Horizontal screen scroll discharge centrifuges are a piece of advanced solid-liquid separation equipment with low energy consumption, high performance, good separation effect, continuous work, high production efficiency, and a high degree of automation. Horizontal screen scroll centrifuge Horizontal screen scroll centrifuges have been widely used in chemical, food, salt, mining, pharmaceutical, and other industries. However, due to its separation principle and structural characteristics, it is more targeted to materials. Material analysis and corresponding experiments should be carried out during the selection to determine its applicability and separation performance. It's is mainly suitable for material particles with larger particle size and no strict requirements for particle damage, such as fibers, plastic particles, and various crystals.
Tobee 12x10F-G Gravel Pump is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is world's standard for dredge, gravel or large particle slurries applications. Design Features: Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving. Large dredging sand depth, high density of dredging mud, good pump NPSH and strong suction lift ability. Strong through-put, The dredging pump can persistently discharge gravel, high plastic soil lump,etc. Wide application, The sand pump can be used in various kinds of soil quality. The TG sand pump can be directly matched with electric motor or diesel engine. The TG sand pump impeller is 3 or 5 vanes for large particles delivering. Little hydraulic loss, high efficiency and low oil-consumption. Steady operating, little vibration, low noise. Simple & reliable constriction, easily disassembly & assembly, convenient maintain. Reliable sealing without leakage. Long operating life of wear parts.
Tobee 18x16TU-G Gravel Pump is designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design. Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
Tobee Hydroman 400TJQ Electric Submersible Slurry Pump adopts excellent material, advanced structure, and it is with wide flowing passage of strong delivery ability. The wear parts are wear-resistant chrome alloy. They are mainly used for transporting liquid with solid particles, like sand, cider coal, mud etc. It is widely used in metallurgy, in, steel industry, building, power station and other industries. Design Features: Better stability & longer service life - wear parts are all constructed with abrasion resistant chromium alloy. Unique mechanical seal device can prevent the electric motor from high pressure water and impurities, thus high suction efficiency can be ensured. Agitation impeller is equipped to help break and mix the sludge. Easy installation, operation and cost saving, since no additional vacuum pump or pump house is needed. Professional technology support is provided during the whole process of the usage and maintenance.
Tobee Hydroman THY24 - THY85 Heavy Duty Hydraulic Slurry Pumps are designed for the pump that are driven by hydraulic motors, which are available by eliminating haul trucks, conveyor belts and other mechanical earth moving equipment. Hydraulic submersible slurry pumps are capable of dredging sand from the river and/or sea in high density and specific gravity by using the optional water jets and cutter heads. Dredging is an activity that dredge sand and gravel underwater in shallow seas or rivers, and so the project of dredging system will consist of dredging slurry pump, pipe, diesel motor or electric engine, and various accessories, in order to excavate and remove material from the bottom of water. Design Features: Wear parts are all constructed with abrasion resistant chromium alloy. Unique mechanical seal device can prevent the electric motor from high pressure water and impurity. Easy installation, operation and cost saving, No need additional vacuum pump. In addition to the main impeller, a pair of agitation impeller is equipped to help break and mix the sludge. Professional technology support is provided during the whole process of the usage and maintenance. handle up to 70% per weight material density.
Tobee Hydroman THY175-THY220 Hydraulic Dredge Pumps are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge, mud, sand and slurry. Remove the bucket and connect to the hydraulic dredge pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The Hydroman hydraulic dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can be supplied to various dredging conditions. Design Features: The hydraulic dredge pump bottom is arranged with the mixing device, and the bilateral and multilateral separate mixer can be arranged, which can prevent pump blockage by the bulky fixed substance, so as to fully mix the solid with liquid, and facilitate handling. The hydraulic dredge pump can handle the solid substance with the maximum particle size of 150mm, and the solid-liquid extraction concentration can be over 70%.
Tobee THY300-THY400 Hydraulic Sludge Pumps are a new dredging equipment. It is mainly used as an excavator attachment taking place of grab bucket when there is too much water, mud and not suitable for digging. It is driven by the excavator hydraulic system or a separate hydraulic station to pump sand, sludge, slurry, mortar etc. Its wear parts are made of high-strength and wear-resistant chrome alloy. Hydroman hydraulic sludge pump is mostly attached to amphibious excavator, swamp excavator, dredging excavators, or cutter suction dredger, bucket dredgers for dredging operation. Design Features: High performance in heavy duty conditions hydraulic sludge pumps ensure transportation up to 35% of dry mass (sand, gravel etc.) from total pump capacity. Oversized motors are designed for sludge and slurries with solid concentration up to 70% by weight and 1.6 Kg/dm3. The hydraulic drive version is also available to provide higher performance in especially harsh working conditions.
Tobee Hydroman TQSY Hydraulic Submersible Dredge Pumps are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions. Design Features: The bottom of the dredge pump has a mixing device, and it also could be equipped with bilateral or multilateral agitators additionally in order to prevent large pieces of fixed material clogging the dredge pump and fully making the solid and liquid mixed, thus it is more convenient to handle.
Tobee Hydroman THY Hydraulic Submersible Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The THY hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations. Design Features: Submersible heavy duty agitator pump, hydraulic driven with variable RPM All Pumps have standard high efficiency agitator to lift settled solids. High abrasion resistance with high chrome wear parts. Low rotation speed to reduce wear effect. Agitators, Cutters, Excavators are available for options Able to handle up to 70% solids by weight. Easy installation on the boom of hydraulic excavators.
Tobee Hydroman Submersible Sand Pumps are a worlds standard submersible agitator pump, Capable of transporting up to 70% solids, this pump is born to dredge and has earned itself a solids-handling reputation for reliability and durability in the worlds toughest applications, The wear parts are made from high chrome alloy, It is widely used in pumping sand, sludge, ore slurry, coal slurry, sand-stones containing big solid particles etc. Design Features: The whole machine is dry submersible pump and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so high pressure water and impurities are effectively prevented from entering inner cavity of the motor. Besides the main impeller,there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out.
Tobee Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps in the Industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. TJQ Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the highest head submersible, largest capacity, heavy duty slurry pumps available on the market. Design Features: HIGH-EFFICIENCY HIGH CHROME REVERSIBLE AGITATOR Doubles the life of the agitator. The excavating action is created by the hardened high chrome agitator blades. They create a current that lifts settled sediments conveying them to the suction of the impeller which delivers a continuous flow of solids to the pump discharge. LOW OPERATING RPM Low operating RPM promotes low wear rates and extended component life. When compared to other pumps of similar capacity Hydroman has a lower operating speed.
Tobee AFR Rubber Lined Vertical Froth Pumps are designed to increase the pumpability of corrosive frothy suspensions. The principle of operation is similar to that of hydro- cyclone separation. Air is separated from the corrosive slurry in a vortex created by the impeller rotation and the tangential inlet to the pumps conical sump. This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking. Design Features: Integrated unit for layout flexibility. Smooth operation of the open vortex created in the sump and vertical wet end inlet prevents air locking. Cantilever design does not require submerged bearings or shaft seals. Bearing assembly with double protection sealing arrangement to prevent ingress of slurry. Wear parts are available in a variety of different materials. Simplified maintenance.
Tobee 2QV-AF Froth Slurry Pump is vertical, double casing, single stage centrifugal forth pump, manufactured with advanced technology. The 2QV-AF froth pump can effectively eliminate the bubble in the slurry at work, even the slurry capacity is not enough the pump can work normally. It is suitable for various of flotation process and a perfect pump for handing frothy pulp indeed. AF vertical forth pumps capacity is much higher than that of other types slurry pump without shaft seal and sealing water. Design Features: Excellent performance, easy assembly & disassembly, high reliability and etc. Without shaft seal and sealing water. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to Any eight positions to suit installations and applications.
Tobee 3QV-AF Vertical Froth Pump is designed to increase the pump ability of frothy slurries. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump's conical sump. This results in more efficient pumping at higher capacities and a smooth operation. It is ideal product for the transporting of slurries with lots of froth, especially the slurries in the minerals flotation processing. Design Features: Submerged in liquid, delivering abrasive & corrosive slurry which contains froth. Double casing structure No shaft seal and flushing water The parts immersed in liquid can be wear resistant metal or rubber Easy to maintain
Tobee 6SV-AF Froth Slurry Pump has been designed to increase the pump ability of frothy slurry. The principle of operation is similar to that of hydrocyclone separation. Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pumps conical sump. This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by air locking. Design Features: AF rubber lined and hard metal vertical froth pumps were designed as one integrated unit for flexible layout and simple installation. The pump, pump sump and driver are integrated in one self contained unit. Simple to install and connect. No alignment or special foundations needed. The design ensures minimum maintenance and eliminates any requirement for water flushing. Impeller clearance is maintained by external axial adjustment of the shaft/bearing assembly.
Tobee 8SV-AF Vertical Froth Pump is latest generation of froth pump based on advanced technology at home and abroad. It is vertical shaft configuration, and comprise a hopper, with vertical bearing assembly. 8 inch froth slurry pump is designed for transporting high abrasive and corrosive froth slurries, Especially used in the flotation process. Design Features: Vertical froth pump is suitable for transporting slurry with froth, especially for flotation processing . It can eliminate the froth or foam in the running slurry and work normally even if the feeding slurry is not enough. The froth pump wet parts are made of Ni-hard and high chromium wear-resistant alloy materials. Funnel charging box is of steel structure. The discharge direction of froth pump can be oriented at intervals of 45°. The vertical froth pump adopts double-casing structure, with stable performance, high efficiency, wear resistance, and great interchangeability of components.
Tobee AF Vertical Froth Slurry Pumps are latest generation of froth pump based on advanced technology at home and abroad. It is vertical shaft configuration, and comprise a hopper, with vertical bearing assembly. AF froth slurry pump is designed for transporting high abrasive and corrosive froth slurries, Especially used in the flotation process. Design Features: Excellent performance, easy assembly & disassembly, high reliability etc. Dont need shaft sealing and sealing water. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Tobee WNQ Submerged Dredge Pumps are also known as onboard dredge pumps, It can either be installed onboard of the dredging vessels or in the suction pipe or cutter ladder as submerged pump. Onboard dredge pumps are the primary power source for transporting the mixture to the hopper or discharge location. The dredge pumps are also essential for mixture transport in stationary dredgers and at pipeline booster stations. The WNQ series dredge pumps are single-walled conventional and high performance types, complete with drive, support and control systems. They can respond to a wide range of operational requirements. Each offers benefits according to dredging materials, circumstances, and weight and space limitations. Design Features: Heavy Duty - a double-walled pump construction fully equipped with interchangeable wear parts. Excellent configuration for the most demanding operations. Performance - a single-walled construction furnished with, where possible, replaceable wear parts. An all purpose dredge pump and balanced option as regards weight, size and replaceable wear parts. Easy - for operations that are less demanding. This is a single-walled construction without any replaceable wear parts - a pump construction with as few components as possible.
Tobee WN300 Dredge Booster Pump is a kind of highly effective wear-resistant marine dredging pump, The wetted parts like Impeller, volute liner, front liner and black liner is made of high chrome alloy. WN300 dredge pump is mainly used in dredgers for dredging river, dredging sands, Blowing sand reclamation, Dredging port, cleaning lake and sea etc. Design Features: WN300 Dredge Booster Pumps are the heart to the dredgers according to its capacity, working efficiency, transferring distance, suction depth. DOD Dredge Pump are designed with features of resistance to wear and malfunction, and general robust and reliable character, which are highly successful proven in abrasive sand dredging industry. Dredge Booster Pump offer a complete range of single-or double-walled, inboard or submerged, which are available for different uses. They can be used in inboard or submerged by single and double walled types.
Tobee WN450 Sand Dredge Pump is singe stage single suction horizontal cantilevered centrifugal dredging pump. Tobee designs and researches this new type dredging pump by making full use of advanced CAD software, aiming to dredging river, lake and seal which is in great need to dredge in the world. The use of this dredge pump has remarkable comprehensive economic benefits and can meet dredging ship's requirements completely. Design Features: Structure suitable for dredgers: The structure of WN450 type dredge pumps are single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
