Norprene A-60-F food processing hose can withstand the high temperatures that occur during food and beverage processing, and is more durable than other food hoses and has better performance. Even if it is exposed to high temperature and ozone, it will not crack or deteriorate like traditional rubber pipes.
Norprene A-60-F food processing hose is very flexible and can withstand bending and maintain its shape during quick and easy installation. Its excellent resistance to bending fatigue makes it the best choice for peristaltic pump tubing often used in batching equipment.
Features:
1. Corrosion resistance: resistant to moderate strength acid&alkali.
2. Ingredients: neoprene.
3. Physical characteristics: yellow opaque, hardness 61, poor ventilation, UV Class A, ozone B grade.
4. Temperature range: -51~135
5. Sterilization method: high temperature and high pressure sterilization (repeated sterilization does not affect life).
6. Standards: FDA, NSF 51, 3A
7. Service life: normal temperature and pressure, 50 rpm, 24 hours continously extruding , about 10,000 hours of life(intermittent use can extend the tube life).
Peristaltic pump tubing Characteristic
Norprene A-60-F tube is available in a variety of sizes. Suitable for various peristaltic pump heads.
1. More durable than other food-grade tube.
2. Excellent abrasion resistance.
3. Excellent bending fatigue resistance.
4. Even if the long-term exposure of high temperature, ozone, UV ultraviolet environment, it will not like the traditional rubber tube that aging cracking.
5. With excellent ozone and UV resistance, in the laboratory simulation of outdoor exposure for 10 years, only a small amount or even no signs of deterioration.
6. Completely free from the effects of various disinfectants and detergents.
7. Compatible with various oxidants, such as hydrogen peroxide, sodium hypochlorite and ozone.
8. Can be repeated high temperature autoclave disinfection, will not affect the quality and life of the tube.
9. Ideal choice of CIP and SIP cleaning, disinfection system.
10. Norprene A-60-F I.B. pressure-resistant tube, 4 times larger than ordinary tube.
Glycerin/Oil/watter filling peristaltic dosing pump
Two kinds of operating modes, transferring and dispensing, can be switched freely, to ensure the quantitative distribution of the fluid.
Memory function available in case of power off and it will continue the work once the power was restarted.
Supports MODBUS communication protocol through the DB15 interface of the drive. And communication protocols customized is available.
CR peristaltic pump LG350M is a liquid constant transfer pump. that can run with KZ50 pump heads, with flow rate from 10-33000 ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V, and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.
2 nozzles 4 nozzles 6 nozzles Multiple Channels Liquid Filling Peristaltic Pump
This multiple channels filling peristaltic support PLC control which can work with your packing machine.
Support Nozzles number customized to meet your production requirement .
UTF01 is a filling peristaltic pump independently developed by Chuangrui Pump. It consists of an intelligent filling system and the main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which can be expanded up to 32 channels. UTF01 can be installed with multiple types of pump heads and adapted to multi-specification tubes, which can fully meet customer application needs and provide more flow selection. Various functions, large screen display, touch screen operation, accurate flow, make filling production more peace of mind. Multiple channels can be opened at the same time for liquid filling, or the filling value of each channel can be set individually for filling. Support customized solutions.
Hose for fuel, lubricating oil
The characteristics of:
For the vast majority of oil and chemical products, not brittle no swelling.
Resistance to ozone and ultraviolet radiation
Suitable for delivery of gasoline , diesel, heating oil, cutting oil and glycol refrigerant compound
5773 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
The plastic housing of ZN type of pump head is made of PC (Polycarbonate)materials, so its rigidity and structure are more excellent. Its strong capabilities of baring high temperature and erosion, especially the excellent performance in the aspects of strong chemical resistance such as resisting organic solvent, effectively reducing the damage rate of the pump heads and the customers's cost in maintaining and reparing.
1. CR peristaltic pump BT600FC can be installed by LP25-6 YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
CQB-FT series pump is New developed horizontal, seal less centrifugal magnetic drive pump, compliant with ISO/ASME/ANSI sealless pump standard for general emission-free services.
Flow: 3.6 to 200 m3/h
Head: 20 to 80 m
Temperature: -20 �°C to +100 �°C
Model No: CQB40-25-200FT
Leak-proof design.
-Seal-less Teflon lined (FEP or PFA magnetic drive pump, driven by magnetic coupling indirectly, motor shaft and pump chamber is completely sealed, avoid pump leakage problem and use site pollution.
-Wetted part material is PTFE fused with FEP, can transfer low and high concentration acid, alkali, strong oxidizer etc corrosive liquid.
-Robust pump casing. The part contacting with liquid material is fluoroplastic, pump casing material is cast iron, and pump casing can bear part of piping and mechanical impact.
-The structure is tightly, safety, and energy-saving.
-Cost-intensive wearing parts are canceled by the seal-less method of construction, therefore, reduced maintenance costs and long service life.
The Pump Housing
. Virgin Fluoroplastic
- Considerably easier and more reliable quality control
- No reduction in the permeation resistance.
- Pure pharmaceutical and fine chemical media: no contamination
With ductile cast iron casing absorbs all the hydraulic and pipework-forces.
According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required.Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]
-The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Efficiency and operational reliability benefit from this .Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.
Close Impeller
Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates .Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media
Application
Corrosive, pure and contaminated media in the chemical,
pharmaceutic and petrochemical industries,
In metal processing,
waste water treatment etc.
When Stainless steel is not sufficiently resistant
Alternatively to expensive Haste alloy, titanium alloy Pumps
The DG series micro-flow multi-channel peristaltic pump head is a separate card installation and special hose; the pressure tube
gap can be fine-tuned to adapt to different wall thickness hoses. Designed for small flow, multi-channel fluid delivery.
Electric Explosion Proof Peristaltic Pump.Can be installed large flow pump head with maximum flowrate of 12000ml/min (single channel).
A sharp explosion peristaltic pump can be mounted high flow pump head. Speed can be adjusted manually adjust the speed planetary CVT. Used in various environments, in particular, the requirement to use explosion-proof environments.
Explosion-proof pumps are also used to move gasoline, diesel fuel, oil, ground water, potable water, salt water, wastewater, sewage, sludge, slurry and ash slurry, gas and air, powders, and rendering wastes, a variety of liquids, liquids with solids, etc.
Chuangrui peristaltic pump tubing using silica gel and platinum molded with vulcanizing agent, odorless, non-toxic, which process complex, translucent appearance, a high degree of cleanliness, good elasticity, autoclavable, widely used in food cosmetic and medical. It is an ideal pump tube for peristaltic pump liquid transmission.
Tube material: Platinum vulcanized silicone.
1. The best way to select a tube is that to decide which materials are chemically suitable at first, and then choose the one which best meets the physical demands of the application.
2. For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed.
3. Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed.
SC600-2 Portable Peristaltic Pump retains its own advantages of Peristaltic Pumps, single-tube single-use quick loading, and unloading, no cross-contamination; wide flow processing range, forward and reverse operation is reversible. Replaceable charging
Power supply, light, and portable, flexible operation, can easily handle stratified sampling, deep water sampling, indoor and outdoor sampling of gas samples, high-viscosity liquids, small particle suspension liquids, etc., especially suitable for the field
Environmental operations.
Battery Powered Peristaltic Pump is suitable for environmental monitoring stations, water treatment, gas and liquid, layered sampling, collection of medical-grade specimens, and other fields.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
Glycerin/Oil/watter filling peristaltic dosing pump
Two kinds of operating modes, transferring and dispensing, can be switched freely, to ensure the quantitative distribution of the fluid.
Memory function available in case of power off and it will continue the work once the power was restarted.
Supports MODBUS communication protocol through the DB15 interface of the drive. And communication protocols customized is available.
ZG600 CR peristaltic pump using high-power DC motor driven pump head, powerful output power, torque, variable speed multi-turn potentiometer. Desktop structure, flow stability, and torque, low noise, simple operation, can drive double pump head. Drive within the speed range 60 ~ 600rpm/min , greater pressure for industrial fluid transfer applications. Switch on the operator panel control of the pump working state, the encoded knob to adjust the pump speed.
Model: WT600/KZ25
Speed range: 30-600 rpm
Max Flow : 6000 ml/min
Max Number of Channel: 2*kz25 4*YZ15
Power supply: AC110V or AC220V
Basic type liquid constant peristaltic pump with Flow reversible
304sss housing prolong pump life time.
Good electromagnetic compatibility, ensure stable and reliable operation
CE certified product based on request.
UTF03 is a filling peristaltic pump independently developed by Chuangrui Pump Industry. It consists of an
intelligent filling system and a main controller. The standard drive unit is 4 channels, which can be expanded
up to 32 channels. UTF03 is suitable for industrial pump head, which can handle precise filling of large flow
liquids. Various functions, large screen display, touch screen operation, accurate flow, make filling production
more peace of mind .
5773 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
