Find Verified Industrial Wires Cables Suppliers, Manufacturers and Wholesalers

Specification
Material : polyurethane coated wire rope
Aperture shape :square or rectangular
Aperture range : 2mm to big
Wire rope diameter range : 1.5mm to big

Description
Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens.

The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.
This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required.
The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top,
running in a cross-flow orientation, or positioned underneath the rope with the wire.

Features
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck.
Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths.
The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer
periods between changeover and less downtime during busy screening periods.

The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes,
similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion
protection along the hooks.

V - Wire Screens are fabricated in Pipe Form from Wires. All Welded Wedge Wires Screen is made from two elements - Outside V-shape
wire and Inside Longitudinal Rods.
The V-shaped Wire is spirally wrapped on a Cage made of Longitudinal Rods. The intersecting of shaped wire and rod is welded through each other by resistance welding. Due to resistance welding the weld joined is very strong.
V-Wire Screen Filter is a Highly Acceptable Modern Technology in Rain Water Harvesting. It eliminates conventional filtration system, SAVES -Precious Space, onstruction Cost and Construction Time for Filtration Tank. Scientific Design helps Cleaning Very Easy and SAVES Maintenance Cost.

Multi-layer sintered metal mesh filters combine the advantages of woven wire mesh, with micron-level pore sizes and a diffusion-bonded wire mesh laminated plate, to provide mechanical strength and stability. Typically, fine woven metal wire mesh filters are placed within multiple layers of sintered laminated plates to protect the fine mesh from mechanical damage caused by environmental pressure. 5-layer sintered laminated plates are commonly used for sintered wire mesh filters.
Parameters
Material: SUS334L SUS316L
layers: single layer, 2 to 3 layers, 5 layers and 6 layers or customized
Sheet size customized
Features
1.Uniform pore size

2.High temperature resistance and corrosion resistance

3.Cleanable and Reusable

4.Micron-level pore size

Different layers has different performance characteristics
Single layer sintered wire mesh is formed by diffusion bonding, resulting in a permanent geometric shape, pore size and filtration level. It is a cost-effective alternative to mesh filters and commonly found in disc, ring, and simple cylindrical shapes.

Two to three layers of sintered wire mesh have good mechanical strength and medium-sized pores, suitable for manufacturing pleated cylindrical filters, candle filters, and sintered discs. This type of sintered wire mesh has a filtering layer with the desired pore size sandwiched between outer and inner protection layers.

Five-layer sintered wire mesh consists of one layer of fine woven wire mesh sandwiched between two layers of coarser woven wire mesh protection layers. These three layers of woven wire mesh are then sintered together with two support layers to enhance the filtration performance. This type of sintered metal wire mesh laminated plate has a wide range of applications in chemical processing, food and beverage, pharmaceuticals, transportation, and is used for liquid and gas filtration, fluidized beds, and other applications.
Application
Oil and gas production
Chemical industry
Food
Aerospace
Polymer filtration
Energy and Nuclear Power