system, for which the solids diameter to separate ranges from 45 to 75 microns. kosun is a leader in china¡¡¥s solids control industry and expert in drilling waste management. Kosun is
We manufacture slurry pumps for various slurries in cement and concrete industry as well as other slurries across industries like pulp, clay and oil. Our slurry pumps are designed for sturdy operation with heavy duty cycles. Our pumps are precision manufactured to provide measured output or a continuous output as required. We provide two types of slurry pumps - peristaltic pumps and screw pumps, both used for positive flow of slurries. Please contact us with your requirements for further information on suitability and productivity.
¡¡4. Impeller type: non-clog (3/5vans) 5. Shaft sealing: packing/ mechanical ¡¡6. Wet parts material: a05, a07, steel 3) sand dredging pump general features: Xiyue brand xn sand dredging pumps are specially designed for dredge boat around river mud Delivering. It¡¯s single-stage, single-suction, centrifugal pumps with reliable structure and design. ¡¡¡¡1. Good structure design for marine using. ¡¡¡¡¡¡200xn-500xn series are single casing and 600xn-1000xn are two casing structure. ¡¡¡¡¡¡they both apply forward disassemble way and easy maintenance. According to the connection ¡¡¡¡¡¡with the pump working part, two structures can be offered: self-carrying bracket and pump ¡¡¡¡¡¡integrated with gearbox. The lubrication for the bracket is grease or thin oil. ¡¡¡¡2. Good dredging performance ¡¡¡¡¡¡good cavitations performance makes sure the pump high suction capacity and allows high ¡¡¡¡¡¡head and heavy concentration dredging. The impeller with width channel allows a large ¡¡¡¡¡¡flow and high head. ¡¡¡¡3. Good anti-abrasiveness pump wet parts ¡¡¡¡all wet parts are made by top anti-abrasive chromium alloy with good impact ¡¡¡¡ resistance and anti-abrasiveness. ¡¡¡¡4. Bearing seal type ¡¡¡¡¡¡200xn~500xn dredging pump apply mechanical sealing and packing seal. ¡¡¡¡¡¡600xn~1000xn dredging pump equipped with l-type spiral rubber seal which consist of 3 ¡¡¡¡¡¡l-ring of 1 sleeve to ensure the bearing sleeve water clean, it also equipped with sand ¡¡¡¡¡¡water separator. ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ 4) sand dredging pump structure: ¡¡ ¡¡xiyue brand xn dredge pump is a new type of sludge pump researched & manufactured By our company basing on international g type gravel pumps, aiming at rivers and seas out Of repair. Xn pump is a single-stage single suction cantilever horizontal centrifugal pump with ¡¡advantages of light weight, good wear-resistant, super dredging performance, perfectly suited Wooden box
Slurry pumps Range (discharge):1-18inch 2. Capacity: 10-5400 m3/h ¡¡3. Head: 5-125m ¡¡4. Impeller type: non-clog (open &close) 5. Shaft sealing: packing/gland packing & mechanical ¡¡6. Wet parts material: a05, a07, rubber, 3) slurry pump general features: 1. Xiyue brand xh/xhh slurry pumps are heavy duty pumps. They are cantilevered, horizontal, Centrifugal slurry pumps. Especially they are designed for most difficult pumping applications. 2. Xiyue xhh models are designed for heavy duty applications require high head per stage at high pressures. It is suitable for long distance transporting or where others require more than one pump in series. ¡¡3. Xiyue xh models display total interchangeability between hard metal and ¡¡¡¡elastomeric liner pumps. 4. They are mainly used in: power plant, chemical process, coal, heavy minerals, paper and pulp, mill discharge, lime grinding, bottom boiler fly, ash cyclone feed, slag granulation, suction hopper dredging, barge loading, sand reclamation ect. ¡¡¡¡¡¡ 4) slurry pump structure features: 1. Xiyue xh/xhh pumps are single stage, single suction, and overhang shaft, centrifugal, ¡¡¡¡double-casing horizontal type. Wet parts are made of abrasive resistant hard metal or rubber. ¡¡2. Bearing assembly use cylindrical structure, adjusting the space between impeller and ¡¡¡¡front liner easily, being removed completely when being repaired. ¡¡3. Bearing assembly uses grease lubrication. ¡¡4. The shaft seal could use the packing seal, expeller seal and mechanical seal. ¡¡5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented ¡¡¡¡to any eight positions to suit installations and applications. ¡¡¡¡ Material construction Pump body: cast iron/grey iron Wooden box
5. Shaft sealing: packing/gland packing & mechanical ¡¡6. Wet parts material: a05, a07, steel 3) gravel pump general features: ¡¡1. Xiyue brand xg sand gravel pumps are designed for continuous pumping of highly abrasive Slurries that containing large particles which the xh and xl series can't handle. ¡¡2. Xg sand gravel pumps are single casing structure, high efficiency, and wear resistant, wide flow Channel, good ability of npsh, stable performance, easy assembly, and the discharge ¡¡¡¡outlet can be adjusted at any directions. ¡¡3. They are suitable for delivering slurries in mining, explosive-sludge in metal melting, ¡¡¡¡dredging in dredger and course of rivers, sand reclamation ect. ¡¡¡¡ 4) gravel pump structure: ¡¡¡¡xiyue xg pumps are single casing connected by means of clamp bands and wide ¡¡¡¡wet-passage. The wet-parts are made of ni-hard and high chromium abrasion-resistance ¡¡¡¡alloys. The discharge direction of pump can be oriented in any direction of 360¡ã. ¡¡¡¡this type of pump possesses the advantages of easy installation and operation, good ¡¡¡¡performance of npsh and abrasion resistance. ¡¡¡¡ Material construction Impeller: high chrome alloy/steel Mechanical seal: carbon/ceramic/stainless steel Motor housing: alloy aluminum Shaft: carbon steel/stainless steel/high frequency wedding shaft Skype:allenfan83 Wooden box
Slurry pumps Our xh model=ah model 1) about us: ¡¡1. We are over 10 years leading professional slurry pump manufacturer in china. ¡¡2. Top quality of raw material castings. ¡¡3. Advanced equipment with mature experiences engineers. ¡¡4. Large size factory with strictly quality control system. 2) slurry pump parameter: Wooden box
Slurry pumps Our xh model=ah model 1) about us: 1. We are over 10 years leading professional slurry pump manufacturer in china. 2. Top quality of raw material castings. 3. Advanced equipment with mature experiences engineers. 4. Large size factory with strictly quality control system. 2) slurry pump parameter: 1. Size range (discharge):1-18inch 2. Capacity: 10-5400 m3/h 3. Head: 5-125m 4. Impeller type: non-clog (open &close) 5. Shaft sealing: packing/gland packing & mechanical Wooden box
Main parameter: Capacity(flow rate): 86.4-198 m3/h Head: 9-52 meter Rate speed: 1000-2200 r/min Impeller diameter: 245 mm 1. Application: Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection. 2. Sealing type of slurry pump: Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements. 3. Structure of slurry pump: Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements. Meanings of the model: mh75c M---------wear-resistant high chromium alloy H---------heavy type slurry pump 75------- the pump press out opening is 75 mm C -------bracket style Wooden box
Gravel and sand pumps for sales : 1.Horizontal, cantilevered, centrifugal, single stage slurry pump 2.Long bearing life: the bearing assembly is with large diameter shaft and short overhang. 3. Wear resistant and anti-abrasion wet parts: a05, a07, a33, a49 and rubber etc. They are completely interchangeable with each other 4. Easily replaceable liners: liners are bolted to the casing. 5. Easy adjustment of impeller: an impeller adjustment mechanism is provided below the bearing housing. 6. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple. Main parameter:mg150e
Power range: from 1 inch to 4 inch outlets, powered by: mitsubishi engine brand: brilliant, or oem low fuel consumption, low maintenance, with maximum reliability and maximum performance, this also helps greatly reduce the emission levels, for a much more environmentally friendly product.
Used in medical equipment for air sampling No idea
Series lmh slurry pump is mainly used for handling strong abrasive, high density slurries in the metallurgy, mining, coal washery, power plant, building materials and other industries etc. This series of slurry pumps have replaceable wear-resistant metal liners. Its wet parts are with throat bush, impeller, an be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pumps may be installed in multistage series to meet the delivery of long distance.
Series lrh slurry pumps are cantilevered, horizontal, centrifugal with double casings. They are designed for the handling of highly abrasive, high-density slurries. Structure: the wet parts of this pump are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt packing gland seal, expeller seal and mechanical seal. Application: series lrh slurry pump mainly applies in the metallurgy, mining, coal washery, power plant, building material and other industries. This pump can be installed in multistage series.
Introduction: Series lmhh slurry pumps are cantilevered, horizontal and centrifugal. The main feature of this series is to transport the slurry for high pressure. Because of its high speed, only metal lined pump could meet the design requirements and the rubber not. Structure: the wet parts of lmhh pump are made of wear-resistant alloy. The shaft seals for series lmhh may be packing seal and expeller seal. The discharge side can be oriented to any of the eight positions to suit installations and applications. Application: they are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps could be also installed in multistage series for long delivery Packing: plywood case
Introduction: As the sump pump, series lm(r)s pumps are of single casing and made of wear-resistant metal and natural rubber. The wear parts are made of high chromium for series lms and are rubber lined for series lrs. According to liquid level of the slurry pool, the vertical slurry pump transmission shaft and suction pipe could be chosen for different length. This sump pump could operate under the best condition with different speeds. Application: The vertical slurry pumps are designed to transport the abrasive, large particle and high-density slurries and applied over the fields such as metallurgy, mining, chemistry, coal washery, power plant, building materials and environmental protection.
Detailed product description Model: 350qzb-1600qzb, 1000-1400qhb Power: 5.5-1500 kw Discharge: 116 -10689 l/s Head: 1.1-16.44 m (3.6- 54 feet) Pump outlet diameter: 350-1400mm (13.7-55.1 inch) Dia. Of impeller: 267-1540mm (10.5-60.6 inch) Rotate speed: 485-1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6-9 Operating limits: Maximum ambient temperature 50¡ãc Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50-60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: #45 steel Application: * applied to farm irrigation and drainage, and water supply and drainage for industrial and mine enterprise, dock, civil project and power station, etc. Advantages: In wooden box
Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
Detailed product description Model: qjx series Flow rate: 80-600 m3/h (22.2-166.7l/s) Head: 20 to 210 m (65.6 to 688.9 feet) Max. Rotate speed: 3000 r/min Pump outlet dia.: 360mm, 450mm, 505mm Ph value: 6.5-8.5 Operating limits: 1, maximum ambient temperature: 20 deg c 2, maximum immerging depth for the first stage: 500mm (19.7 inch) 3, maximum hydrogen sulfide component: 1.5mg/l 4, maximum chloride ion: 400mg/l. Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 220kw Materials: cast iron, stainless steel Application: * applied to getting water from the river and lake, water supply and drainage for mine, the foundation and In wooden box or as your request.
Noise level at 7 meters (dba) 75 Diesel engine engine 178f Diesel engine type air cooled, 4 stroke, single cylinder Power output (hp) 6 Other n.W/g.W(kg) 48/50
Treadle pump.
