1)Hydraulic pump for dump truck 2)23 & 34 gpm @ 1800 rpm 3)Pressures to 2500 psi 4)Speeds to 2400 rpm 5)Choice of mountings 6)Air remote operators available 7)Relief valve protects pump & cylinder 8)All pumps and relief valves are 100% factory tested
(inyectores)(elementos)(partes de bombas)bosch diesel 9308-621c /9308-618c( valvulas)(rotores)(barrel & plunger)(gasket kit ) (nozzle assembly)( john deere pencil nozzle)bosch pump( delphi í»s common rails injectors) (injector assy)(nozzle holder)(cam plate )( ¿ªl¿ªment de pompe )(toberas ) (elementos) , Hongbeng diesel (cabezales) (zexel) , ( denso )(bosch diesel)(6110701687) (6110700587)
Split heat pump water heater All-in-one heat pump Air&solar type heat pump Ground source heat pump Swimming pool heat pump DC inverter heat pump Air to water heat pump central heating series Air to water heat pump hot water series.
Voltage++220V/50Hz 110V/60Hz Free Air Displacement++2 CFM 58 l/min 0.97 l/min 2.5 CFM 72 l/m 1.2 l/s Ultimate Vacuum: 5x10-1 Pa 25 Microns 0.033 mbar Motor: 1/3 HP Rotating Speed: 1440 r/min Intake Fitting: 1/4 SAE 1/2 Acme Oil Capacity: 300 ml Dimension: 340 x 130 x 312 mm New Weight: 11 kg.
NSQ submersible sludge pump is hydraulic machinery, the motor and the pump of which are coaxially submerged in medium to work. The overflowing parts of the pump are made from high alloy wear-resistant material, so the pump has good wear resistance and large flowing passage. It is applicable for conveying media such as sludge, ore slurry, coal slurry, sandstones containing big solid particles. The product is designed and manufactured by domestic and oversea advanced technologies. Besides the main impeller, the bottom of the pump is additionally provided with a set of agitation impeller which can spray the deposited sludge into turbulent flow, and therefore the pump realizes high-concentration conveying under the condition of no auxiliary device. The unique seal device can effectively balance the pressure inside and outside the oil chamber, so as to protect the reliability of the mechanical seal to the maximum extent. The motor adopts various protective measures such as overheat protection, water inle t detecting protection, and can operate safely for a long term in harsh working conditions. The pump is applicable for pumping sand for building, silty sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc. Structural Property 1.The whole machine is dry submersible pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities are effectively prevented from entering inner cavity of the motor. 2.Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out. 3.The trans-flux parts such as the impeller and the agitation impeller are made from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass. 4.The motor is submerged in water, is not limited by suction stroke, and has high sludge suction rate and thorough desilting. 5.The integral device is simplified, needs no auxiliary stirrer device or ejector device, and has simple and convenient operation and low total investment of the unit. 6.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium. Use Conditions 1 The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor. 2 The temperature of the medium cannot exceed 60íµ, and the medium does not contain inflammable or explosive gases. 3 The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%. 4 The submerged depth of the unit is not more than 20 meters, and the minimum submerged depth takes submerging of the motor as reference. 5 The unit works in the medium vertically, and the working status is continuous. Weight is 210KG.
Oee is a large mud pump, fluid end expendables and drilling wellhead tools manufacturer in china. We mainly manufacturer emsco f-500, f-800, f-1000, f-1300, f-1600, gardner denver pz-9 and national 12-p-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us. F series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small vallume and outstanding operation performance .It has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water efficiency and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe. F series pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operacation lifetime of powering part. The series pump is producted strictly according to api spec 7k"the equipment specification of well drilling and repairing" , and performed the ex-work test under the specification thereof.
Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance & repair. Technical specifications (1)type: horizontal triplex single acting piston pump. (2)rated input power 1000hp (3)rated speed: 130spm (4)stroke length 9"(228.6mm) (5)rated speed of pinion shaft 582 rpm (6)gear ratio: 4.48: 1 (7)valve standard: api7# (8)suction inlet 10" (9)discharge outlet 5 1/8" (5000psi) (10)overall dimension 205x94x100.5in (5200x2388x2550mm) (11)pump weight 44050 ib(20000kg)
Our plants are specialized in producing wide range of replacement parts for triplex mud pump(such as fluid end module, liner, piston, valve&seats, and a full line of module parts) for brand name mud pumps, including emsco, national, ideco, gardner denver, oillwell, opi wheatly, wilson, wirth, ellis willianms, skytop, brewster etc. All items are manufactured to api 7k quality standards. Module descriptions: Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1mpa), 7500psi(52.7mpa), and 10000psi(70.3mpa); discharge connections available on each side; suction connections on each side or front center. Material is 35crmoa or 40crmonn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of jb/tq252-81, and should be checked by grade3 after quenching the rough module will be rough processed, then the hull hardness is hb285-330.
2be series water ring vacuum pumps and compressors are the high efficiency energy saving products of our company. It is produced on the foundation of scientific research achievements and production experience for many years, and combined with the advanced technology of import products. It is usually used to pump the gases without small solid granules, and gases that doesn't dissolve in water, and noncorrosive gases, so as to form the vacuum and pressure in the closed container. By changing the structural material, it is also available in aspirating corrosive gas or using the corrosive liquid as the operating liquid. So it is used extensively in many trades such as papermaking, chemical industry, petrol chemical industry, light industry, pharmacy, foodstuff, metallurgy and construction materials, stone implement, coal washing, ore dressing and chemical fertilizer etc.. This series pump is single stage and single acting. It is simply structured and convenient to maintain. It is energy saving and can run stably.Compared with the widely used sk, 2sk and sz series water ring vacuum pump in china, the 2be series pump possesses the notable merits such as the high vacuum degree and the low power consumption etc.. And it is the ideal replacement product of sk, 2sk and sz series water ring type vacuum pump. 2be series water ring vacuum pump assembles with gas-water seperator and is easy to install, operate and maintain. 2.The meaning of model number Take 2bec-303-0 for example 2bec refers to single stage water ring vacuum pump series. 30 tells the the nominal semidiameter of the impeller is 30cm. 3 is the ratio code of the impeller width and diameter. We can easily see that the ratio is 1 according to the formula below. 1----b/d=0.5 2----b/d=0.75 3----b/d=1 5----b/d=1.2 The last number 0 stands for the min suction pressure is 33mbar.(when the number is 1, it refers to the min suction pressure is 160mbar).
Bvc series water ring vacuum pump and compressor is mainly used for sucking gases and water vapour. The ultimate suction pressure can reach 33mbar (97% vacuum). When working under suction pressure below 80mbar long time, it should be connected with cavitation resistant pipe. The suction pressure can reach 10mbar if assembling with an air ejector. As a compressor, the ultimate pressure can reach 0.26mpa. Characteristics: 1. Motor:inline, direct connection with the pump, saving space and easy to install. 2. Mechanical seal: no leakage and easy to maintain. 3. Firm performance and low noise (can be as low as 62 db(a)) 4. Bronze impeller improves the corrosion resistance; stainless steel vacuum pump can meet higher requirements for corrosion resistance. 5. Special flexible outlet design ensures no over-compressing and firm performance under design conditions.
Softwareshouse multiple pumps controller. Using this multiple pumps running time can be controlled by the user's setting. User's settings cannot be affected by the power interruption.It has additional features like digital clock, pumps running status and set time value display through lcd, clock setting, auto backlight on and off control etc.
application:shampoo,shower foam,had soap etc Dosage:1.9+0.3g for the first pump,3-4 times of pumping will work. multi-layer leakage-prevention design,for guarantee. many colors available for choice.
Application:shampoo,shower foam,had soap etc Dosage:1.9+0.3g For the first pump,3-4 times of pumping will work. Multi-layer leakage-prevention design,for guarantee. Many colors available for choice.
Application:shampoo, shower foam, had soap etc Dosage:1.9+0.3g For the first pump, 3-4 times of pumping will work. Multi-layer leakage-prevention design, for guarantee. Many colors available for choice.
Application:shampoo, shower foam, had soap etc Dosage:1.9+0.3g For the first pump, 3-4 times of pumping will work. Multi-layer leakage-prevention design, for guarantee. Many colors available for choice.
Application:shampoo,shower foam,had soap etc Dosage:1.9+0.3g For the first pump,3-4 times of pumping will work. Multi-layer leakage-prevention design,for guarantee. Many colors available for choice.
This pump is design in vertical type seal less Glandless pump with m
V&Hz 12V/24V DC Max.Current 15A/17A Max.Pump rate 40/60 l/min Max.Turn soon 1400rpm/2400rpm Dia.of pipe 3/4ís Length of cable 1.5m Package size 29í-19í-19cm Measurement 61í-31í-20cm/3pcs Weight approx 19.5kg/21kg QTY/20íSCTN 2079pcs. 61*32*21cm/3pcs
YSFP38-2 38w 1500l/h 24.5*18*15CM 51*38*32cm/8pcs 15.5/17kg 3688pcs/CTN YSFP55-2 55w 1800l/h 24.5*18*15CM 51*38*32cm/8pcs 16.5/18kg 3688pcs/CTN YSFP75-2 75w 4000l/h 30*18*20CM 38*32*42cm/4pcs 9.5/10.5kg 21600pcs/CTN YSFP100-2 100w 4800l/h 30*18*20CM 38*32*42cm/4pcs 10.5/11kg 2160pcs/CTN. 51*38*32cm/8pcs
We are trading house and working for government sector who are regularly importing vaccume pumps. As per standard.
