3k Carbon fiber rectangular tube, the inner diameter is 60*18mm, thickness is 5mm, or as your requested. It depends on your demand. About the length, it's according to the order.The surface finish, it can be 3k weave(plain or glossy), or as requested. The main application is industry. If you have any questions, you can contact us at all times.
Water fed pole is a new and durable product of Weihai Xinbo Composite Products Co., ltd. It consists of telescopic pole, brush, adaptor, hose. Telescopic pole, we have B series(horizontal clamp) and X series (vertical clamp). Our telescopic pole is hollow tubes which can allow the water hose go through it. About normal size, we have 18~84 ft, we also can customize the products according to your request. Brush, it is connected with water hose and adaptor. Adaptor, it is used to connect water fed pole and brush. And the angle, it can be adjusted according to your requirements. Hose, we have black and green. It’s durable, wearable, anti-freeze crack. After assembly, you can use it to clean the windows, it’s very convenient and easy to operate. If you have any other questions, please feel free to contact with us.
k carbon fiber roll wrapped tube, the technology is roll-wrapped, so it's more durable than pultrusion. Surface finish, we can provide natural, 3k weave, glossy, matte, etc. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. And it can be used for sports, aircraft, etc. If you have any doubts, you can contact us at all times.
Water fed pole is a new and durable product of Weihai Xinbo Composite Products Co., ltd. It consists of telescopic pole, brush, adaptor, hose. Telescopic pole, we have B series(horizontal clamp) and X series (vertical clamp). Our telescopic pole is hollow tubes which can allow the water hose go through it. About normal size, we have 18~84 ft, we also can customize the products according to your request. Brush, it is connected with water hose and adaptor. Adaptor, it is used to connect water fed pole and brush. And the angle, it can be adjusted according to your requirements. Hose, we have black and green. It’s durable, wearable, anti-freeze crack. After assembly, you can use it to clean the windows, it’s very convenient and easy to operate. If you have any other questions, please feel free to contact with us.
Colorful fiberglass tube, the technology is pultrusion, so it's more beautiful. About the color, we can provide white, red, etc, it can be produced according to your request. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. If you have any doubts, you can contact us at all times.
Hot sale fiberglass tube, the technology is roll-wrapped, so it's more durable. About the technology, we have roll-wrapped, pultrusion, pull-winding, etc. It can be used as requested. Surface finish, it can be yellow, red, etc. It can be produced according to your request. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. If you have any doubts, you can contact us at all times
Carbon fiber rolls for industry, surface finish is natural in general, but it depends on the actual situation. The material is carbon fiber, and we adapt roll-wrapped technology, so it has higher strength and lighter weight. About the diameter and length, it according to your request. It's used for industry as a roller. if you have any doubts, you can contact us at all times.
Carbon fiber antenna mast, the length we have 18ft~84ft, but we can customize the products according to your request. About the diameter, the smallest inner diameter is 20.5mm, thickness is about 1.4~1.5mm. Surface finish is natural, 3k plain/twill, etc, it depends on your actural situation. We have B series(horizontal clamp) or X series(vertical clamp) for you to choose. This model is X series. The material is Nylon(PA66). The color that we have red and black. Application: Flag pole, radio mast, etc.
Fiberglass cloth is an engineering material, which has many excellent characteristics, such as anti-burning, corrosion resistent, stable structure, heat-isolating, minimum elongated shrinkage, high intensity, etc. This new material product has already covered many domains such as electric appliance, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. According to fabric organizational structure and appearance, there are such kind of products: plain weave, twill weave, satin weave, gauze weave. Organizational Structure and Application 1)Plain weave: it can be used in electricity insulation materials and reinforced materials in industry, because of its tight structure, plain and clear lines. 2)Twill weave: compared with plain weave, it is of high density, high intensity, with a soft and loose structural weave. It can be used as ordinary reinforced materials, filter materials, and painting cloth, 3)Satin weave: compared with plain weave and twill weave, it can made out better products with higher density and intensity, as well as better handle, soft and loose structura. It is applicable higher reinforced material in machinery, (also said long shaft satin) 4)Gauze weave: there are clear and uniform gauze holes on the surface of such product, stable structure, it is mainly used in the wall heat preservation decoration and the resin grinding wheel enhancement cloth.
Plain weave window screening Function: widely used in building trade, stock raising, garden, all kinds of airiness and establishment of preventing mosquito and insect Feature: glass fiber single silk coated plastic plain weave window screening is a kind of mesh product, which is made of glass fiber single silk coated resin, through beaming, weaving and heat finalize the design series process. This product possess many fine function, such as excellence anticorrosion, high tensile strength, deformation resistance, non adsorb , using for long time and with top stiffness. Color: national popular color black, hoariness, which are fit the eye, its appearance is elegance.
FIBER GLASS MESH This product is a new pattern building material and is necessary goods in modern building. It is the main material in outer wall heat preservation, interior wall anti cracking. Application:Cement,plastic,asphalt,marble,roof,inside and outside wall etc. Characteristics:High strength,excellent alkali &acid resistance,strong adhesion with resin,easy dissolution in styrene,with top stiffness and locativeness,widely used as an ideal reinforcement material. Specification: 5 mesh, 6 mesh,7 mesh, 60g---180g. If needed special specification, please order the goods.
Brief description:As one of biggest duct rodder manufacturers in Asia, we provide the duct rodder with high quality and competitive price. We could produce from 4 to18mm diametersduct rodder, and provide duct rodder adding with copper wire, stainless steel wire for detecting uses. So the duct rodder is also called Detectable Rodders. According to customersrequirement, We could produce different length and colorr duct rodder. Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N5% Tensile Modulus >46.500Mpa
Frameless fiberglass wall mural Handmade for a unique touch Exceptional durability for long-lasting beauty Easy to clean and waterproof for hassle-free maintenance Impressive three-dimensional effect adds depth to any space Suitable for both interior and exterior applications Free shipping for added convenience Effortless installation with screws
The insulation is white, loose-fill virgin fiberglass designed for pneumatic machine installation behind non-woven Optima fabric, or loose-fill the attic.
Product Information: The fiberglass knitted stitched felt is made by cutting the fiberglass raw yarn into a certain length, randomly and uniformly distributed, and then stitched with stitching thread. It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Weight(g/m2): 300g/m2~1800g/m2 Width(mm): 100mm-3900mm. Also can select to add the Polyester veil (30g/40g) or chopping layer(300g) according to the customer's requirement. Product Specifications CMK300: C-glass, 300±20g/m2, 100-3900mm Width; CMK380: C-glass, 380±20g/m2, 100-3900mm Width; EMK250: E-glass, 250±10g/m2, 100-3900mm Width; EMK300: E-glass, 300±15g/m2, 100-3900mm Width; EMK380: E-glass, 380±15g/m2, 100-3900mm Width; EMK450: E-glass, 450±20g/m2, 100-3900mm Width; EMK600: E-glass, 600±25g/m2, 100-3900mm Width; Applications: It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Packaging Information: It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
Product Information: Fiber glass cloth is a multi-directional reinforced fabric made of glass fiber yarn, with plain weave, twill weave, satin weave. Fiberglass cloth is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity. 1. Suitable for reinforced unsaturated resin, vinyl resin, epoxy resin, phenolic resin 2. Widely used in hand lay-up, pultrusion, winding and vacuum infusion and other processes 3. This new material product has already covered many domains such as electric appliances, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Terminal products include: pultruded profiles, auto parts, yachts, pipes, plates, sports equipment, wind energy blades and other FRP products. Product Specifications EW25: 25±1g/m2, 100-3200mm Width, Plain; EW50: 50±2g/m2, 100-3200mm Width, Plain; EW80: 80±3g/m2, 100-3200mm Width, Plain; EW100: 100±3g/m2, 100-3200mm Width, Plain; EW135: 135±4g/m2, 100-3200mm Width, Plain; EW160: 160±5g/m2, 100-3200mm Width, Plain; EW200: 200±6g/m2, 100-3200mm Width, Plain; EW300: 300±9g/m2, 100-3200mm Width, Plain; EWT100: 100±3g/m2, 100-3200mm Width, Twill; EWT135: 135±4g/m2, 100-3200mm Width, Twill; EWT160: 160±5g/m2, 100-3200mm Width, Twill; EWT200: 200±6g/m2, 100-3200mm Width, Twill; EWT300: 300±9g/m2, 100-3200mm Width, Twill; EWS300: 300±9g/m2, 100-3200mm Width, Satin; Product Properties: 1.High intensity and quick wet out 2.Anti-corrosion and electric insulation Packaging Informationï¼? It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or woven bag. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Carbon Fiber Surface Mat is a non-woven tissue made from randomly oriented carbon fibers distributed in special binder by a wet lay process. It's a new super carbon material, with properties of high performance reinforced, high strength, high modulus, fire resistant, corrosion resistant, fatigue resistant composites. It's mainly applied to aerospace, medical instrument, sports equipment, conductivity, anti-static, and anti-spark properties and car parts etc. Product Specifications C-FM10: 10±1g/m2, 100-1300mm Width, Resistance()
FRP is a fire-rated material made from fibreglass sheets and bonded through synthetic resins. It is extremely sturdy, rigid and light weight. We can supply FRP meter boxes and other such moulded products as per customer's specific requirements.
Fiber Glass Tape as the name suggests, is a woven fiberglass fabric along with a pressure sensitive adhesive system. These are non-alkali taps that show thermal resistance and insulation. It wrapped around an exhaust system in order to retain the heat for longer and improve engine efficiency. fiberglass wrap tape commonly used in construction and repair projects to provide additional strength and stability to a structure.
