Asian Farm Machinery Equipments Suppliers and Manufacturers

Product Usage: Grain is easy to mold in rain season or summer.This kind of rice dryer machine is to dry wheat, corn, rice and other grain materials by method of circulation,to ensure that the moisture content of grain can meet the safe storage or processing requirement.With lower temperature,the burst rate is very low.It is specially designed for long rice paddy. Our rice dryer machines are of 10T, 15T, 20T, 25T, 30T,etc. Product Features 1. Fully automatic (automatic monitor over hot air, grain and moisture, automatic failure alarm); Automatic circulation, discharge and shutdown system; 2. The furnace can use coal, wood,biomass particles, crop straw, husk, petrol oil or gas, etc. 3. Lower cost. To reduce 5% moisture of 12 tons rice,it costs 11 usd if use coal as fuel, 6 usd if use husk(If your husk is free,the cost is only 2 usd ). 4. With good effect of grain.Vertical type dryer is a new design by adopting low temperature heating,which can keep original color and taste, shining surface,no sticky,low broken rate. 5.The feeding, circulation and discharge systems are combined with elevator.It has the characteristics of light weight and small area. 6. Use large spiral feeder, high strength nylon bucket, stainless steel board, wear-resisting, anti-deformation, durable and no hurt to grain. 7. With cleaning device, easy to remove grain remaining in case of mixture. 8. Easy installation, operation and maintenance Working Principle: The rice dryer includes dryer machine elevator, belt conveyor, electric control cabinet, stove. After cleaned, the grain is sent to the storage section at the top of dryer by elevator. The material level meter controls the feeding to ensure that the equipment is always in full load to improve efficiency.The grain runs in reverse direction with hot air in dryer to realize the whole process of preheating, drying, reversing, drying and cooling, and finally discharged by the belt conveyor at the discharge section.The blower sends used hot air to the collector for purification,so the hot air can be recycled to save fuel consumption. In the drying process, the drying speed should be controlled. If dried or the cooled too fast, the rice will be easily burst.To ensure the drying quality of rice, the drying speed should not be controlled below 1.5% per hour. In addition,lower hot air temperature is necessary.If the hot air temperature is 38~40 oC, the bursting rate is less than 2%.The bursting is not only related to the hot air temperature, but also to the initial moisture content of rice.

Place of Origin: Zhejiang, China Brand Name: KinCony Model Number: KC868-H4B Theory: Electromagnetic Relay Usage: AUTO Size: Miniature Protect Feature: Sealed Contact Load: High Power Security Channels: 4 Relay Control Channels: 4 Communication Port: Wifi+Ethernet+RS232 Max Current: 10A/Gang Network Control Mode: LAN (Local:Withour Internet) OR WAN Supporting Programmable Control Mode: CS & BS Provide Control Sample Source Code: C++, VB, Delphi, Python, iOS, Android Technical Support Mode: Email, Telephone,Teamview Provide Communication Protocol Documents: Yes Product Video Instructions: YouTube

Product name:Planter Type 2BCYF-3   2BCYF-4   2BCYF-5    2BCYF-6 Drill depth(mm) 30-50 Empty hole rate of seeds(%) 2%  2%  2%  2% Sowing seeds quantity(pc/hole) 1--3 Productivity(ha/h) 0.2-0.3   0.4-0.5  0.65-0.85  0.8-1 Weight(kg) 180   240   320   420 Rows 3   4   5   6 Theoretical rows spacing(cm) 15.24, 19.05, 5.4, 30.48 Fertilizer depth(mm) 60-80  60-80  60-80  60-80 Capacity of fertilizer tank(L) 16*3  16*4  16*5 16*6 Capacity of seeds tank(L) 9*3  9*4  9*6  9*6 Matched power(HP) 12-30  20-50  30-60  50-80

We have various agriculture machines. Like drones for spaying, sowing seeds, etc. For more informations, contact me.

Detail information of exhibits Item NO.BOP962892 DescriptionB/O bubble mower (2 x 59ML ), not including 3 x AA batteries Package:Color box Qty/ctn:12pcs Inner Box:0 Packing Size:290 140 300mm Carton Size:440 570 620mm G.W/N.W:12/10.3kgs Test Report:ASTM,HR4040,EN71,7P,EN62115,EN60825 Including battery or not:3AA not including Product features : 1. Soft lights flash, colorful, fun and more fun 2. High foaming rate, anti-leakage, not easy to break 3. Easy to disassemble, safe, environmentally friendly and non-toxic

Spreading the manure manually in orchards and vineyards is tediously difficult. the high tech, mechanized orchards & vineyards manure spreader by Yash AgroDrive makes spreading of manure efficiently easy in much lesser time. Its smaller size is specially designed to usage between narrow rows. Manure is localized on the foot of trees, with an adjustable spreading length from 1to 9 feet. To enter or exit to the row, the machine is equipped with steering mechanic rudder to reduce the operating space (to follow tractor track) it facilitates the spreading of any type of organic fertilizer like Manure, Compost, digestate, vegetable waste etc. Moreover, it also enables adjustable manure spreading for the manure quantity. Suitable for 6 ft. distance between two narrow beds. Specific to use between two narrow rows for orchards and vineyards. Manure is localized on the foot of the tree, with an adjustable spreading length from 1 to 9 ft. Easier to enter / exit in even or odd rows of the orchards and vineyards. Used mechanical steering rudder. Manure spreader with rigid structure. Hydraulic conveyor chains with adjustable speeds.

Yash AgroDrives Self Loading Open Land One Side Discharge Muck Spreads from Upper Outlet. Use Tractor Hydraulic System, Cost Effective, Low Maintenance, and Small Compact Muck Spreader ( 1.2. Wide X 1.2m High X 2.0m Long) Suitable for Small Holders and Farmers , Simply Load Up Your Muck and Spread Without Leaving Cab, Strong Durable Design Will Throw Sticky Dung 1 6 Ft. f rom the Tractor. Spreads Dry muck or Manure at 540RPM Simply load up your muck and spread over Acres Strong Durable Design for open land manure spreading. Will throw dry dung 1-6 ft. from tractor Capacity 300 kg Will also spread Sand, Peat, Wood bark etc. 34+ minimum HP tractor required. Cost effective & Low Maintenance. Small compact muck spreader suitable for Small Holders and farmers.

Yash AgroDrive Fertilizer Broadcaster is a modern technology implement designed to spread fertilizers with greater ease and efficiency. While the traditional method of spreading fertilizers with hands was more laborious, time consuming and health hazardous. This modern method designed by us is less time consuming and more comfortable and also it does not present any threat to health. It can spread fertilizers in large portions of land in real time. It allows the operator to spread fertilizers in larger land portion in lesser time. It promises uniform spreading of fertilizers which improves organic structure of the land. Faster operation saves time and power consumption. Suitable for professional users, specific for fruit yards, vineyards and orchards due to its targeted side discharge.

Functions and Features This equipment can complete the cleaning, dehulling, shells-removing and seed-kernel separating of sunflower seeds at one time, and its the optimum choice for sunflower kernel processing industry in the world today. It features high dehulling rate, high percentage of whole kernels, high automation degree, easy operation and maintenance, etc. Component  input hopper spiral elevator multi-functional cleaner bucket elevator main part of the equipment(dehullers, air separator and seed-kernel separator) pneumatic system of back-flowing materials seed-kernel re-separator1 seed-kernel re-separator2¨kernels Technical Parameters power:20.24KW (380v) input capacity:0.8-1.25mt/h % of whole kernels 90% min. % of inshell in kernels:5% max. overall dimensions:13.1mx2.92mx5.4m

It can process both green silage corn stalk n yellow corn straw. Different from traditional hay cutters, it can cut straw and increase refinement so that the fermentation area of straw forage is greatly enhanced and improve the efficiency of crude fiber decomposition. It's one of the most preferred machines for the sustainable development of animal husbandry.

The rotary cutter used has strong adaptability to forage grass, especially suitable for dense, lodging and tangled grasses, stable work, high productivity.

Cattle manure vehicle, 490 / 4102 / 4105 diesel engine, forklift CVT (Continuously Variable Transmission). Full hydraulic control, feeding by spiral lifting, dry or thin manure can be applicable , 5 cubic stuffing-bins, manure cleaning and transportation can be done by this one-in-all machine, which is specially designed for cattle farm, convenient and fast, labor and time saving.

Application: It is mainly used for crushing straw, wheat straw, peanut seedling, sweet potato seedling,stalk, cotton straw, bean straw, corn straw, grass, seaweed and various branches, etc. The shredder is a multi-functional machine that can directly enter the rotary cutter to crush the bundled materials. The machine can cut the materials by rotating the blade. The output is high. The fresh and dry materials can be directly chopped, and the performance of the machine is stable and reliable. Bale shredder features: 1. The rotary table can store a large number of materials and realize intermittent feeding. 2. The inner disc of the rotating disc is designed with a damping plate, which can hold the bale and rotate it, so the cutting efficiency is high. 3. High chopping power. 4. Breaking in bundles, saving more human resources. 80# Bale shredder No. Item Parameters 1 Dimension: L*W*H 3*1.8*2.3m 2 Upper rotating cylinder dia. 2.3m 3 Lower rotating cylinder dia. 1.5m 4 Matched power of motor 22Kw four-pole motor or four-wheel drive 904 model tractor 5 Productivity 3-5t/h 6 Straw rubbing filament length 3-5cm

It can support smaller horse power tractor n can collect and bundle wheat straw, rice straw, pasture, Alfalfa straw and corn straw after crushing at one time. Fully automatic bundle - releasing equipped with hydraulic fuel pump and one can operate with ease.

The product can directly put silage, various bales, straws and other fibrous feeds into the mixer to cut, mix, and mix quickly. Various specifications (5-20 cubic meters) can be customized according to the needs of the pasture. The cutting and mixing time of each batch of feed is about 30 minutes. According to the different volume of the box, each feed mixer can feed 200-2000 cows a day, which can replace the work of more than 20 workers, reduce the labor intensity of workers and improve the feeding efficiency. Model: 9TMRW-12 Dimension: (Length*Width*Height) 5600*2200*2500mm Auxiliary Power 2 * R147-22kw Working efficiency: 7000-8000Kg/h Total Weight: 5500Kgs Shaft speed 18r/min Qtt. of blades: 21 units

Application: Straw kneading machine can rub and cut rice straw, wheat straw, peanut and sweet potato seedling, green and dry weeds, corn straw, cotton straw, thorns, branches, all kinds of bark and other materials can be well adapted to the kneading and crushing of dry straw and green straw at the same time. The processed forage has soft texture, fine crushing, good palatability, high intake, and easier chewing The machine adopts double power control system: the main shaft rotor is directly driven by 11 - 18.5kw motor through the belt pulley and V-belt, which is responsible for cutting and rolling the straw; the 2.2kW motor drives the feed roller through the cycloid pin wheel reducer, belt pulley and belt, which is responsible for the flattening and feeding of straw. 2.2kW motor is controlled by steering switch, which can realize forward and reverse rotation. Feeding and kneading do not affect each other, so the driving rate is high, the production efficiency is high, and the kneading effect is good. Main technical parameters: Model: RC-8 Rate of straw filament: >=90 (maize stalk) Efficiency: 5 t/h (green silage moisture content 55-65%) 2 t/h (dry hay, moisture content 14-22%) Main shaft supporting power: lower spray: 18Kw, higher spray: 22Kw Length of straw filament: 10 - 180mm Reducer or reduction motor: 1.5Kw Working voltage: 380V Rotor spindle speed: 1650 r/min. Throwing height: 6m Trowing diameter: 550mm Throwing horizontal distance: 5m Overall weight: 700Kgs (without motor or diesel engine) Dimension: (Length*Width*Height mm) 2650*1100*2300

Application: The horizontal hydraulic packer is mainly suitable for packing corn straw, sugarcane leaf, straw, wheat straw and other straw feed, reducing the volume, facilitating long-term storage, transportation and less storage space; the equipment has become the ideal equipment selection for processing corn silage feed of breeding companies, straw processing cooperatives, individual farmers, etc. This product is designed with high-tech mode and humanization. The machine is controlled by Siemens PLC in Germany. The hydraulic pressure is made of national standard parts and durable. With the demand of the market, it is constantly updated to meet the customers' need. This machine can move in a small range. If the power supply is not convenient, it can work with a diesel engine. It is necessary to crush corn straw, or other high-grade straw, or process it after rubbing and chopping. It can suppress straw, grass, dry corn straw, straw, wheat straw, all kinds of straw fragments, or other floating materials, Baled and packed automatically. The dry straw is stored about 30 kg per yellow bale and the green straw is stored about 65-75 kg/bale. Parameters: Model : YZ3-220XB Main dimension: 2750*2600*2300 Loading dimension: 2750*26500*2300 Auto-weighing device: Available. Outlet size: 350*350 Packing efficiency: est. 3.5 t/h Rated voltage: 380V Auxiliary power: 22Kw - 4P Inner diameter of packing cylinder: 160mm Inner diameter of pressing cylinder: 200mm Inner diameter of pusher cylinder: 200mm Hydraulic tank capacity (L): 500 Air filter: 50 Hydraulic oil: 450Kgs Net Weight: 4.8T not including optional spares Main structure: Main machine, mobile trailer, automatic feeder

Application: The product can directly put silage, various bales, straws and other fibrous feeds into the mixer to cut, mix, and mix quickly. Various specifications (5-20 cubic meters) can be customized according to the needs of the pasture. The cutting and mixing time of each batch of feed is about 30 minutes. According to the different volume of the box, each feed mixer can feed 200-2000 cows a day, which can replace the work of more than 20 workers, reduce the labor intensity of workers and improve the feeding efficiency. Model: 9TMRW-5 Dimension: (Length*Width*Height) 4300*1700*2200 mm Auxiliary Power 137-15Kw Working efficiency: 1500 - 2500Kg/h Total Weight: 2700Kgs Shaft speed 18r/min with the help of belt conveyor, the grinded straw will be delivered into the electric feed spreader, specification: Model: XL-3 Capacity: 3m Power: VRLA or lithium batteries 72V Dimension: 3350*1400*1950mm

This combined machine is capable of harvesting, crushing and silage fermentation wrapped grass, crop straw or separately harvesting, chopper and packaging the maize stalks and green forages. It's mainly divided into three divisional devices : Chopper, Baler and Green Silage Wrapper. This machine is driven by qualified tractor by a way of a smart intelligent two wheeled trailer, the raw materials are crushed first, then bundled by rope or net mesh tightly and wrapped under the lifting turn-table by silage specialized protective coating in the end. Model: 9YQ-1720 Power matched: more than 70HP Working range: 1720mm Speed of rotary roller: 300 r/min. Bale's dimension: Dia.*Length 600*700mm Working efficiency: 6 - 8Mu/h (4000-5333/h) Qtt. of rotary roller: 15 units Overall dimension: 3270 * 2150 * 1400mm Weight: 1300Kgs

1. Feature: This machine is a high-efficiency and energy-saving rotary cutter hay cutter with novel structure, stable operation, freely movement, energy saving, easy operation, convenient maintenance, safety and durability, even cutting and other features. It is suitable for cutting all kinds of forage or medicinal materials, such as green grass, hay, corn straw, corn straw, peanut seedling, sweet potato seedling, etc. It is a necessary mechanical equipment for farmers and small , medium-sized feed processing plants in rural areas. It can also be used in agricultural and pasture areas, paper mills and medicine factories. 2. Main mechanism: Feeding mechanism, chopping and throwing mechanism, power transmission clutch mechanism and frame, traveling and protective device, etc. 3. Main technical parameters: Model: ZC-8 Matched power: 11Kw Cutting length: 5-80mm Efficiency: 7000 - 10000Kg/h Blades Qtt.: 3 Weight: 660Kgs