PP filter element is made of ultrafine polypropylene fiber film, without any cement, no leakage, no secondary pollution.
PP Sediment filter : Polypropylene replacement, cartridge for removal of : Sand, Silt, Dirt and Rust Particles.
For water use only. This cartridge fits most standard in-Line Filter Housing. Maximum Water temperature 52.Micron rating is nominal. Installation and housing design can affect performance. This filter will not remove cysts, bacteria or viruses.
Anchor Catalyst Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust, and SO2, HCL, NOx, and Dioxins at the same time. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
10. Multi-Pollutant Control - Control PM, SO2, HCl, NOx, Dioxins, HAPS With One Single System
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000�°C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
3540 Industrial Filters Suppliers
Short on time? Let Industrial Filters sellers contact you.
Barrel Series CARBON Filter cartridges
Barrel Series carbon filter cartridges have many applications. Our Mission is always to get rid of odors or harmful gases in the air inlet and / or outlet. Our carbon filter cartridges are successfully applied: airports, clean rooms, hospitals, data center, industrial kitchens, farm, museums, archives, and offices. In industry it is often a question of ridding the exhaust air of harmful gases. The Environmental Nuisance Act is often in force for these types of applications
Well operating P Series gas coalesce filters are designed with numerous layers and inside to outside flow track for improved performance. The filter cartridges are made with central hole closed end for drip â?? free mounting and BUnaN gasket completes the open end, The modern pleating filtration technology distinguishes the product with its efficiency in meeting the requirements
APPLICATIONS
Process water (POE)
Pre-filters for reverse osmosis (RO)
Chemical products
Pool filters
Wastewater treatment
Cooling towers
Food & Beverage
Oil/Gas
Paint/Inks
Cosmetics
Clean series absolute ratting filters
The clean series melt-blown absolute filter cartridges are designed with extruded different density layers of polypropylene fibers. The unique PLC control technology sufficiently turning up the filtration efficiency level 99.98% for particle sizes encoded in the identification markings. The cartridges have two layers of fibres wound on a polypropylene core. The outer layer is equal to pre-filter and the inner layer qualified as a final filter to be the best from appearance to applications.
Pellicle Series Needle Felt Filter bag
Needled felt is the most common media used in economic disposable bag filters. Its fibres are locked together when they pass through beds of special barbed needles, entangling them into a strong matrix. The down stream side is signed using a special heat process to eliminate fiber migration. This rugged media is ideal for fabrication by both sewing and welding.Available in a wide range of materials, needled feits can be used in a vast range of liquids and gases of low to medium viscosity. They can be applied to remove hard partcles or, in some cases, soft partcles and jels. Kfilter offers needled felts in PO, PE, PA and PTFE in the full range of bag sizes.
PTFE filter bag is made of 100%PTFE without adding any other raw materials and additives, which does not change the original characteristics of PTFE. Therefore, the filter bag has the characteristics of high temperature resistance, strong acid and alkali resistance, good friction resistance, difficult combustion and good insulation.Our company adopts the international advanced double-layer interlock sealing sewing bag making structure, this kind of stitching structure does not take off the thread, the press cloth itself is not smooth, does not deform, the structure is stable, the strength is high, the service life of the filter bag is effectively extended. In addition, the increase in the amount of cloth increases the thickness. The penetration ability of dust from the suture is almost zero, which can ensure the discharge reaches the standard value, Widely used in incineration dust collection, chemical dust removal and other harsh working conditions.
"Being used in filtration of liquids and lubricants at high pressure.
Operating pressure: Max. 420 bar
Operating temperature: -25~120
Setting pressure of clogging indicator: 5 bar
Bypass valve cracking pressure: 6bar
Filter housing material: ductile iron
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil(resin-impregnated paper only for mineral oil)"
"The screw-in design of this product enables quick and simple flipchart to be changed without using special tools and provides a larger traditional ink cartridge style flipchart that is free from contamination during use. These fragments combine our best technology to treat all fuels and lubricants in all operating environments. Epoxy resin is used in metal plate structure. Enhance compatibility. Electronic coatings provide maximum corrosion resistance and epoxy adhesion. Fluororubber O-rings provide reliable sealing and maximum compatibility.
Features: efficient and most advanced media and design; Unparalleled flight efficiency; Cleaning the target ISO cleanliness in one cleaning; Modular design can solve the following problems: Almost any speed or level of use; Convenient and fast service "
3540 Industrial Filters Suppliers
Short on time? Let Industrial Filters sellers contact you.
