Introduction: Measuring calorimeter figures out the quantity of used heat based on the temperature of water inlet and outlet as well as water that flows through it, which can be applied to the household metering management of heat and cool energy of central heating and cooling system (air conditioners and chilled water system) in cities and towns. Ic card calorimeter mainly consists of flow sensor, temperature sensor, calculator and electric valve. It realizes the measuring and charging control of calorimeters. When there is no energy in the calorimeter, ic card calorimeter will immediately close the valve system. The valve will open automatically as soon as the ic card calorimeter is charged by the user. Functions: 1) measurement and deduction function: when there is flow rate and temperature difference, ic card calorimeter will measure and deduct the actual heat accurately. When there is no any heat, the ic card calorimeter will close the valve system, and meanwhile, the cumulative amount in the ic card calorimeter will be added. 2) display function: varieties of status and data in the ic card calorimeter can be shown circularly through the keys in the lcd. 3) prompting function: error prompt is available when eeprom, clock, and temperature sensor go wrong or when mistakes and problems occur, such as no calibration temperature, abnormal valve and wrong operation etc.. 4) prepaid and charge for heat consumable function: the calorimeter will add the heat purchased to the original and display the current remaining amount after the charged user card has been inserted. Heat will be supplied when the valve is turned on. When there is no heat, the calorimeter will close the valve automatically and cut off the supply of water.
1. Highly efficient rotating stirrer. 2. On/Off switch with pilot lamp. 3. Non-stick coating plate. 4. Lid as serving bowl. 800W, 220V, 50HZ Burst the corn after 2 minutes, be completed with 3 minutes Material: approx 100g Capacity: approx 3.5 liters Volume weight: 35~40g/L. Ctn size: 35.5*47.5*41cm. Container Loading Qty: 20Ft Qty(pcs)-820pcs 40Ft Qty - 1720pcs
Household aluminum foil---applying to remain food fresh, barbecuing, keeping kitchens clean, used in aviation, restaurant, hotel etc. With the thickness between 9--20micron, width between 200--600mm and length between 2_300m. Food container of aluminium foil---being used for food packaging in hotels, catering businesses and restaurants, as well as disposable instant food container /tray/box. Aluminum foil machine: except for aluminum foil products, we sell a variety of deep-processing equipment for aluminium foils. To customer's reference
Material: cold plate/plastic Product dimensions: 47.5 x 35 x 10.5cm Color: black Packaging: plastic bag and color box Packaging carton dimensions: 51 x 37 x 43cm Packing volume: 0.081m3 Number of sets/carton: 5pcs/carton Net weight: 10.5kg Total weight: 13.5kg Quantity in container: 20ft: 1,920pcs 40ft: 3,900pcs 40ft HQ: 4,400pcs Bar codes: can be available Minimum quantity of order: 1,920pcs Technical specification: 230V, 2,000W Production time: within 30 days after confirmed order Product Feature: Electric barbecue grill For indoor or outdoor use; Ideal for grilling burgers, chicken, fish, even thick steaks; Adjustable thermostat and power indicator light; Portable, detachable and easy to clean; Safe cool touch handle and base; Bottom drip tray available for collecting the grease;
Plastic housing Non-stick coated grill pan 8 non-stick coated mini pans On/off switch with pilot light Non-slip feet
1.100% Food-Grade Silicone Material 2.Heat-Resistant up to 230 degrees centigrade 3.Non-stick finish, durable, easy-cleaning 4.Any color available 5.Welcome custom design 6.FDA, LFGB, SGS approval of raw material, FDA and LFGB report for finished product
Silicone cake mold
2000watts on 220volts 2000watts on 110volts
Product size: 31*29*26cm Surface: electropainting and then spray painting Inner box size: 35*34*3.55cm Carton size: 0.032CBM 37*36*24CM Loadage: 1x20:5250PCS 1x40:10500PCS Weight: 13.5/14.5kg White box
Assembling Size: 85*41*82CM Body iron sheet thickness: 0.6mm(spray painting) Weather board thickness: 0.6mm(spray painting) Placed board size: 560*65*12MM With 1pc grill net: 485*285MM, wire diameter: 3.8*3MM(Chromed) With 1pc heat preservation net, wire diameter: 3*3MM(Chromed) With 1pc grill skewer and grill fork 0.7MM(Eletrophoresis) 2pcs plastic wheels Carton size: 0.016CBM 67*7*34.5CM Loadage: 1x20:1750PCS 1x40:3500PCS Weight: 5.8/7kg White box
1) electric operational. 2) material: stainless steel shell, acrylic transparent window, ceramic grinder core 3) with a light 1pc/color box, 48pcs/carton Size of carton:51*37.5*24cm G.W/n.W:18.5/17kgs
The reasonable different speed between the bowl and beater makes the dough mixed evenenough and can draws the dough to the max. And improves the drinking capacity. Products yt-Series spiral MixersYt-100 yt-50Yt-25 Stirs system Checkout before send out factory the poductions will be take to port mass production
Popcake machine
It can produce various types of snack foods Woody case
The exclusive concept of the machine with a new regulation system guarantees high quality dough and the optimal precision for each dough. This machine was expressly built to flattener all types of dough and for variable sizes (from10 cm to 50 cm) with variable dough thickness 1 to 8mm. Feeding Conveyer : -Made by food grade non stick belt witch delivers the dough to the first flattener. Conveyer frame made by 3 mm stainless Steel sheets. -Easily removable Stainless Steel flour tank mounted of the rear side of the conveyer frame and equipped with independent motor to reduce mechanical connection. -Fitted with removable Stainless Steel plate for flour and dough decay accumulation. Frame : -Optional: Stainless Steel frame or Painted Steel frame and covered with 1.5 mm Stainless sheets. First intermediate flattener: -Dough pieces incoming form the first conveyer are flattened between Four Hard chromed cylinders. -The frame made by 5mm Stainless Steel sheets. -All mechanical parts, such as: chain-sprockets-bearings are from the external side of the flattener frame, and well covered with 2 mm Stainless Steel, to insure a complete isolation for the dough pieces and maximum security measures and safety for the workers.
The machine has been designed for the transformation and forming of food dough for the pastry productions industry. Is able to transform dough consisting mainly flour, sugar backing powder flavorings like cheese , ketchup, thymeà. These dough are transformed by the BREADSTICK MACHINE into different products according to the kind of form applied to the working head and the different dimensions, according to the selected working cycle. The machine is made by tubular stainless steel frame work with outside panels housing the machine compartment and hiding the inside actuating components. These are piloted by an electromechanical control system for managing working parameters. The parts which are in contact with the product to be processed are made of materials that fit for the food industry applications or in stainless steel. The machine interface with the user by means of a panel for setting work-cycles, a regulating system for the range of mechanical changes required by the various products to be processed. The breadstick machine is provided with a tray stacking tank and a load belt supplying the machine with the dough to be worked.
A highly improved unit operating on diesel or Gas (Propane or Natural Gas) and designed to supply a rationally and properly distributed heat for the production of an excellent quality Pita Bread. Equipped with a feeding unit conveying automatically the leavened dough sheets from the final proofer into the baking chamber of the oven. The perfect thermal insulation of the body prevents any heat loss, resulting a remarkable gas saving. The external body is entirely covered with Stainless Steel plates, giving the unit a distinguished appearance. The machine is mechanically simplified, permitting easy operation and minimizing the need of maintenance. Frame Assembly: -Made by painted steel frame and covered with Stainless Steel 1 mm thickness sheets. Conveyer assembly: -The tunnel combustion chamber made by Heat Resistant refractory bricks or Stainless steel S309 specially designed for baking thin and thick bread and completely isolated by high density Rock-Wool sheets. -All mechanical parts, such as: chain-sprockets-bearings are from the external side to insure a complete isolation for the dough pieces . -The parts subjected to direct flame are made by 6 mm Heat Resistant Stainless Steel (S309). -Heat resistant Stainless Steel conveyer chain for long life trouble free operation. -Heat resistant Stainless Steel (S309) conveyer plates for high quality bread and long life trouble free operation -Production speed controlled by mean of frequency inverter. Burner: -High quality diffusion flame burner working on Gas that compliance with safety and health regulations with respect to ISO and FDA Norms. Thermal Power: from 180 to 400 Kw. -Optionally: Electronically modulated burner where the fan and the fuel pump are equipped with inverter.
Pita bread line
Complete line for pellets Potato Chips Line for 50, 100 Kg/Hr Production, Kurkure & Other Pellets upto 100, 200 , 300 Kg/Hr production
Meat mincer The series of meat mincers (no. 5-32) is inside and outside brightly tin-plated. Having gone through the test of practical use, our mincers have been proved: the trusty product for their best quality. The suitable worm make the user to handle them with great ease. All parts can be easily assembled and taken apart for cleaning. 10pcs/carton, gross/net weight:27/25kg dimensions of carton: 55*35*30cm
