Physicals: SIBX-sodium isobutyl xanthate is Slight yellow or yellow free flowing powder or pellet,with strong ordour, soluble in water.
Sodium butyl xanthoxanthate is a flotation reagent with strong collecting ability. It is widely used in the mixed flotation of various non-ferrous sulfide ores. The product is especially suitable for the flotation of chalcopyrite, sphalerite and pyrite. Under certain conditions, it can be used to preferentially flotation copper sulfide from iron sulfide ore, and it can also be used to collect sphalerite activated by copper sulfate.
Sodiumethyl xanthate is a collector with better selectivity, widely applied in flotation of Cu/Zn/Ne and pyrite, especially for the gold floatation in gold and copper mine. It could make good result in the copper and lead oxidized ore . Normally used in rough selecting and scavenging.Butyl xanthate.
Xanthate Physicals Slight yellow or yellow free flowing powder or pellet with strong ordour soluble in water decomposing easily when meeting heat Specification PelletPowder Items Grade Items Grade Apperance Yellow apperance Yellow Active component 90 Active component 85 Free Alkali02 Free Alkali02 MoistureVolatile40 MoistureVolatile 40 Solubility Soluble in water with no impurity Solubility Soluble in water with no impurity
Product alias: polyiron, SPFS Product appearance: yellow or reddish brown powder Solid production capacity: 60,000 tons/year Production process: spray drying method Packing specification: woven bag packing, 25KG/bag Ferric sulfate is an excellent water purification agent, with good flocculation and adsorption, widely used in source water, drinking water, tap water, industrial water, domestic sewage treatment.Poly ferric sulfate has the following characteristics: low dosage;fast flocculation, large alum, rapid sedimentation;it can decolorize, sterilize, remove radioactive elements, reduce heavy metal ions, and reduce COD and BOD.It is the best cationic inorganic polymer flocculant.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50% Synonyms : PBTCA 50% M.F.: C7H11O9PCAS No.: 37971-36-1 Performance Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment. Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +. The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions. It allows coolingwater concentration factor increased to seven or more.
Aluminium photosphate white rhombic crystal or powder. Relative density 2.566. Melting point>1500 C. Insoluble in water, soluble in concentrated hydro chlori acid, concentrated acid, alkali, and alcohol. At 580 C, the Chemicalbook is relatively stable, and at 1400 C, it does not melt and becomes a colloidal substance. Between room temperature and 1200 C, aluminum phosphate has four crystal forms, commonly known as Type.
Potassium hydroxide, is a kind of inorganic compound, chemical formula KOH, melting point 361, boiling point 1320, potassium hydroxide commonly known as caustic potassium, potassium ash, etc., industrial products are mainly in two forms, respectively solid and liquid, of which solid is white or light gray sheet, block rod, chemical properties and sodium hydroxide similar, has a strong alkaline and corrosive, Easily soluble in water and will release a lot of heat, and delixing, easy to absorb moisture in the air and delixing, absorb carbon dioxide into potassium carbonate. Mainly used in leather, paper, printing and dyeing, sewage treatment and other fields; Food grade potassium hydroxide is mainly used in pharmaceutical intermediates, various potassium salts, food additive ingredients, food processing containers cleaning, disinfection and other fields.
Physical and chemical properties CAS NO:67-48-1 Structural formula: HOCH2CH2N (CH3) 3Cl Molecular formula: C5H14ClNO Molecular weight: 139.63 Content (%): 50%, 60%, 98% Melting point (�ºC): 302 ~ 305 (decomposition) Toxicity LD50 (mg/kg): rat, 6640 by mouth character White hygroscopic crystal, tasteless, with fishy smell. Mp240�ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. Solubility: easily soluble in water and alcohols, almost neutral in water solution, insoluble in ether, petroleum ether, benzene and carbon disulfide. Slightly fishy, salty and bitter, easy to deliquescence, unstable in alkaline solution. Choline chloride is an organic substance with the chemical formula of C5H14ClNO. It is a white hygroscopic crystal, tasteless, and has a fishy smell. The melting point is 305 �ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. This product is easily soluble in water and ethanol, but insoluble in ether, petroleum ether, benzene and carbon disulfide. Low toxicity, LD50 (rat, oral) 3400 mg/kg. It is used to treat fatty liver and liver cirrhosis. It can also be used as a feed additive for livestock, which can stimulate the ovary to produce more eggs, litter and gain weight of livestock and fish.
Eusolex 9020 Sunscreen Avobenzone Cas 70356-09-1 Product Name Avobenzone CAS 70356-09-1 Purity 99% Appearance white powder MOQ 10g Melting point 81-84 C Boiling point 463.6±35.0 C(Predicted) Density 1.079 Flash point / Refractive index Usage organic synthesis intermediates Storage conditions Inert atmosphere,Room Temperature
Benzophenone is a colorless prismatic crystal with sweet taste and rose fragrance. It has a melting point of 47-49C, a relative density of 1.1146, and a refractive index of 1.6077. It is soluble in organic solvents and monomers such as ethanol, ether and chlor form, but insoluble in water. It is a free radical photoinitiator, mainly used in free radical UV curing systems, such as coatings, inks, adhesives, etc. It is also an intermediate for organic pigments and fragrances. This product is also a styrene polymerization inhibitor and a fragrance fixer, which can impart a sweet smell to the fragrance, and is widely used in perfume and soap flavors. During storage and transportation, the product should be protected from moisture, sun, and away from heat sources, and its temperature should not exceed 45C.
Citric Acid Citric Acid (CA for short, also known as citric acid) is an important organic acid, colorless crystal appearance, odorless, easily soluble in water. According to its different water content, it is divided into monohydrate citric acid and anhydrous citric acid. The calcium salt of citric acid is easily dissolved in cold water than in hot water, this property is commonly used to identify and separate citric acid, and anhydrous citric acid can be obtained by controlling the appropriate temperature when crystallizing, which has many uses in industry, food industry, cosmetic industry, etc.
Antimony trioxide Sb2O3 CAS 1309-64-4 Antimony trioxide mostly used as synesis which with halogen flame retardant in most of polymer materials compounding. It is also can be used as clarifier additive inside glass making. And used for ceramic glaze and pigment & coating. Main application: The product is mainly applied to the industries of plastics, rubber, chemical fiber, paint, enamel, pigments, glass and electronics. Physical and chemical indicators and its characters: the main content is between 98.00-99.90 percent and it also can be produced according to the requirements of customers. And the average particle size can be determined according to the requirements of customers.1. Used as a fire retardant in the membranes of plastic industry, the enclosures of electric devices and household electric
Raw materials for special dyes and functional dyes, such as raw materials for the synthesis of hair dyes and liquid crystal dyes.
DOTP has good electrical and thermal resistance. It can replace DOP in PVC plastic electric wire sheath, and can also be used in the production of artificial leather film. In addition, it has excellent compatibility and can also be used for plasticization of acry lonitril derivatives, polyvinyl butyral, nitrile rubber, nitr cellulose, and the like.And it plays a role in improving the hardness and deformability of the product, and can be used as a softener in products such as nitrile rubber, neoprene rubber, EPDM rubber and the like. It is especially used in cable materials with good plasticizing effect and low volatility. It is widely used in various products requiring heat resistance and high insulation. It is an ideal plasticizing for producing temperature-resistant 70C cable materials and other volatile PVC products Agent.
Propyle ne glycol 1.Stable quality 2. Leading ISO Manufacturer and Supplier 3.Purity Min 99.5% 4. Colorless, odorless viscous liquid
What is Oligopeptide-10?Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acne bacteria. Oligopeptide-10 is A short bioactive peptide consisting of fifteen naturally occurring amino acids that provides anti-microbial activity against p-acne bacterium. Oligopeptide-10 has potent activity against Propionibacterium acnes causing rapid cell death. It binds to negatively charged surface elements (lipoteichoic acids) of bacteria enabling access to its primary target, the cytoplasmic membrane which causes a lethal osmotic imbalance within the bacteria. Due to this unique mechanical mechanism of action bacteria have a very low probability of becoming resistant and bacteria resistant to other antibiotics remain susceptible to Oligopeptide-10. In addition, it neutralizes pro-inflammatory bacterial components, reducing redness. In independent studies Oligopeptide-10 has been shown to be non-cytotoxic, non-mutagenic, non-irritating and non-sensitizing.Used in many acne products to enhance natural defense systems, Oligopeptide-10 is an anti-microbial peptide derived from plant amino acids that is highly synergistic with salicylic acid. Studies have demonstrated that Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acnes bacteria. Clinical studies have shown a significant reduction in the appearance of blemishes and red, blotchy spots after using products with Oligopeptide-10.
SYN-AKE acts as an effective anti-wrinkle active product mainly by relaxing facial muscles. SYN-AKE acts on the postsynaptic membrane and is a reversible antagonist of muscle nicotinic acetylcholine receptors. SYN-AKE binds to subunits of nicotinic acetylcholine receptors, thereby blocking the binding of acetylcholine to the receptor, resulting in persistent receptor blockade. In the closed state, sodium ions cannot be ingested, cannot be depolarized, and nerve excitation transmission is blocked, so the muscles at the wrinkles are relaxed, thereby reducing wrinkles, and at the same time increasing the moisture and nutrition of the skin to protect the skin in an all-round way.
CAS 81646-13-1 BTMS 50 is white flakes, soluble in water and ethanol, has good compatibility with cationic and non-ionic surfactants, and is stable below 100 C.Good chemical stability, heat resistance, light resistance, pressure resistance, strong acid and alkali  resistance. It hasexcellent thickening, emulsifying and softening properties. This product is used in hair care and shampoo products: conditioners, ointments, shampoos and other hair products softeners.
Raw Material: Dichloromethane (Methylene Chloride) Dichloromethane, also known as DCM, methylene chloride, or methylene bichloride, is an organic compound commonly used as a solvent in various industrial applications. Chemical Properties: Chemical Formula: CHCl CAS Number: 75-09-2 Appearance: Colorless, transparent liquid Odor: Irritating ether-like odor with a sweet, chloroform-like scent Solubility: Dichloromethane is slightly soluble in water and fully soluble in ethanol and ether. It exhibits low polarity and is miscible with many organic solvents, making it versatile for various applications. Physical Properties: Under normal usage conditions, dichloromethane is a non-flammable, low-boiling solvent. It serves as an effective replacement for flammable solvents such as petroleum ether and ether, particularly in environments where safety is a concern. However, caution is advised when vapor concentrations become elevated, especially in high-temperature air.
