The Fiberglass Alkaline-restance Mesh Fabric is on the Basis of C-glassor E-glass woven fabric,then coated by acrylic acid copolymcrliquid. Place of Origin::Hebei, China Brand Name::FYC Application::Wall Materials Weight::30-300g, 80-160gsqm Width::20cm-200cm, 20cm-200cm Mesh Size::2.5*2.5/3*3/4*4/5*5/10*10mm Weave Type::Plain Woven, Plain Woven Yarn Type::C-Glass Alkali Content::Medium Standing Temperature::500 Product Name::Fiberglass Mesh Material::Fiberglass Yarn Color::Customer's Requirement Length::50-100mm Packing Details::By shrink film first each roll, then put into carton
Product name:fiberglass mesh Place of origin::hebei, china Brand name::fyc Application::wall materials Weight::30-300g, 80-160gsqm Width::20cm-200cm, 20cm-200cm Mesh size::2.5*2.5/3*3/4*4/5*5/10*10mm Weave type::plain woven, plain woven Yarn type::c-glass Alkali content::medium Standing temperature::500 Product name::fiberglass mesh Material::fiberglass yarn Color::customer's requirement Length::50-100mm Packing details::by shrink film first each roll, then put into carton Payment terms::tt, lc, dp, cash Fiberglass alkaline-resistance mesh The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Application of fiberglass mesh : 1.Reinforce cement, stone, wall materials, roofing, and gypsum etc.. 2. All types of thermal insulation and heat protection. 3.Used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 4.Roof waterproof. Advantage of fiberglass mesh 1.High strengthïgood impact resistance and not easy to be teared. 2.Good chemical stability 3.Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property 4.Fire resistant, thermal insulation, sound insulation, insulations etc.
Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable,corrosion resistant and has good insulation performance, which make them safe for using in cable occupied duct. High Density polyethylene(grade: for insulating and jacketing of Telecommunication cables) is used in the outer diameter coating. Duct rodder will be equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving. Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N5% Tensile Modulus >46.500Mpa
Glass fibre combination non woven Glass fibre combination non woven is made on the base of non woven by compositing some density glass fibre, through high temperature, stoving, finalizing the design. It is a kind of reinforcement combination material. Function: it is used for making changed sbs waterproof material, and for waterproof in the underground, building roofing, ground and pond. Combination fabric is base cloth of using sbs waterproof material, its tension of warp and weft is more than 600n. Among waterproof materials, this kind of product is the best favourable.
Glass;Fiber Chopped Strand Mat Description E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model. Glass;Fiber Chopped Strand Mat Characteristics 1)Weight is evenly distributed per gram 2)Saturated fast, 3)Bubbles easy ;to be eliminated, 4)High transparency 5)Excellent coating model;performance 6)Less;consumption of ;resin. Glass ;Fiber Chopped Strand Mat Application Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life. Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products. Glass;Fiber Chopped Strand Mat Technical Parameters ModelTypeMass per Unite Area(g/m2)WidthLinear density(172;m) Loss on lgnition(%) WDQ150 E-Glass 150 104011-13 1.5%-8.5% WDQ225 E-Glass 225 1040 11-13 1.5%-8.5% WDQ280 E-Glass 280 1040 11-13 1.5%-8.5% WDQ300 E-Glass 300 1040 11-13 1.5%-8.5% WDQ450 E-Glass 450 1040 11-13 1.5%-8.5% ZDQ280 C-Glass 280 1040 13-17 3.0%-6.0% FDQ300 CP-Glass 300 1040 13-17 3.0%-6.0% Glass;Fiber Chopped Strand Mat Packaging Packing Quantity Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose centralite ii wind turbine gearbox accessories.Import and export of goods and technology
WuQiang Superstar Fiberglass is top window screen manufacturer, fiberglass window screen mesh supplier in China with factory price. Fiberglass insect screen and fiberglass mesh is mainly product. We has formed an integrated enterprise including manufacturing, research, trading, export, etc.
Hole size:4X4,5X5,10X10 etc. Weight:45g/m2,90g/m2,130g/m2,165g/m2 etc Width:10cm-200cm Length:10m-500m Color:white,black,yellow,blue etc Packing:woven bag or carton
Alkali-resistant fiberglassmeshhas excellent properties including water-resistance, alkali-resistance, flexibility, softness and resistance to aging. It is widely used in reinforcing walls, natural marble, plaster board, artificial stonematerialsand exterior insulation finishing system. It is also widely used for renovating building surface. Fiberglass mesh is very durable, versatile and cost-effective. It is the building material which is suitable for all kinds of architectural styles and shapes. 45 g/m2, 51 g/m2, 70 g/m2, 75 g/m2, 140 g/m2, 145 g/m2, 160 g/m2, 165 g/m2. Hole size: 2.3 mm 2.3 mm, 2.5 mm 2.5 mm, 4 mm 4 mm, 5 mm 5 mm. Width:50 mm to 2000 mm. Roll length:10 meters to 300 meters. Packing: woven bag or carton. Colors available:white (standard), blue, yellow, orange, black, green or according to requirements.
Hole size:4X4,5X5,10X10 etc. Weight:45g/m2,90g/m2,130g/m2,165g/m2 etc Width:10cm-200cm Length:10m-500m Color:white,black,yellow,blue etc Packing:woven bag or carton
Fiberglass cloth is an engineering material. It has covered many domains such as electric appliance, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection. According to fabric organizational structure and appearance,. Features: Anti-burning, corrosion resistant, stable structure, heat-isolating, minimum elongated shrinkage, high intensity.
Port: Qingdao, China Production Capacity: 30.000t/Year Payment Terms: L/C, T/T Material: Polyamide(Nylon 6.66)/PA Usage: Engineering Plastics Plastic Properties After Heated: Thermoplastic Plastics Plastic Forming Method: Injection Color: Customized Character: Granule Contact NowRequest SampleCustomized Request Chat with Supplier. Inquiry BasketFavorites Share Basic Info PA66+25%GF: Injection Grade Material Status: Commercial, Active, Globally Transport Package: White Kraft Paper Bag Specification: 20KG/BAG Origin: Shandong, China HS Code: 3908101190 Product Description
Specialties: 1. PTFE Teflon, Architectural Membrane Materials 2. PTFE Teflon, Coated Glass Fabrics 3. PTFE Teflon, Coated Open-Mesh Glass Fabrics 4. PTFE Teflon, Coated Glass Fabric Adhesive Tape 5. Silicone Coated Glass Fabrics
Fast Cure 2inch 460cm Pipe Fiberglass Wrap Fix Tape Rapid Stock Leak Wrap Repair Bandage It is a roll of fibreglass bandage impregnated with water-activated resin. You simply immerse the bandage in water for 10 seconds, then apply by wrapping around the damaged pipe area. A successful pipe repair can be achieved in 30 minutes. Introduction of Fiberglass wrap repair bandage The Pipe Repair Bandage is an innovative and cost effective solution to repairing pipework without any welding, cutting or draining down of your system.The bandage simply works on contact with moisture and water. 1. Materials: fiberglass or polyester fabri impregnated with water-activated resin 2. Width Size: 2.5cm;5cm;7.5cm;10cm;12.5cm;15cm; Length: 1m; 1.5m; 3.6m; 4m 3. Shape: customized Instruction of Fiber glass repair fix bandage 1.shut down pipe, soak bandage in water for 10 seconds; 2. wrap it around the pipe, over steel putty, tighten firmly; 3. allow 30 minutes for pipe repair to set rock hard Application of Fiber glass repair fix bandage 1. Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap water activated resin wrap Fiberglass repair tape 2.Steel and Aluminum Works: Steam and water pipes, sludge and slurry lines 3.Petroleum Plants: Repair on flammable pipe leaks without using tools - oil, gas, water supply lines 4.Power Stations: Ash transfer systems, pulverized fuel tubes, cooling water lines. 5.Manufacturing: Sealing of leaks in oil, water and coolant pipes. 6.Pipe Porosity: Strengthens and seals pipes with porosity due to internal corrosion or crack. 7.Merchant Shipping, Yachts: Emergency repairs in dock or whilst at sea to fuel lines, water pipes 8Waste pipes. Also for repairs to ship's structure. 9.Household: Repair pipe of glass, PVC, metal, strengthen shank of garden tools, household appliances Fiberfix tape Emergency pipe repair bandage fibre fix tape leak repair wrap Precautions of Fiber glass repair bandage 1.The operator should wear gloves before touch the bandage. 2.Storage at temperature(4080) 3. Shelf-life: 2 years. 4. Apply under 450psi wa
Fiberglass grid use high-quality enhanced E-glass fiber yarn, made by foreign advanced warp woven into a substrate, the use of warp-oriented structure, make full use of fabric yarn strength, improve its mechanical properties, to have a good Tensile strength, tear strength and creep resistance, and through high-quality modified asphalt coating from the plane network-like material. The principle of similar compatibility, focusing on its composite properties with the asphalt mixture, and fully protect the glass substrate, greatly improving the substrate wear resistance and shear resistance, which can be used for pavement enhancement, resistance Crack rutting and other road diseases, solved the problem that asphalt pavement is difficult to improve. Specification: Width: 3mm or 4mm or as clients request Length: 100m or as clients request FUNCTION: High tensile strength, low elongation - fiberglass geogrid is based on glass fiber as raw material, has a high resistance to deformation, fracture elongation of less than 3%. No long-term creep - as a reinforcement material, with the long-term load in the case of resistance to deformation, that is, anti-creep is extremely important, glass fiber does not creep, which ensures long-term product performance. Thermal stability - glass fiber melting temperature above 1000 â??, which ensures that the fiberglass geogrid in the paving operations to withstand thermal stability. Compatibility with asphalt - fiberglass geogrid The material coated in the post-treatment process is designed for the asphalt mixture, and each fiber is fully coated and has a high phase with the asphalt Capacitive, thus ensuring that the fiberglass geogrid in the asphalt layer will not be isolated with the asphalt mixture, but firmly together. Physical and chemical stability - after a special post-treatment agent for coating, fiberglass geogrid can resist all kinds of physical wear and chemical erosion, but also to resist bio-erosion and climate change, to ensure its performance is not affected. Aggregate insert and limitation - Since the fiberglass geogrid is a mesh structure, the aggregate in the asphalt concrete can penetrate it, thus forming a mechanical insert. This restriction hinders the movement of the aggregate so that the asphalt mixture can achieve better compaction, higher load bearing capacity, better load transfer performance and smaller deformation under load conditions. APPLICATION: Roadbed reinforcement, prevent road surface cracking. Road reconstruction. Soft soil reinforcement, improve road whole bearing capacity and prevent cracking.
Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
Standard Panel Size: 1220mm,915mm-wide 3050mm,6100mm-length Bearing Bar: 38mm Open Area: 50% Approx Weight (With three-core shoots): 19.1kg/m
Plum tube varieties CT32A CT32B +$ 0.60 CT34A$ -1.42 CT42 +$ 0.76 CT45A +$ 2.36 CT45B$ -0.03 CT51 +$ 2.02 CT90B +$ 14.47
38*38*38(mm) Panel size available: 1220*4000, 1220*3660, 1220*2440, 915*3050, 1524*3050, 1524*4000 Bidirectional force. Bearing bar thickness (top/bottom)ï7.0/5.0 Bearing bar centerï30 Open aeraï68% Approx weightï19.5kg
Feature of fiberglass grinding disc: we can made varies of grinding wheel from 4inch to 9inch,our grinding wheel are made by high quality abrasives with strong resin bond and high quality fiber glass net,it is sharp ,durable,they are exported to many countries all over the world and received a good reputation from our customer. 1.material:alum oxide 2.speed:80m/s 3.usage:for metal,steel,inox 4.we can make it green,red and black color,or as your requirement. 5.all of our grinding wheel is checked carefully before packing. 6.it is with very high speed,easy to grinding metal,stone,etc. Advantage: 1. competitive price Near the raw materials region, low labor costs, so lower production cost. 2. Locate in the eastern of China,and close to the port. 3. Advanced technique. 4. More than 10 years production experience. 5. Strict quality testing & inspection,good after-sale service. 6. ISO9001:2000 certificate. 7. Abundant export experience. 8. Accept OEM brand. 9. Small order is accepted. Company Information: The company has been established for several years, the marketing system spread all over the country rely on the domestic leading technology and reliable products.It has the world class technology expert, always pay attention to the domestic and foreign advanced technology and the production technology application, so we can obtain the highest quality product with the lower cost. Packing&Shipping: 1. A container can carry 220,000 pieces 2.A box can carry 500 pieces FAQ: 1.How many nets you have for metal cutting disc we use single and double reinforced nets 2.You are Manufacturer or trading company We are Manufacturer of cutting disc and grinding wheel for many years 3.Do you accept OEM for customers brand Yes, we do, but need MOQ for mass production. If take our brand, less qty with mix sizes are accepted. 4.Do you have inspection procedure before shipping: Yes, we do, 100% QC inspection Before Shipment. 5.What is your payment term Usually TT 30% deposit, and clear the balance before shipping or against copy of B/L. 6.What is your port of shipment Qingdao or lianyungang We are being on service of you within 24 hours,welcome your inquiry any time
