Pump type MA is the standard heavy duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minmal maintenance requirements. It maintains high e�ciencies over the wear life of its components. This type of pump typically used in process plant transfers, wet waste processes, recycling-washing plant, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.
Pump range:
Discharge Size: 1" to 18"
Capacity: 4 to 5400 m³/h
Heads: 5 to 75 m
Typical application:
- Mill discharge
- Coarse sand
- Tailings
- Mineral concentration
- Heavy media
- Coal washing
- FGD
- Process chemical
- Bottom / fly ash
- Metal smelting
Product features;
- Elastomer or high chrome alloy liners provide corrosion & abrasion resistance, plus the interchangeability to reduce the maintenance cost and maximize wear life
- Large diameter, high e�ciency impellers designed to o�er maximum wear life and low operating cost, wide options of impeller for speci�c applications
- Gland, expeller or mechanical seals are available to suite di�erent working conditions
- The bearing can be grease or oil lubricated which o�er ease of maintenance and reduced downtime
- The pump can be installed in multi-stage high pressure operation
- Large internal passage designed to reduce internal velocities, maximize wear life and lower operating cost
Contact us for more information:
Amanda Chen
+86 19921054564
Indoma Industries Pvt. Ltd. revolutionized the desert cooler industry by introducing a technological marvel- Littelpump back in 2002. Due to its numerous advantages, it made the vertical pump obsolete in no time. Littelpump uses PMT technology which ensures long life and relief from calling electrician to change the pump every year.
Allied Electricals is leading manufacturer of Industrial Coolant Pumps.we offer wide range of high-quality pumps to different industries.We also manufactures and indirectly exports CP and CPM Coolant Pumps,Our coolant pump machines are versatile, cost effective and robust, producing high quality goods at reasonable rates.
Product Description
IES Ideal End Suction Pump
IES Series is single stage, single suction back pull out type
Dimensions are according to EN733 (DIN24255) standard
Flange can be drilled according to ISO, DIN, BS or ANSI standard
Shaft with mechanical seal as standard and gland packing optional
Materials available (Cast iron, Ductile iron and SS316 etc.)
Performance Range
Flow Rate (Q) Up to 1100 m3/h
Head (H) Up to 152m
Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ)
Temperature -10 Celsius to 105 Celsius, (Optional 130 Celsius)
Applications
HVAC & Cooling Tower
Fire Fighting
Chemical Liquid Transfer
Irrigation & Agriculture
Booster & Pressurization Set
Definition of Model
IES 65/20
IES - Single Stage, End Suction Pump
65 - Discharge Diameter (mm)
20 - Impeller Nominal Diameter (mm)
This product can be installed by YZ1515x, YZ2515x, DG series pump heads.etc.
With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
Long life, Touch screen control, easy to operate,
3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
KL-APV1&APV2 suitable for APV Pump.
Standard Size: 25mm, 35mm and 55mm.
Kalu also offer mechanical seals stocks for replacement of Grundfos Pump Seal, Flygt Pump Seal, APV Pump Seal, also supply mechanical seals for INPOXPA PROLAC and SLR Pump.
This product is normal safe mine equipment. It is new type water drainage and supply equipment which is applied to the industry of coal, metallurgy, power, urban construction, running water and ground water development, etc.
Discharge:240-1450m3/h
Head:25-1000m
Power:55-2400kw
Voltage:380v 660v 3kv 6kv
Model: qjt, qj, qjg series, 800 sizes in total.
Flow rate: 5-600 m3/h (1.4-166.7l/s)
Head: 6 600 m (19.7- 1968.5 feet)
Well diameter: 150-400mm (5.9 -15.7 inch)
Max. Rotate speed: 3000 r/min
Pump size: 6-14 inch
Operating limits:
1, maximum ambient temperature: 20 degree c
2, maximum immerging depth: 70m (229.6 feet).
Motor:
1. Rewindable motor
2. Voltage: 380v
3. Frequency: 50hz
4. Max. Power: 250kw.
Materials: cast iron, stainless steel
Application:
* applied to farm irrigation, water supply for inhabitant, industrial and mine enterprise, etc.
Advantages:
1) the performance and efficiency of our qjt series pumps is better than qj series with national standard: with multi-impellers for one pump body, its single stage head is 1/3-1/2 times taller than that of qj and the efficiency is 1-3% higher than that of qj.
2) with perfect design and proper structure, it has the advantages of lower noise, longer service life, smaller volume, high efficiency, energy-saving, easy and convenient installation and maintenance, etc
3) greater weight for same bulk
4) completely meeting power standard by testing
5) long service life: normally 4-5 years.
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity.
Nominal outlet diameter: 350-3200mm
Head: 0-10m
Flow rate: 0.4-25 m3/s
Power:22-1500kw
Voltage: 380v, 660v 3kv, 6kv, 10kv
Water conditions:
Water temperature=50 deg.C
Ph value: 4-10
Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc.
Power: 22 to 500 kw
Discharge: 500 to 20000 m3/h
Head: 1.5 to 15 m (3.6- 54 feet)
Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch)
Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch)
Rotate speed: 485 to 1450 r/min
Angle of impeller installation: from -6 deg. To +6 deg.
Ph value: 6, 9
Operating limits:
Maximum ambient temperature 50 deg. C
Motor:
1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor
2. Insulation grade: f
3. Protection grade: ip68
4. Double/triple mechanical sealing
5. Equipped with special control cabinet
6. Voltage: 380-10000v
7. Frequency: 50; 60hz
Materials:
1. Pump body: cast iron
2. Impeller: stainless steel
3. Shaft with rotor: 45 steel
Advantages:
1)the integration of pump body and motor without other assembly process
2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering.
3)lower noise and underground pump station.
4)easy, reliable and steady operation, realizing remote control.
5)greater weight for same bulk
6)completely meeting power standard by testing
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity.
Nominal outlet diameter: 350-3200mm
Head: 0-10m
Flow rate: 0.4-25 m3/s
Power:22-1500kw
Voltage: 380v, 660v 3kv, 6kv, 10kv
Water conditions:
Water temperature=50 deg.C
Ph value: 4-10
Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
5754 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
