Features : Soft flow,Wood flour filled Phenolic Moulding Powder with good surface & mechanical
and electrical properties,suitable for Injection Moulding & Transfer Moulding.
Colour : Black
Applications : Appliances
Properties Test Method Typical Value
Appearance - Black
Apparent Density ISO 60 0.65 g/cm3
Specific Gravity ISO 183 1.40
Tensile Strength ISO 527-1/2 52 MPa
Flexural Strength ISO 178 85 MPa
Compressive Strength ISO 604 200 MPa
Charpy Impact Strength(notched) ISO 179 1.80 KJ/m2
Deflection Temperature , 8 Mpa ISO 75 1300
C
Surface Resistivity IEC 60093 1.00E+10.5 Ohm
Volume Resistivity IEC 60093 1.00E+11.5Ohm.cm
Di Electric Strength IEC 60243 8.00 Kv/mm
Proof Tracking Index IEC 60112 130 V
Water Absorption ISO 62 55 mg
Shelf Life - 6 months
Features : Straight Phenol Formaldehyde Resin with Cream to Pink Colour, in Free
Flowing Powder Form.
Colour : Cream
Applications : Automotives, Industrial, Machine Tools, Motors, Power Tools.
Components : Grinding Wheels and Abrasives.
Properties Typical Value
Appearance Cream To Pink Colour
Melting Point 950 C
Norton Flow @ 1250 C 57 mm
GEL Time @ 1600 C 45 seconds
Hexamine Content 8%
Sieve Analysis + 200# 1%
Shelf Life @ 250 C 6 months
Parameter Standard Specification
Appearance Crystalline Free Flowing Flakes
Colour White
Para Dichloro Benzene % area (By GC) 99.80% Min
Other Chloro Benzene % area (By GC) 0.20% Max
Solidifying Point 52.80 C
Boiling Point 1740 C
Flash Point 65.50 C
Moisture 0.03% Max
Solubility Insoluble In Water & Soluble In Alcohol,
Benzene & Ether
Molecular Formula C8H9ClO
Molecular Weight 156.61
CAS No. 88-04-0
Description White Or Creamy White Crystals Or Crystalline
Powder,Characteristic Odour, Volatile In Steam
Solubility Insoluble In Water, Soluble In Methanol,
Acetone,& Alkali Solution
Related Impurities
Total 1.5 % max.
3,5 Dimethyl Phenol <0.2 %,
Dichloro Dimethylphenol <0.5 %,
2 Chloro 3,5 Dimethyl Phenol <0.2%
All Other Impurities max. 1.0 %
Identification 1) Infra Red Absorption Spectrum
2) Melting Point 1140 C TO 1160 C
Standards C8H9ClO Content In Chloroxylenol, NLT 98.5%
Residue On Ignition Not More Than 0.1 %
Water By KF Not More Than 0.5 %
Iron Content 100 ppm max.
Assay By GC Not Less Than 98.5 %
INTRODUCTION
The product is a high molecular 30 TBN Calcium Sulphonate. The increased oil solubility of the organic portion of this Sulphonate enables the product to provide rust protection and acts as a dispersant for graphite and molybdenum disulfide. It can be used as an additive in lubricating oils, greases, rust inhibition, antiwear and hydraulic fluids.
SPECIFICATION
Test Method Minimum Maximum
Appearance Visual Brown liquid Brown liquid
Colour ASTM D 1500 2 5
Sp. Gravity @ 15.6 C ASTM D 1298 0.95 1.05
Flash Point C (COC) ASTM D 92 175 -
Viscosity @ 100 C, cst ASTM D 445 40 70
Avg. Molecular wt. ASTM D 3712 1000 1100
TBN (mg KOH/gm) ASTM D 974 28 35
Calcium Content %[w/w] GL EDTA 1A 2.8 3.0
FORMULATION
The product is recommended for use at 0.5% to10.0%wt. In suitable base stocks to provide
detergency & anti-rust performance characteristics to oils. It is compatible with mineral base oils, white oils, and synthetic base stocks.
APPLICATION
Imparts excellent rust prevention, detergency and Anti oxidant Properties.
Corrosion inhibitor in mill oils, short-term rust preventatives, coatings and greases.
Dispersant and corrosion inhibitor in engine oil.
Provides excellent resistance to coated Cold Rolled Steel for antirust applications.
Works in extremely hostile conditions like highly acidic environment as well as highly humid atmosphere.
It is non-staining having detergent, dispersant properties.
Environmental Friendly, Biodegradable without side effect.
HANDLING AND STORAGE
Calcium Sulphonate is normally handled at room temperature. For general purposes, the following storage and handling temperatures are recommended: Storage Handling 50-70C
(122-158F).
For more extensive information on the safe handling and use of this product, see the Material
Safety Data
Supplier From
Jakarta Timur,
DKI Jakarta,
Indonesia
Chemical product such as degreaser, anti rust, paint remover, metal protector, quick penetrating oil. floor cleaner, hand soap, body wash, car wash soap/shampoo, hand sanitizer.
we also have bath towel, towel and shoes
for commodity product we sell cocoa, chocolate, coconut, coconut bricked, etc.
Sodium Sulphite is a Wheat-brown to brown colored powder with a slight cresylic Oduor. It is using in textile & Paper industries as well. It is available in 50kg HDPE bags and 1250kgs jumbo bags.
Ferric chloride anhydrous is in Greenish Black Iridescent crystalline powder form. It is extremely hygroscopic becoming orange colored on hydration. Ferric chloride as F3CL3 is 98% Minimum. This is basically water treatment chemical.
Maltodextrin is packed in 25kgs HDPE PP bags with brand name. It is being used in various food application as well. We are loading 27MT in 40DV container.
ELTEE DMCC is the Largest Supplier of High Quality Potassium Sulphate in world. Potassium Sulphate is a concentrated potassium and sulphur fertiliser and specially suited for mechanical spreading as well as manual applications. It is worldâ??s most popular fertilizer combining Potassium and Sulphur. Potassium Sulphate offers a high concentration of nutrients readily available in plants.
The specifications are as follows :
K20 : 51% min
Chloride : 1% max
Moisture : 0.5% max
Sulphur : 18% min
PH value(1% Solution) 2-3
Insoluble matter : 0.3% Max
Sodium : 0.4% max
Na as Nacl : 1.1% Max
Physical appearance : White powder
Uses :
* Improves fruits quality , shelf life and increases plant drought resistance
* Limit vegetative growth as of fruit setting
* Developed for fertigation inn open field and green houses. Also suitable for foliar applications.
Packing :
* 25 Kg PP bags with PE Liner inside (we also make customised bags as per buyerâ??s requirement )
* 1000 Kg Jumbo bags
Payment Terms :
* L/C at sight or TT
Delivery Time :
* Within 20 days from the date of signing contract
26954 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
