100% Polypropylene
MOC : SS316L, SS316, SS304, MS, PTFE Coating, MSRL Suitable Size : 5³ Long x 1 No. Cartridge to 40³ long x 250 Nos Cartridge Line Size : 1/4â?³ NB to 20â?³ NB Connection Type : BSP (F), NPT (F) Threaded, Flanged 150#, 300#, Table E, F Hydro Test Pre. : up to 100 kg/cm2 Flow Rate : 1000 m3/hr Cartridge Fitting : Pushfit, DOE, SOE, Code-7 Type : Jacketed / Non-Jacketed APPLICATION: Water Treatment Pharmaceuticals Refineries Chemicals Coolant filtration Solvent Other Liquid FEATURES: 100% Quality Guarantee Min. Pressure Drops High Flow Rate Single Base Material Easy to clean High dirt holding capacity Easy to installation
MOC : SS316L, SS316, SS304, MS, MSRL, PTFE LINING Suitable Size : 4³ x 10³, 4³ x 20³, 7³ x 17³, 7³ x 32³ ( 1,2,3,4,5,6,27 Nos. Bag) Line Size : 1â?³ NB to 40â?³ NB Connection Type : BSP(F), NPT(F) Thread, Flanged 150#, Table E, Table F Hydro Test Pre. : up to 100 kg/cm2 Flow Rate : 1500 m3/hr Design : Customised (as per your requirement) Type : Jacketed / Non-Jacketed APPLICATION: Water, DM Water, Waster Water Paints & Inks Solvent Oil Coolant Filtration Pharmaceuticals Process Chemicals Resins & Adhesive FEATURES: High Flow Rate High Dirt Holding Capacity Easy to Clean Easy to Operate Customized Design Various Type of Filter Bags High-Pressure Housings Low Maintenance
MOC : SS316L, SS316, SS304, MS, PP, UPVC Line Size : 1/4³ NB to 20³ NB Connection Type : BSP(F), NPT(F) Threads, Flanged 150#, Table E, Table F Hydro Test Pre. : upto 100 kg/cm2 Design : Customised (as per customerâ??s requirement) Valves : 3-Way Ball Valve, Butterfly Valve with Tee APPLICATION: Water, DM Water, Waster Water Paints & Inks Solvent Oil Coolant Filtration Pharmaceuticals Process Chemicals Resins & Adhesive FEATURES: High Flow Rate High Dirt Holding Capacity Easy to Clean Easy to Operate Customized Design Various Type of Filter Bags High Pressure Housings Low Maintenance
Pp spun cartridge filter , cotton yarn filter
Our resin trap filters can protect you from loss. Gradual loss of resin can go unnoticed, or it can be the disaster of accidentally delivering large amounts of resin to the production line. Bluslot's resin trap filter screen is designed and manufactured to meet your specific needs. Our flexibility in design creates many options. Customized services for various material products can be provided. Resin trap filter is used to install on existing and new filter bodies. To trap media and resin to prevent loss and prevent them from moving downstream. One end of the Resin trap filter is sealed by a stainless steel plate, and the other side has a flange. This design facilitates installation on equipment. It has continuous grooves and smooth surfaces. Resin collectors are usually made of corrosion-resistant stainless steel to avoid problems that often lead to accelerated corrosion. Johnson Wedge Wire Resin Trap Filter For Condensed Water Condensed water is radiant cooling on the surface of a surface or object, and condensed water on the surface of an object. Also in the industrial production process, the water is steam-cooled. In nuclear electric or pyroelectric condensed water treatment system, demand use resin trap. Resin particles that can be used and collected along with the water supply. After completing the use of the resin trap, use a specific cleaning device to clean it. Currently universally used resin trap strainer is a good finished work. Comprehensive main problems: Easy to stagnate, easy to rot, short service life. Our resin trap filter adopts special surface treatment process, more corrosion resistant. Possible to increase 35% service life. Resin Trap Filter For Wastewater Treatment Ion Exchange When using resin for online wastewater treatment, when the quality of the resin is poor (not strong enough), the water pressure disturbance is large (especially high pressure disturbance), and the resin cylinder wall is damaged, the resin will enter the entire water system. It will affect the normal operation of other equipment in the system, so a resin trap filter needs to be installed. The resin trap is mainly to install a filter screen with a pore size much smaller than that of the resin on the water system pipeline near the outlet of the ion exchanger and other equipment equipped with resin, and has a flushing function. When the resin passes, it can be intercepted and captured by the filter. At the same time, it is automatically rinsed through the differential pressure of the front and rear to discharge the captured resin out of the system. When using a filter to treat wastewater containing ion exchange resins (such as photovoltaic wastewater after ion adsorption), the filter may not completely treat the ion exchange resin or leak out. It will affect the normal operation of the subsequent equipment, cause the water terminal to contain ion exchange resin, and reduce the cleanliness of the water.
Model Number: UIYBSF247100A870T880NF Band Reject Frequency: 870 880MHz Pass Band Frequency: DC-860MHz 885 2500MHz Band Reject Rejection: 40dB VSWR:2.0 Insertion Loss: 2.0dB Power: 100W Connector Type: N-F Temperature:-20- 65
Type: Vehicle Oil Filters LM No. LMH-6615 Fits/Car Make: For HINO OEM No. 15601-78140 REF. No.: Materials: Durable Filter Paper Media, Long-lasting Plastic And Rubber,etc Size: Outer Diameter:20mm Inner Diameter:85.5/80.1mm Length:141.5/128mm Guarantee: 10000 KMS Certificate: ISO9001/TS16949 Shipping Port: Shenzhen or Guangzhou Port Packing: Neutral box or customized
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance. Alumina based light Sintered Magnesium aluminium Spinel Adopted unique wet technique, with the characteristics of high purity, low density, low thermal conductivity and high strength,it is mainly used in new ladle castables and large cement kilns. It is a new type of energy-saving and environmental protection material and can effectively save energy.
Short pass filter allow the shorter wavelength throught, and cut off the longer wavelength.These filter mainly used in Beauty equipment, police multiband testing instruments, strong light flashlight, stage lighting shade, four-wheel, iris recognition system, face recognition attendance device, optical instruments. Diameter:2mm to 200mm. Diameter Tolerance:+0.00/-0.1 or customer size Material:N-BK7,H-K9L,Sapphire,Fused Silica(JGS1),Caf2,ZnSe,Si,Ge,etc. Surface Quality:80-50 to 10/5 Flatness :1 lambda to 1/10 lambda Thickness Tolerance:+0.00/-0.05mm Standard wavelength:270nm,311 360 380 473 650 780 8081064 and 1900nm. Transmission:7.5 m: Tavg 90%, Tmin 80% 1.57.m: Tmax 3% Transmission:60% to 99% Average blocking 0.1%,0.01%,0.001%.0.001
Narrow bandpass filter allow small light through, the narrower ,the more pure of the light.Sunday is producing standars narrow bandpass filter �?�¯ï¿½?�¼?270nm,3113603804735326507808088509049401064.1900nm,these filter can be used in Biometric, touch screen, automobile four-wheel positioning, medical equipment, bar code scanning, the infrared camera, night-vision goggles, laser ranging, fingerprint identification, laser system.
Model Number: UIYBPF6038A Frequency range: 1700~2600MHz Insertion Loss: 1.0 dB VSWR:1.5 Rejection:40dB@1300MHz&3000MHz 60dB@1000MHz&4000MHz Power:50W Connector Type: N SMA Temperature: -40~+85â?? Dimension:60*38*14mm UHF Band Pass Filter Frequency range 130-3000MHz, from 1MHz to full bandwidth. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.
1.Matetial available: PE ,PP ,PPS ,P84 ,Arimade , PTFE. 2.Weight: 500g per sqm or other weight. 3.Finish Treament: singe,calendering,heat setting, water oil repellent, PTFE membrane . 4.Price: please consulte. 5.Size: to be customized.
1.Matetial available: PE ,PP ,PPS ,P84 ,Arimade , PTFE. 2.Weight: 500g per sqm or other weight. 3.Finish Treament: singe,calendering,heat setting, water oil repellent, PTFE membrane . 4.Price: please consulte. 5.Size: 120mm*2000mm,130mm*3000mm,150mm*4000mm,160mm*6000mm.and other size to be customized.
Model Number:UIYBPF125125A Frequency Range:300~500MHz Insertion Loss:0.5dB VSWR:1.22 Rejection:60dB@Fc�±20MHz Connector Type N SMA Power:100W High RF performance, ultra-competitive price. Military, space and commercial applications. Custom design available upon request. Guaranteed for one year standard.
Ceramic filter is a new type, high efficiency, energy saving solid-liquid separation equipment, integration of electromechanical, automatic control, ultrasonic cleaning, micro-porous materials and other high-tech in one. Ceramic filter prominent features are: high efficiency, energy saving, good filtering effect, high degree of automation, low running cost, comprehensive utilization of filtrate, cake drying and moisture is adjustable, the filter medium strong adaptability, is widely used in non-ferrous industry, chemical industry, mining, metallurgy and environmental protection, sewage treatment, medicine, food, coal and other industries.
IR filter, 8H scratch-resistant, customized to fit requested spectrum.
UV-Cut filter, block UVA & UVB, available in screen protector, anti-shattering film or front cover.
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance.
Sintered Mullite Sintered Mullite is made of high-quality bauxite, by multistage homogenization and sintering above 1750 C. It has the characteristics of high density, stable quality, good thermal shock stability, small high temperature creep value and good chemical corrosion resistance. It is an ideal raw material for the production of various shaped and unshaped refractory materials, high-grade sanitary ware embryo, precision casting model and other refractory products. Index Type Chemical Composition % Al2O3 SiO2 Fe2O3 BDg/cm3 Water absorption% M60 58-62 32-36 1.5 2.7 2.0 M70 68-72 22-26 .5 2.8 1.5 M80 76-80 14-18 1.5 2.9 1.5 High quality Sintered Mullite is produced by our company's special process. Compared with ordinary mullite, it has the characteristics of low impurity, high mullite phase content, good thermal vibration stability and long service life. It is the ideal replacement product of ordinary mullite. It can be widely used in steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
