turn bar Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded together, utility model turn rail device, turning rail rail with a manual clamp tool. Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a dedicated tool for standing. Details Images Rail Turn Bar Railroad Maintenance Tools Solutions rail turn bar Rail Turn Bar Railroad Maintenance Tools Solutions rail turner PRODUCT SPECIFICATIONS Type rail turner length 1500mm Applicable rail type 43/50/60 rail
Lightweight, increased cutting speed It is a new generation of intemal combustion rail cutting machine, the weight is greatly reduced and the cutting speed is improved.lt is suitable for railway laying, line maintenance, emergency repair, especially track cutting operations in sections and sections without power supply. lt can be applied to rails of variousspecifcations,especiallyfor 50kg/m-60 kg/'m rails.
Lightweight, increased cutting speed It is a new generation of intemal combustion rail cutting machine, the weight is greatly reduced and the cutting speed is improved.lt is suitable for railway laying, line maintenance, emergency repair, especially track cutting operations in sections and sections without power supply. lt can be applied to rails of variousspecifcations,especiallyfor 50kg/m-60 kg/'m rails.
Lightweight, increased cutting speed It is a new generation of intemal combustion rail cutting machine, the weight is greatly reduced and the cutting speed is improved.lt is suitable for railway laying, line maintenance, emergency repair, especially track cutting operations in sections and sections without power supply. lt can be applied to rails of variousspecifcations,especiallyfor 50kg/m-60 kg/'m rails.
