FEATURES .An agitator is provided to assist smooth suction of the pumping fluid .The side -flow, top- discharge keeps the motor cooling even the pump runs continuously .High chrome iron Semi -open impeller enables the pump to maintain its original performance OPERATING CONDITIONS .Liquid...
1. Introduction HP-220-5-03 peristaltic pump is specialized for condensed fluid recycle, to make sure that elements can work smoothly, such as cooler and catch tray. Synchronous generators and gear wheel can prevent condensed fluid refluxing. 0.3L/h pipetting of the pump can eliminate the condensed fluid. The pump has superior creep resistance and antifatigue function. 2.Features Preventing condensed fluid refluxing efficiently 0.3l/h pipetting Easy to replace new pump Containing superior Germany peristaltic pump tube 3.Specification Rpm: 5rpm or 10rpm Flux: 0.3NL/h Power supply: 220VAC/50Hz 3.5W Connecting material: PVDF Interface form: PVDF, OD6mm ferrule Pump tube size: D7.5mm/ID4.3mm L=125mm
Features of Infusion Pump 1. HD LCD Display, high capacity words, friendly user interface, dynamically display working status; 2. Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents; 3. Compatible with any brands of infusion sets after correct calibration; 4. Preset solution volume to greatly reduce the workload of nurses; 5. Work mode: ml/h and drop/min can switch freely; 6. Three levels of occlusion: high, middle and low; 7. Purge function; 8. KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 1-5ml/h(1ml/h step); 9. Power Source: AC100---240V, 50/60Hz; Internal Battery; 10. Automatically record the settings of last infusion; 11. BYS-820D can store 2000pcs of infusion records and it has a drug library. 12.OEM is available. Specification of Infusion Pump Rate 1ml/h ~ 1,200ml/h Flow Rate Accuracy Within ±5% (after correct calibration) Mechanical precision Within ±2% Purge Rate 100ml/h ~ 1,000ml/h (100 ml/h step) Infusion Volume 1ml ~ 9999ml Total Infusion Volume 0.1ml ~ 9999.9ml KVO rate 1ml/h ~ 5 ml/h (1ml/h step) Occlusion High: 800mmHg ±200mmHg (106.7kPa±26.7kPa Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa ) Unique audible and visible alarm Human voice alarm for End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc. Power Source AC 100V ~ 240V, 50/60Hz; Internal rechargeable Li battery, capacity�?�1,600mAh, 4 hours internal battery backup Bubble detector Ultrasonic wave detector; detection sensitivity �?�25μL Fuse F1AL/250V, 2 pc inside Power Consumption 18VA Operating Condition Ambient temperature: +5�?? ~ +40�??; Relative humidity: 20 ~ 90% Atmospheric pressure: 86.0kpa ~ 106.0kpa Transport & Storage Condition Ambient temperature:-30�?? ~ +55�?? Relative humidity: �?�95% Equipment Classification Class II, internal power supply, Type CF IP Classification IPX4 Dimension 140mm (L) �?157mm(W) �?220mm(H) Weight 1.8kg (net weight) penny at csbeyond.com -
Product Description: CMEP-OL oil less explosion proof refrigerant recovery machine is specially designed for light hydorcarbon refrigerants,such as R600,R600A and R290,etc.It's suitable for the service of household A/C,fridge and oil extraction. Unique Advantages: 1.Specially designed for ligh hydrocarbon(HC Refrigerants) 2.Food grade material and PTFE seal 3.explosion and leak proof design with UL listed explosion proof motor 4.1HP oil less dual cylinder high efficiency compresor for 24 hours running 5.high pressure protection for safety with deep ultimate vacuum 6.Vapor recovery rate:less than 71.6Kg/h(2.63lbs/min) 7.All of the fitting is designed according to UL explosion proof standard 8.Voltage: 115V 60Hz 9.Weight:43Kg Company Information: CM refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc) are widely used in the field of HVAC/R. CM is a comprehensive hi-tech. Enterprise specialized in R&D, manufacture, sales of products for HVAC/R industry. CM factory, Nanjing Wonfulay Precision Machinery Company Ltd, is located in Nanjing, China. Ever since its establishment in 1990s,CM dedicates itself to R&D and manufacturer of refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc). With its unremitting efforts and more than 20 years of experience, their refrigerant recovery systems have got several national and international patents and their machines have earned good reputation among the customers. Refrigerant recovery machine of CM are sold all over the world in 46 countries. CM recovery systems have got ISO and CE certificate and all the machines are made according to the ARI 740 standard. CM has established long term and harmonious cooperation relationships with YORK, MIDEA ,CARRIER, MCQUAY, etc. CM is your trustworthy partner. Our aim is to become you environmental service helper and your financial manager who will supply you commercial, residential and customized refrigerant recovery equipments (recovery/recharge/reclaim/vacuum/etc) worldwide.
Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour SHAFT : Stainless Steel 420 H&T TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate SEAL : Nitrile Rubber Oil Seal IMPELLER / ROTOR : Dynamically balanced WINDDING WIRE: Poly wrape Double coated copper wire
Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal BUSH BEARING : GM LTB 4 SEAL : Nitrile Rubber Oil Seal ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Dynamically balanced WINDDING WIRE : Poly Wrap Double coated copper wire HP 0.5 HP to 2.0 HP HEAD 7.5 Mtrs to 32.5 Mtrs CAPACITY :40 LPM to 480 LPM VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 11 Nos. HP 1.0 HP to 30 HP HEAD 5 Mtrs to 75 Mtrs CAPACITY 40 LPM to 5200 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 166 Nos.
Salient Features Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor It also works on Low Voltage Easy installation and easy Servicing MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire HP 0.5 HP to 2.0 HP HEAD 6 Mtrs to 28 Mtrs CAPACITY 25: 550 LPM VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 24 Nos. HP 0.5 HP to 25 HP HEAD 6 Mtrs to 86 Mtrs CAPACITY 25: 2100 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 53 Nos.
Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 20.0 HP to 120 HP THREE PHASE 300- 415V HEAD 10 Mtrs to 150 Mtrs CAPACITY 1000 LPM to 4000 LPM VOLTAGE - AC 300- 415 V, 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.
Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING: G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 10.0 HP to 80 HP THREE PHASE 300- 415V HEAD 15 Mtrs to 280 Mtrs CAPACITY 300 LPM to 2400 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.
Salient Features : Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost MOTOR BODY : Stainless Steel with 1% Nicke STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hou THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plat BUSH BEARING : GM LTB ROTOR SHAFT : Stainless Steel 420 H& SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wi PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamically balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 2.0 HP to 30 HP THREE PHASE 300- 415V HEAD 4 Mtrs to 228 Mtrs CAPACITY 350 LPM to 2150 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBERS OF MODEL More than 800 Nos.
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller It Operate Submerged Beneath The Surface Of Water Prime Mover Motors Are Wet Type, Water Lubricated Easy installation And Easy Servicing It Also Works On Low Voltage Energy efficient design Good Quality Components And Parts Require, less Maintenance 50 feet head per stage pumps are design for hihg head application Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating 50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting SINGLE PHASE : 180- 240V THREE PHASE : 300- 415V HEAD 4 Mtrs to 465 Mtrs CAPACITY : 45 LPM to 1200 LPM VOLTAGE : AC 180- 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL : More than 800 nos. ISI MODEL : More than 300 nos.
Salient Features : Multi Stage Centrifugal Pump With Radial & Mixflow Impeller It Operate Submerged Beneath The Surface Of Water Prime Mover Motors Are Wet Type, Water Lubricated Easy installation And Easy Servicing It Also Works On Low Voltage Energy efficient design Good Quality Components And Parts Require, less Maintenance 50 feet head per stage pumps are design for hihg head application Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost Motor Body : Stainless Steel With 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating 50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting HP 2.0 HP to 30 HP SINGLE PHASE : 180- 240V THREE PHASE : 300- 415V HEAD : 4 Mtrs to 465 Mtrs CAPACITY : 45 LPM to 1200 LPM VOLTAGE : AC 180- 240 V (Single Phase), 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL : More than 800 nos. ISI MODEL : More than 300 nos.
Salient Features : Multi Stage Centrifugal Pump With Radial / Mix flow Impeller It Operate Submerged Beneath The Surface Of Water Prime Mover Motors Are Wet Type, Water Lubricated It Also Works On Low Voltage Easy Installation And Easy Servicing Good Quality Components And Parts Require, less Maintenance Motor : Motor Body : Stainless Steel with 1% Nickel Stamping : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour Thrust Bearing : Stainless Steel 304 Tilting Pad Segment with Carbon Plate Bush Bearing : GM LTB-4 Rotor Shaft : Stainless Steel 420 H&T Seal : Nitrile Rubber Oil Seal Winding Wire : Poly Wrap Double Coated Copper Wire Pump : SUCTION / NRV : Graded [G20] Cast Iron Bowl / Impeller : Noryl-glass Field With Stainless Steel Neckring Pump Sleeve : Stainless Steel 410 with Hard Chrome HP : 0.5 HP to 1.5 HP 1Ø HEAD : 9 Mtrs to 120 Mtrs CAPACITY : 10 LPM to 95 LPM VOLTAGE : AC 180 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 25 Nos.
Product Details: After Sales Service Available: Yes Application: Hydraulic Pump Condition: New Types: A8V107 Hydaulic Pumps for Sumitomo LS2800 Hydraulic Excavator Quick Details Fits with Machine Model: Sumitomo LS2800 Excavator Place of Origin: India, South Korea, Australia Packaging & Delivery Packaging Details: Standard Package Delivery Time: Negotiation Specifications Choose Sumitomo LS2800 hydraulic excavator hydraulic pumps. The pump will deliver exceptional functionality, durability and YantraLive's extensive line of hydraulic pumps delivers the best machine performance. Buy Hydraulic Pump for Sumitomo LS2800 Excavator at Best Price. For the variegated demands of our prestigious buyers, we are highly engrossed in providing a wide range of Hydraulic Pumps for Excavators. Our offered Hydraulic Pump is precisely manufactured using the best grade raw material and modern technology. The provided Hydraulic Pump is highly appreciated among our buyers owing to its optimum strength and simple installation features. This Hydraulic Pumps can be availed in as per the requirements of our buyers. Furthermore, to avoid any flaws, the offered Hydraulic Pump is tested by our quality experts against various quality parameters.
Applications For water supply from wells or reservoirs For domestic use,for civil and industrial applications For garden
Application Transferring sewage and wastewater to wastewater treatment plant. Dewatering waste water from industrial plant (e.g. petrochemical plant. etc) Pumping wastewater explosive atmospheres likely to present Operating
Application Water water drainage in factories, construction sites and commercial facilities. Drainage system in municipal sewage treatment plants. Drainage station in residential quarters Municipal projects Methane pool and field
Pump: 1. Cast iron pump body under special anti-rust treatment. 2. Max. Immersion depth: 5m. 3. Max. Liquid temperature: +40â?? 4. Liquid PH value: 4-10 5. Max. Liquid density: 1.2*10³kgs/m³ Motor: 1. Buit-in thermal protector
OIL PUMP FOR CUMMINS,ENGINE PARTS FOR CUMMINS
High Head Large Capacity Centrifugal Vertical Cast Iron Submersible Sewage Pump Usage: farm irrigation, mining and so on.
