Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 220/50 Rated Electric Current(A) 2.8/4.8 Fan Type: Axle Discharge Type : up discharge Controller Type : Intelligent LCD Motor Type: Single-phase Various Frequency Speed Unit Size(mm):1080í-1080í-980
The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Parameter specification: Airflow(m3/h):18000 Power(Kw) :1.1 Voltage/Frequency(V/Hz) :380/50 Fan Type:Axle Motor Type:Three-phase Fixed Speed Controller Type :Intelligent LCD Capability characteristic: Injection shell is using modified PP composite materials and aluminum alloy column precision tectonic process; with the easy pull-out filters, wet screens paper of the frame protection and shockproof design, frame bearing capacity of 100 kg and above,with anti-corrosion, anti - ultraviolet, anti-aging15 years, high and low temperature resistance (subzero 20 fp C - 50 fp C) without distortion, and fuselage life for more than 10 years. LCD panel control system, using single-phase various frequency speed, three-phase various speed, three-phase fixed speed intelligent electronic control systems and closed all high-quality match for the electrical, intelligent sewage cleaned regularly, wrong phase, short phase, overload current, water shortages protection and fault alarm function. Adopt Sweden 5090-patented technology evaporative wet paper filter net , and the evaporative area in more than 85%; Using 3 leaves impeller, using silencers acoustic and noise reduction technology, the noise can be controlled lower than 56 dB.
Tzjw-d-101b, tzjw-s-301b, tzjw-d-101a, tzjw-s-301a Carton box
Type:fan coil unit Place of origin:shanghai, china (mainland) The features of the fan coil units 1, motor with low noise, energy saving the fixed packet capacitor with self-lubricating with imported nsk bearings, precision dynamic balancing tuned, smooth operation and long service life. 2, fan ultra-wide-angle volute, multi-blade centrifugal wind wheel, and undergo a rigorous static and dynamic balance test adjust, smooth running, low noise. 3, the gorgeous shape designs, matching with environment diapason;four direction etc.The size design, installing layout is mot vivid;the extremely high degree strong dint sends breeze, also applying all kinds of busines places. Model air volume cooling capacity M3/h cfm btu/h Ck1-mfp-34wa-z 340 200 9000 Ck1-mfp-51wa-z 510 300 12000 Ck1-mfp-68wa-z 680 400 15000 Ck1-mfp-85wa-z 850 500 18000 Ck1-mfp-102wa-z 1020 600 24000 Ck1-mfp-136wa-z 1360 800 28000 Ck1-mfp-170wa-z 1700 1000 36000 Ck1-mfp-204wa-z 2040 1200 48000 Ck1-mfp-238wa-z 2380 1400 60000
We are Manufacturer of cold storage, cold room as per customer requirment.We used high quality raw material from renowned manufacturer in India.
The semiconductor refrigeration piece(te modules); thermoelectric cooling module; semiconductor refrigeration piece; thermoelectric refrigeration component Standard packing
FeatureApplications * long life * air purifier * high sensitivity* air quality monitoring * automatic calibration * air ventilation system * comes with temperature & humidity compensation * low cost Spec * module model:Aqm-300c * sensor:Aqs501 air quality monitoring sensor * gas detection: ammonia, hydrogen, alcohol, carbon monoxide, methane, propane, gan alkyl, styrene, propylene glycol, phenol, toluene, ethylbenzene, xylene, formaldehyde and other volatile organic gas, such as cigarettes, wood , paper burning smoke. * physical interface:Xh2.54-4 vertical outlet * output data:Ttl level¡§built-in 200ohm current limiting resistance * input voltage:5.0¡¡.2vdc ¡§without voltage reverse polarity protection * operating current:80ma * warm-up time:2 minutes * response time:10 seconds * recovery time:20 seconds * operating temperature:-10 --- 40 * operating humidity:95µ¶h * storage temperature:-20 --- 60 * storage humidity:60µ¶h * dimension:242015¡§l‡óh * weight :About 20g * sensitivity :1ppm hydrogen * sensitivity reduction:¡¡.2%/year * life:10 years Interface definition 1Power supply negative 2Power supply positive 3Output signal a 4Output signal b Output signal definition ABPollution degree LowLow0 LowHigh1 HighLow2 HighHigh3 Remarks¬hèùåê higher the pollution degree no., the worse the air quality.
1. Introduction: New Air intelligent controller (KF-800F) can monitor real-time indoor temperature, CO2 concentration. Controller output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial applications, and can effectively improve air quality, create a healthy, comfortable, energy-efficient living and working environment. 2. Buttons function 1. button: timing parameter setting 2. button: parameter increase 3. button: parameter reduce 4. button: setting working mode for controller, press this button slightly, the controller will be switched circularly betweenAUTO MANUAL TIMER POWER OFF. 3. Display explana4. Detailed explanation 1. AUTO (auto mode): high speed: CO2 concentration exceeds the setting concentration value of 300ppm; middle speed: CO2 concentration exceeds the setting concentration value of 100ppm; low speed: CO2 concentration exceeds the setting concentration value; stop: CO2 concentration is below the set concentration value. 2. MANUAL: set the ventilator as OFF(stop)LOW(low speed)MED(middle speed)HIG((high speed))by buttons and , and under this mode, the ventilator will run according to the setting, won¬H be affected by CO2 concentration. 3. TIMER (timing mode): run according to set time & speed, can set from Monday to Sunday, 4 periods every day, and 28 periods in total. 4. Automatic mode Cconcentration value setting when the ventilator starts: under the auto mode, press or button for one second, it will appear CO2 concentration setting value and flicker, then press and buttons to change the number (from 350 ¡§C 600ppm). Controller will return to normal working condition and save setting parameter automatically if you won¬H press any buttons more than 10 seconds during the setting process. 5. Timing parameter setting: press button for 2 seconds to enter parameter setting. First enter ¡ãlocal time adjust¡À, press button to switch week, hour and minute, the corresponding parameter will flicker, change the number by and buttons; after finishing adjusting local time, press button to enter the first period hour setting on Monday, press button to switch hour, minute, and ventilator speed, press and buttons to change the number. After finish the setting, press button to enter the second period hour setting on Monday. Repeat above steps to finish all the 28 periods setting. Controller will return to normal working condition and save setting parameter automatically if you won¬H press any buttons more than 10 seconds during the setting process. 6. Backlight: CO2 concentration less than 500ppm (green backlight), 500-799ppm (yellow backlight), higher than 800ppm (red backlight).
1. Introduction: New Air intelligent controller (KF-800E) can monitor real-time indoor temperature, humidity, VOC concentration. Built-in air quality sensor can monitor ammonia, formaldehyde, benzene, xylene, hydrogen, alcohol, carbon monoxide, methane, propane, Gan alkyl, styrene, propylene glycol, phenol and other Volatile organic compounds as well as wood, paper, cigarette smoke and a dozen combustion gasesController output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial applications, and can effectively improve air quality, create a healthy, comfortable, energy-efficient living and working environment. 2. Monitoring objects 1. Volatile organic compounds (VOC) concentration¡¡100ppm Real-time monitoring indoor air whether including formaldehyde, benzene, ammonia, hydrogen, alcohol, carbon monoxide, methane, propane, Gan alkyl, styrene, propylene glycol, phenol, toluene, ethylbenzene, xylene and other volatile organic gas, such as cigarettes, wood , paper burning smoke or not. 2. Indoor temperature: 0---- +50 3. Indoor humidity: 5 H----95%RH 3. Function & Feature: 1. Real-time display indoor concentration of volatile organic compoundsVOC) 2. Display the current indoor air pollution levels 3. Real-time display the indoor temperature 4. Real-time display indoor humidity 5. According to temperature, humidity and VOC concentrations, automatically adjust the ventilator operation 6. Display the new air system ventilator statusStop, slow, medium and high speed, working modeManual, automatic, timing 7. Automatic mode±bè ` the intelligent controller detect indoor air quality become worse, the new air system can automatically adjust the ventilator speed 8. Manual mode e can control the startup & speed of ventilator by ¡ãmode button on the controller panel or ¡ãRF remote control
1. Introduction: New Air intelligent controller (KF-800M) can monitor real-time indoor temperature, CO2 concentration. Controller output signal can directly control the startup and speed of ventilator. It can be widely used in residential, commercial and industrial applications, and can effectively improve air quality, create a healthy, comfortable, energy-efficient living and working environment. 2. Buttons function: 1. button: timing parameter setting 2. button: parameter increase 3. button: parameter reduce 4. button: setting working mode for controller, press this button slightly, the controller will be switched circularly between AUTO MANUAL TIMER POWER OFF. 3. Display explanation: Time Indoor temperature CO2 concentration Heating switch mode Operating mode Ventilator status 4. Detailed explanation 1. AUTO (auto mode): high speed: CO2 concentration exceeds the setting concentration value of 300ppm; middle speed: CO2 concentration exceeds the setting concentration value of 100ppm; low speed: CO2 concentration exceeds the setting concentration value; stop: CO2 concentration is below the set concentration value. 2. MANUAL: set the ventilator as OFF(stop)LOW(low speed)MED(middle speed)HIG((high speed))by buttons and , and under this mode, the ventilator will run according to the setting, wonH be affected by CO2 concentration. 3. TIMER (timing mode): run according to set time & speed, can set from Monday to Sunday, 4 periods every day, and 28 periods in total. 4. Automatic mode ¡ìCconcentration value setting when the ventilator starts: under the auto mode, press or button for one second, it will appear CO2 concentration setting value and flicker, then press and buttons to change the number (from 350 ¡ìC 600ppm). Controller will return to normal working condition and save setting parameter automatically if you wonH press any buttons more than 10 seconds during the setting process. 5. Timing parameter setting: press button for 2 seconds to enter parameter setting. First enter šÑ�N’“ã¸šÑ time adjust, press button to switch week, hour and minute, the corresponding parameter will flicker, change the number by and buttons; after finishing adjusting local time, press button to enter the first period hour setting on Monday, press button to switch hour, minute, and ventilator speed, press and buttons to change the number. After finish the setting, press button to enter the second period hour setting on Monday. Repeat above steps to finish all the 28 periods setting. Controller will return to normal working condition and save setting parameter automatically if you wonH press any buttons more than 10 seconds during the setting process. 6. Backlight: CO2 concentration less than 500ppm (green backlight), 500-799ppm (yellow backlight), higher than 800ppm (red backlight). 5. Specification
Product specification: 1.Fashion, colorful, best choice for gift 2.Touch button design, simple and convenient 3.Air quality sensor to real-time monitoring a variety of harmful gases 4.Colorful led lighting can be set at your pleasure 5.Ultra quiet, dc supply & brushless motor 6.Efficient negative oxygen ion generator to remove dust & sterilize, clean air 7.Activated carbon strainer can super absorb harmful gases 8.Home decorative embellishment, night light function 9.The best color alerts and purification partner for harmful gas in the car 10.Shield of polluted air in the office 11.Fashion, colorful, best choice for gift 12.Touch button design, simple and convenient 13.Air quality sensor to real-time monitoring a variety of harmful gases 14.Colorful led lighting can be set at your pleasure 15.Ultra quiet, dc supply & brushless motor 16.Efficient negative oxygen ion generator to remove dust & sterilize, clean air 17.Activated carbon strainer can super absorb harmful gases 18.Home decorative embellishment, night light function 19.The best color alerts and purification partner for harmful gas in the car 20.Shield of polluted air in the office
We, svar projects, one of the leading company engaged in manufacturing and supply of chris eco-friendly air ventilators (ceav) since 2001. We focus on quality and aim to achieve total customer satisfaction, both in products as well as in the services. Our corporate strategy is to design, manufacture and supply standard quality products backed by total solution for installation, commissioning and trouble shooting. 21"dia 24"dia 14"dia
Ventilation and refrigeration for central air conditioning made in china. Please contact us
Air volume: 190m3/h-2450m3/h excellent design with hairclip big bend, aluminum shutter fin, as well as double-edge pick-up mechanical expander, the air cooler is with high efficiency of heat exchanging with small water and air resistance; with the narrow joggles between the girth and side board, it has overcome the shortcomings of air leakage and easy rustiness of electric welding. Stable structure the condensed water seeper tray is shaped via once pressing, with inside and outside static spraying as well as once thermo shaped pe heat preservation layer. And without welding or leakage, the heat preservation layer is not easy to fall off. Nice appearance the chest is with qualified galvanized steel plate, with high strength, correct geometrical position, wonderful mutual exchange, rather easy to be installed. Disposed via static spraying, the unhidden units are rather nice and beautiful. Remote control the appearance design for ceiling-mounted series is rather home and domestic with remote control functions. Reliable running with full metal shells and qualified famous motor and bearings, the lfc series are with superlow noise, ensuring the unit to run quietly and reliably for a long time. Flexible matching electric speed adjusting switch or automatic control system provided by our company is available just according to the needs of users. 11.5kg~34kg
1. Especially designed for cold areas. The ambient is -15¡æ to 43¡æ and keep supply of warm water from 35¡æ to 60¡æ¡£ 2.High quality and reliability Stainless steel plate heat exchanger with maximum pressure 40 bar. 100% stainless water circuit keep water clean. Microprocessor control and error alarm and display. Well known components Copeland,Siemens,Danfoss and Wilo make it qualified and reliable. 3.Flexible installation Our heat pumps are suitable for many different heating systems to keep house warm and provide hot water. Connect with an exit boiler or replace the old electric/gas/oil heater. Installed for house heating and hot water supplying,solar heating and swimming pool heating(closed water circuit). 4. 2 years warranty ! We provide 1% free spareparts with full container order and 2 years warranty of main parts for factory fault since shipment arrival. 5. After-sale service We can provide free heat pump installation consultation and technical assistant. We can help to purchase other parts related to or recommend reliable suppliers directly. 6. Package and delivery We will put products in thick cartons and wooden pallets outside to avoid any damage during shipping. It will take about a week by air way,30 days by ocean shipping. We will try to provide the best price,products,service and delivery timely.
1.Cooling, heating and domestic water heating, 3 functions in one solution. One single unit can provide one family's need for sanitary hot water, summer cooling and winter heating. 2.Smart design that adapts to all types of installation, like duct unit, universal type, floor radiation heating and radiator heating.Easy installation for all solution, no need for extra water tank. 3.Super low temperature heating Special designed for low temperature at -20 No water circulation in outdoor that avoid water freezing dangerous to whole system. 4.50% energy saving and 1/4 cost of gas heater. With recirculation heat pump technology, efficiency is extremely high.The capacity is almost 4 times than conventional boiler and gas heater. 5.Safe, healthy and non-pollution All water tanks are made of stainless steel.Special material including wate pump is carefully choosed to protect the sanitary water safe and healthy. Programed sterilization function will clean water tank automatically and provide clearn water all the time. 6. We provide 1% free spareparts with containered order and 2 years warranty of main parts for factory fault since shipment arrival. 7. After-sale service We can provide free heat pump installation consultation and technical assistant. We can help to purchase other parts related to or recommend reliable suppliers directly. 8.Package and shipping We will put products in thick cartons and polywood pallets outside to avoid any damage during shipping.It will take about a week by air, 30 days by ocean shipping.
1. Weekly on/off timers (different for each day) help to choose the lowest electricity price working time to save bill. 2. 5 Times Energy Saving as Normal Gas or Petrol Heater. 3.No capacity loss at even -45¡æ, no freeze with glycol added. 4.Name brand components ensure high quality. Heat exchanger: SWEP brand plate heat exchanger from Sweden. Compressor: Daikin brand Scroll type Heat expansion valve: Emerson brand Water pump: Wilo brand from Germany or Grundfos brand from Denmark Four way valve: Saginomiya brand of Japan.
Efficient micro-channel heat exchanger, smaller volume and higher performance Enhanced corrosion resistance of components to meet the long-term operation under humidity The shock absorption design, suitable for bumpy roads The overall lightweight design, low cost and less fuel consumption. Strong steel frame packing.
General standard: Size: 2000/4000*1200(L*W) CompressiveStrength:450kpa Thickness:20mm(also provide 25mm and 30mm) Water Absorption:2.90% Alum.Foil Thickness:0.08mm(both sides) Dimensional Stability:0.53%(70+/-2 Density:71kg/m3 Oxygen Index: 57.80% Fire Retardant: A Smoke Density: 2 Thermal Conductivity: 0.018W/m.k Smoke Toxicity: 25 (Average Temperature 25+/-2). Advantage : Lower heat conductivity, higher thermal efficiency. High Fire-Protection rating Low density, light weight; Easy Installation Foamed with CFC free materials, environment protective; Hermetic seal ensures little air leakage; With aluminum foil reinforced on both side, its corrosion protective, hygiene, and has a beautiful appearance; Foamed with closed-cell structure, its water-proof and sound-insulated. No protrudent flange on the connections, it can save a lot of building space. 1*40HQ.
General standard: Size: 2000/4000*1200(L*W) CompressiveStrength:450kpa Thickness:20mm(also provide 25mm and 30mm) Water Absorption:2.90% Alum.Foil Thickness:0.08mm(both sides) Dimensional Stability:0.53%(70+/-2 Density:71kg/m3 Oxygen Index: 57.80% Fire Retardant: A Smoke Density: 2 Thermal Conductivity: 0.018W/m.k Smoke Toxicity: 25 (Average Temperature 25+/-2) Advantage : Lower heat conductivity, higher thermal efficiency; High Fire-Protection rating Low density, light weight; Easy Installation Foamed with CFC free materials, environment protective; Hermetic seal ensures little air leakage; With aluminum foil reinforced on both side, its corrosion protective, hygiene, and has a beautiful appearance; Foamed with closed-cell structure, its water-proof and sound-insulated. No protrudent flange on the connections, it can save a lot of. 1*40HQ.
