High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Alkyl Dimthyl Amine Oxide 1. It is fatty tertiary amine oxide, in acid medium was cationic, and in alkaline medium was nonionic. 2. It has excellent thickening, antistatic, soft, decontamination and Increasingfoam performance. 3. For low irritant performance, which not only can effectively reduce the anionic detergent irritant, but also has a bactericidal, Ca-soap dispersion, vulnerability to biological degradation and so on.
Saline AHB1324 (0.9% Sodium Chloride) - US BAXTER HEALTH IV Bag of 0.9% Sodium Chloride (Normal Saline Solution) Injection Available in 50mL, 100mL, 250mL, 500mL, 1000mL New, Sterile, Sealed, & Medical Grade No Prescription Required!
Diphenylmethane diisocyanate, or "MDI" for short, is a white to pale yellow molten solid, containing 4,4 '-diphenylmethane diisocyanate, 2,4' -diphenylmethane diisocyanate, 2,2 '-diphenylmethane diisocyanate, and other isomers. Is the aromatics downstream main products, widely used in polyurethane elastomers, synthetic fiber, artificial leather, solvent-free coatings and other polyurethane materials production field.
Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
This product is a non-ionic high efficiency thickener and a naturally derived glucoside product. It is very mild and non-irritating; it has excellent thickening property and is an extremely efficient thickener for surfactant system formulations; it has good compatibility with various surfactant systems and does not reduce the foam height; it has excellent synergy, and has a good compounding and thickening effect with AOS, AES sodium salt, sulfosuccinate salt and amphoteric surfactant, without jelly feeling. It is very suitable for cleaning products, such as hair shampoo, body wash, facial cleansing products, baby shampoo and so on.
INCI: Alkyl Acrylate Crosspolymer Carbomer Carbopol N2 Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream. High viscosity formulation: THEMAX N1 Low viscosity formulation: THEMAX N2 Recommend Dosage: 0.1-0.4% Features: Emulsify a variety of oils and grease Excellent emulsion stability Suitable for a cold mix process
Ortho Xylene also referred to as O-Xylene is an aromatic hydrocarbon and its formula is C6H4(CH3)2. It is one of the constituents of the three isomers of xylene, namely p-xylene and m-xylene. Concentration: 99 - 100% Physical State: Liquid Odor: Aromatic Appearance Colorless
Factory price 98% 99% Mixed xylene for Industrial and Agriculture Grade C8H10 CAS 1330-20-7 CAS No.: 1330-20-7 Chemical Formula: CH Description: Xylene is a colorless, transparent liquid with a pungent, characteristic odor. It is a flammable substance that can easily mix with ethanol, ether, and various other organic solvents, but is insoluble in water. Xylene is composed of three isomers: 45% to 70% m-xylene, 15% to 25% p-xylene, and 10% to 15% o-xylene. It has a boiling point range of 137140C and is commonly used in the production of petrochemicals, paints, coatings, and solvents. Specifications: CH Content: Grade I: 99% min Grade II: 99% min Chroma: Grade I: 10 max Grade II: 20 max Evaporation Residue: Grade I: 0.001% max Grade II: 0.002% max Acidity (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Alkali (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Sulfur (S) Content: Grade I: 0.003% max Grade II: 0.005% max Benzene Content: Grade I: 0.1% max Grade II: 0.2% max Toluene Content: Grade I: 0.1% max Grade II: 0.5% max Ethylbenzene Content: Grade I: 19% max Grade II: 24% max Water Content (Hâ??O): Grade I: 0.03% max Grade II: 0.06% max
Melamine Cyanurate used for V-0 grade nylon(PA66 and PA6) and glass fiber reinforced nylon flame retardancy Category: Flame Retardant Powder Tags: Film Grade, Masterbatch, Polyester Chips, Textile Grade Classification: Inorganic Flame Retardant CAS No.: 68333-79-9 Product Description: Melamine Cyanurate (MC) is a halogen-free flame retardant commonly used in unfilled polyamide (PA) products. It provides exceptional flame retardancy, achieving the UL 94 V0 flame retardant rating in materials such as nylon PA66 and PA6. MC is recognized for its unique crystal structure and excellent dispersibility, making it highly suitable for various polymer applications. Key Applications: Flame Retardancy: PA6, PA66 (nylon) PBT, PET TPE, EVA, PE Silicone Rubber, Epoxy Resin Rubber Products MC is an effective solution for enhancing the flame retardant properties of these materials, ensuring both safety and performance in a wide range of industrial applications.
Product Name: Diethylene Glycol (DEG) CAS No.: 111-46-6 Molecular Formula: CHO Molecular Weight: 106.12 g/mol EINECS No.: 203-872-2 Physical Properties: Melting Point: 10C (lit.) Boiling Point: 245C (lit.) Density: 1.118 g/mL at 25C (lit.) Appearance: Colorless liquid Purity: 99% Applications: Diethylene Glycol (DEG) is widely used in the manufacturing of plasticizers and serves as a key component in various industrial applications, including: Extractant Desiccant Insulation agent Softener Solvent
High Quality Mono Ethylene Glycol /Ethylene Glycol Price CAS 107-21-1 Molecular Formula: CHO Density: About 1.11 g/cm Boiling Point: 197 C Melting Point: -13 C Purity: Typically >99.5% for industrial applications
Ethylene Glycol is an important organic compound with the chemical formula CHO, commonly known as ethane-1,2-diol. It is a colorless, odorless, and sweet-tasting viscous liquid. Due to its unique properties, ethylene glycol is widely utilized across various industries. Key Properties: Boiling Point: Approximately 197.3 C (388.1 F) Melting Point: -12.9 C (8.8 F) Density: About 1.11 g/cm
Naphthalene Dicarboxylate (NDC) Naphthalene Dicarboxylate (NDC) is a specialized chemical compound utilized primarily in the production of advanced polyesters and resins. It plays a crucial role in manufacturing high-performance items such as: LCD Flat Panel Displays: NDC enhances the properties of materials used in screens, contributing to better display quality and durability. Ultra-Thin Data Storage Tapes: The compound is key in producing data storage solutions that require thin, flexible materials without compromising performance. NDC is part of IVL's High-Value Added (HVA) product portfolio, highlighting its importance in innovative applications across various industries, including electronics and data storage.
Purified Terephthalic Acid (PTA) Purified Terephthalic Acid (PTA) is a key organic compound formed through the reaction of paraxylene (PX), a secondary petroleum product, with acetic acid. PTA is primarily used in the production of Polyethylene Terephthalate (PET), a widely utilized polyester. During polymerization, PTA is combined with other chemicals to produce PET, which appears as a white crystalline powder. Key Characteristics: Safety: PTA is considered to be non-toxic and is classified as flammable, with the potential to ignite in the presence of sufficient air. Applications: As a crucial organic raw material, PTA finds extensive use in various industries, including: Chemical Fiber Industry: Essential for producing synthetic fibers. Light Industry: Used in a variety of consumer products. Electronics Industry: Integral in the manufacturing of electronic components. Construction Industry: Utilized in various construction materials and applications.
Paraxylene (PX) is an important aromatic hydrocarbon with various industrial applications, primarily in the production of purified terephthalic acid (PTA), which is a key precursor for polyester fibers and polyethylene terephthalate (PET). Here are some of its notable properties and uses: Properties of Paraxylene: Melting Point: 12-13 C Boiling Point: 138 C Density: 0.861 g/mL at 20 C Vapor Density: 3.7 (compared to air) Vapor Pressure: 9 mm Hg at 20 C Refractive Index: n20/D 1.495 Flash Point: 77 F Storage Temperature: Recommended at +5C to +30C Solubility: Slightly soluble in water (0.2 g/L) Appearance: Colorless liquid pKa: >15. Applications: PTA Production: Approximately 65% of PTA produced is used to manufacture polyester fibers, which are widely used in clothing and textiles. PET Bottles: About 30% of PTA is converted into PET, commonly used for beverage bottles and packaging. Plastic Products: The remaining 5% is utilized in various plastic products, including films and food containers
Perchloroethylene, commonly known as PERC or tetrachloroethylene, is a versatile solvent widely utilized across multiple industries. It is particularly renowned for its applications in dry cleaning operations and metal manufacturing, where it serves as an effective cleaner and degreaser. Chemical Properties: Other Names: PERC, PCE, and tetrachloroethylene CAS Number: 127-18-4 Chemical Formula: C2Cl4 Appearance: Colorless, non-flammable liquid Odor: Sweet, ether-like aroma Key Applications: Dry Cleaning Clothes: PERC is primarily used as a solvent in the dry cleaning industry, effectively removing stains and dirt from fabrics. Degreasing and Cleaning Metal Parts: In metal manufacturing, perchloroethylene is employed to degrease and clean metal components, ensuring optimal performance and quality. Finishing Product for Textiles: It is used as a finishing agent in the textile industry, enhancing the appearance and durability of fabrics. Oil and Fat Extraction: PERC is also utilized in the extraction of oils and fats, making it valuable in various food processing applications. Intermediate in Synthesis: Perchloroethylene serves as an intermediate in chemical synthesis, playing a crucial role in the production of various chemical compounds.
ABC Dry Powder Fire Extinguishers utilize mono ammonium phosphate-based dry chemical powders, designed for multipurpose use on Class A, B, and C fires. Available in concentrations of 40% and 90%, these extinguishing agents are SABS approved, ensuring reliability and effectiveness. Applications: Class A Fires: The dry chemical powder insulates Class A fires by melting at approximately 350-400 degrees Fahrenheit. Class A fires typically involve common combustible materials such as wood, paper, or trash. Class B Fires: For Class B fires, the powder effectively interrupts the chain reaction by forming a coating on the burning surface. Class B fires involve flammable liquids or gases, including gasoline, oil, propane, and natural gas. Class C Fires: ABC dry powder is safe and effective for Class C fires, as it is a non-conductor of electricity. Class C fires typically involve live electrical equipment, which requires extinguishing agents that do not conduct electricity, unlike water. It's important to note that electricity can also cause Class A and B fires. Inappropriate Uses: ABC dry chemical powder should not be used on chlorine or oxidizer fires, as the resulting chemical reaction can lead to explosions or the release of toxic gases. Water is recommended for these situations. Additionally, it is ineffective for certain metal fires (Class D) and cooking oil fires (Class K). Due to the corrosive nature of ABC dry chemical powder, it is not advisable to use it around aircraft or sensitive equipment.
Cosmetic: PVP-K series can be used as film-forming agent, viscosity-enhancing agent, lubricator and adhesive in hair sprays, mouses, hair-fixing gels and colution. They are also useful auxiliary materials in skin-care product, hair-dying reagent, shapoo, lipstick, deodorant, sunscreen and dentifrice. Pharmaceutical: PVP-K30 (pharmaceutical grade) is a kind of new excellent pharmaceutical excipient. It is mainly used as binder for tablet and granule, dissovlving assistant for injection, flow assistant for capsule, dispersant for liquid medicine and pigment, stabilizer for enzyme and heat-sensitive drug, co-precipitant for poorly soluble drugs, lubricator and antitoxic assistant for eye drug. PVP has been used as excipient in more than one hundred drugs. Other Utility: Suspensant, dispersant and emulsifier disinfector Paint and coating Printing ink Textile and dyestuff Building material Paper making TV kinescope Polymer ultra-filtration membrance, micro-filtration membrance Glass fiber
Quick details for (R)-(+)-1-Phenylethylamine CAS: 3886-69-9 Molecular Fomula:C8H11N Molecular Weight:121.18 Appearance: Colorless transparent liquid Purity: 99%
Product Name: Potassium Laurate CAS NO.:10124-65-9 MF: C12H23KO2 Appearance: Colorless liquid Usage: Washing products Package: 20kg/drum HS Code: 3402900090 Potassium laurate can be used as emulsifier and foaming agent in industry. Main ingredient in body wash and hand sanitizer. For liquid laundry soap, it has good detergency and makes clothes easier to rinse. Emulsifier in disinfectant.
