Voltage:12V/24V Power:245W Flowrate:50L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm
Voltage:220V AC Power:550W Flowrate:60L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm
Voltage:220V Power:550W Flowrate:60L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipments. Product details: Pumping Fuel: Diesel and kerosene Power: Electric Application: Transfer fuel to vehicles or construction fields' engineering work or maritime navigation.Technical Parameters: Flow Rate : (20-40)L/min Rated Voltage : DC12V or DC24V Pressure: 0.16-0.18Mpa; 1.6-1.8bar; 23-26psi Suction Lift : 3-5m Head Lift: 5-10m In-out: In BSPT3/4", Out BSPT3/4" Voltage: 12V/24V Power: 245W Flowrate: 50L/min height: 10m Inlet diameter: 25mm Outlet diameter: 25m
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipments. Product details: Pumping Fuel: Diesel and kerosene Power: Electric Application: Transfer fuel to vehicles or construction fields' engineering work or maritime navigation.Technical Parameters: Flow Rate : (20-40)L/min Rated Voltage : DC12V or DC24V Pressure: 0.16-0.18Mpa; 1.6-1.8bar; 23-26psi Suction Lift : 3-5m Head Lift: 5-10m In-out: In BSPT3/4", Out BSPT3/4" Voltage: 12V/24V Power: 245W Flowrate: 50L/min height: 10m Inlet diameter: 25mm Outlet diameter: 25m
Product introduction: This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipments. Product details: Pumping Fuel: Diesel and kerosene Power: Electric Application: Transfer fuel to vehicles or construction fields' engineering work or maritime navigation.Technical Parameters: Flow Rate : (20-40)L/min Rated Voltage : DC12V or DC24V Pressure: 0.16-0.18Mpa; 1.6-1.8bar; 23-26psi Suction Lift : 3-5m Head Lift: 5-10m In-out: In BSPT3/4", Out BSPT3/4" Voltage: 12V/24V Power: 245W Flowrate: 50L/min height: 10m Inlet diameter: 25mm Outlet diameter: 25m
Technic card: Draining speed: 0.6-1.6L/min Oil drain pressure: 1bar Pot body: 75L Air consumption: 200L/min Cup: 10 L 75 l. Trailer-mounted suction equipment complete of 6 suction probes (rigid diam. 8 X 900 mm. - flexible diam. 8 / 6 / 5 X 900 mm. ). Appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehivle. They anable extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided, from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank thanks VENTURI system), they are entirely independent and need no continuous connection with the source of compressed air (compressor). Simples to use, extraction is pneumatic, they are equippedes with a pressure relief valve set to 0.5 bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 m long. The suction tube (with heat insulated handle) is 1.65 m long. Equipped with 6 suction probes: Rigid diam. 8 mm and flexible diam. 8 / 6 / 5 mm.
Pneumatically pump the speed of oil: 0.6-1.6L/min Connects the height of oil: 1.9m Pot body: 80L Tray: 10L Cup amount: 10L These exhaust extraction equipments are appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehicle on a lift or over a pit and on the ground. Brake oils, corrosive liquids, fuels, or infiammable liquids in general must not be extracted.
Technic card: Draining speed: 0.6-1.6L/min Oil drain pressure: 1bar Pot body: 75L Air consumption: 200L/min Cup: 10 L 75 l. Trailer-mounted suction equipment complete of 6 suction probes (rigid diam. 8 x 900 mm. - flexible diam. 8 / 6 / 5 x 900 mm. ). Appliances to change the oil of engines, differentials, gearboxes, ect...Quickly and practically on any vehivle. They anable extraction of hot exhausted oil (70/80�° C) through one of the 4 sensors provided, from the engine sump of vehicles on the ground. After depressurizing (creating a vacuum inside the tank thanks VENTURI system), they are entirely independent and need no continuous connection with the source of compressed air (compressor). Simples to use, extraction is pneumatic, they are equippedes with a pressure relief valve set to 0.5 bar that ensures absolute safety. The outlet pip, equipped with a terminal elbow, is 1.5 m long. The suction tube (with heat insulated handle) is 1.65 m long. Equipped with 6 suction probes: Rigid diam. 8 mm and flexible diam. 8 / 6 / 5 mm.
Hand operated grease plunger pump suitable for NLGI000#,00#;0# grease.
Hand operated grease pump suitable for NLGI000-1# grease viscosity. Tank capacity :1.5L/2L/3L.
Product Description Hot popular selling hand operated oil pumps... suitable 200L oil drum. Model: Y-25 Type:Hand operated Suction length:1.5M Max.heigt:5M Flowrate:15-25L/Min Revolution Speed:70/min Net weight:4.85KG Total length:1.3M,suitable for 200L barrel. Using instruction: when installation the tube thread please coated with a little magnetic oil and tighten to keep good seal. Before using please filling a little lubrication oil inside of the pump.Then turn round handhold to suction oil. After using please filling some lubrication oil into the pump.
Hot popular Stainless steel hand operated oil pumps... suitable for 20-30L oil drum;60L oil drum 200L oil drum.
Techniques: Tank capacity: 40L Delivery: 4CC/cycle Hose: 1/4", 2m Delivery pressure:
H20-G hand operated grease pump Detailed Product Description Specifications: 1) Capacity: 20kg 2) Barrel height: 485mm 3) Pump pressure: 102PSI-130PSI 4) Hose size: 1/4" X 3m 5) Suitable greases: NLGI-classes No. 0-2 6) Portable; To be operated manually; No electricity or air is needed. 7) Suitable for all sorts of machineries, vehicles, airplanes, ships, etc. 8) Deliver Rate: 4CC/cycle Packing: 1 set/CTN Carton dimensions: 35 X 35 X 61cm N. W.: 8kg G. W.: 10.5kg
Techniques: Tank capacity: 40L Delivery: 4CC/cycle Hose: 1/4", 2m Delivery pressure:
t is manual grease pump or injector which is used in injecting lubricant for equipments like bearings, valves, engines, etc. It consists of an oil injector and a tank which has a capacity of 13L. And it is widely applied in automatic maintenance, electricity generators or turbines, pumping units, cranes, and hoists etc. Techniques: 1) High pressure pump 2) Hose length: 2.2m 3) Tank capacity: 12L 4) Weight N/G: 10kg
He models are equipped with aluuminium-coated rigid spout on series. Flexible hose dia. Lenght supplied on request mod. Double acting oil pump 24 l/m Body fitted directly on drum. Standard equipment: Flexible hose d. 3 / 4 bsp 1300 mm. Long, bung-adaptor and Viton �® Seal Reciprocating volumetric single acting or double acting hand-operated pumps MEDIUM FLOW-RATE made in carbon-steel with aluuminium components and viton packings.
It is manual grease pump or injector which is used in injecting lubricant for equipments like bearings, valves, engines, etc. It consists of an oil injector and a tank which has a capacity of 13L. And it is widely applied in automatic maintenance, electricity generators or turbines, pumping units, cranes, and hoists etc. Techniques: 1) High pressure pump 2) Hose length: 2.2m 3) Tank capacity: 12L 4) Weight N/G: 10kg
Specifications Model: Y-8 Discharge Capacity: 8cc Maximum discharg pressure: 15 kgf/cm2 Tank capacity 600 C. C. Manual oil pump Description This Manual oil pump has been designed to deliver more flow and higher pressure than conventional ones, the lube can reach long travel and higher places - Flow of 8 cc per stroke. - Maximum discharge pressure of 15 kg/cm2. - Capacity of the oil tank of 600 cc - Automatic return of the handle. - Easy filling by removable cap. - Practical eye level in the front with minimum and maximum level indicator. - Rigid structure with holes mounts to be easily placed on any structure. This Manual oil pump delivers more lube and withstands more use than others, ideal to replace or add to any machine lubrication system.
