Roots vacuum pump (referred to as: roots pump) refers to the pump is equipped with two opposite direction synchronous rotation of the leaf rotor, the rotor, the rotor and the pump shell wall has a small gap between the non-contact with a variable capacity vacuum pump.
Roots vacuum pump animation:
Application of roots vacuum pump :
Roots vacuum pump, widely used in petroleum, chemical, plastics, pesticides, steam turbine rotor balancing, aerospace space simulation devices such as petroleum, chemical, metallurgy, textile and other industries.The accessories for the vacuum pump is vavuum pump muffler , which can deal with the noise.
Structural features of roots vacuum pump:
(1)within a wide range of pressure has a larger pumping speed;
(2) the rotor has good geometric symmetry, so the vibration is small, smooth operation.There are gaps between the rotor and the rotor and the shell, it needs no lubrication, friction loss is small, can greatly reduce the drive power, which can achieve a higher turn
Speed;
(3) the pump cavity without oil seal and lubrication, it can reduce the oil vapor, which will pollut the vacuum system;
(4) pump cavity without compression, no exhaust valve. The structure is simple, compact,
Characteristics of roots vacuum pump
1.Start fast,
2.Less power consumption,
3.Low operation and maintenance costs,
4.Pumping speed, high efficiency
1.QY electric high pressure grouting injection pump is coordinated with foreign machinery industrial manufacturer and is designed sophisticatedly. Considering that it is easy to carry and its lightweight, it is created with wear resistance materials and solid and durable performance, which can also exclude small injection pump's characters of lightweight but high failure rate , difficult maintenance and more minor defects.
2.High pressure injection grouting pump is the use of mechanical high pressure, to inject chemical grouting materials to concrete cracks when the slurry quick disperses, emulsify, inflate, consolidate, the elastomer will fill all concrete cracks, which will be completely blocked outside the concrete structure, in order to achieve the purpose of the leakage of water stop.
3.High pressure injection grouting pump must be used together with water sealing injection needle and injection grouting foaming agent
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
Flow: 20m3/h
Head: 64m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 78m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 91m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 130m
Power: 15kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 78m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 91m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 104m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 117m
Power: 13kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 65m
Power: 7.5kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 20m3/h
Head: 143m
Power: 11kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Flow: 25m3/h
Head: 78m
Power: 9.2kw
Material: cast iron
Medium: clean water
Outlet dia: 60mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380V
Phase: 3 phase/50Hz
Color: Blue
Deep well submersible water pump Overview:
Filed with: water
Flow range: 10—250m3/h;
Head range:5—121m;
Diameter scope:f30—f150mm;
Temperature range: =30?.
Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
Safe and reliable operation, no pollution to water.
Installation of deep well submersible water pump
1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motorcavity must be filled with water to cooling motor and lubricate bearings .
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.
Basic built-in control function for 1 cycle and 1-2 cycle
Embedding the best control algorism for heat pump system
Observation for input temperature of heat source and output temperature
4-way valve control and/or selected operation for cooling and heating
Sequential and alternative operation in case of 2 cycle control
Transmission output (temperature transmission)
PC monitoring system using RS485 communication based on MODBUS protocol
product features:
1.Safety:water and electric separately.
2.Hot water(75 degree) can be provided directly&constantly.
3.Patent mixed refrigerant using for high temperature &high pressure system.
4.Convenient:Intelligent microprocessor with touch screen display. Trouble shoot on display board automatically.
5.World famous brand compressor,4-wayvalve,motor,PCB,heat ex-changer Emerson ALCO expansion valve used to ensure top quality and high efficiency(Energy-Saving as much as 75%).
6.Multiple protection function:high pressure,low pressure,overheating,overload anti-freezing,phase sequence,discharge temperature,suction temperature and so on.
7.All weather operation: stable operation without being influenced by weather.
8.Metal case water tank with powder coating or stainless steel case are available.
9.Refrigerant of r22, r407c, r134A are for optional.
10.Automatically defrosting function included.
Technical parameter:
Heating capacity:12.0KW Heating power input:2.86KW Operating current:13.00A COP:4.2W/W Power supply:220V/1Ph/50~60Hz Refrigerant:R22&R407C&R134a
Unit noise level:53dB(A) Net/Gross weight:90/100kg Working temperature range:-7~45? Rated output water temperature:75?
Note: 1.Rated test conditions: Ambient temperature 20? ,Water temperature: inlet/outlet:15?/55? 2.The above designs and specifications might be changed without prior notice for product improvement.
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
5777 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
