Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Model: CM8825FN In built probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: í+1-3%n or í+2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45íµ(32¿H-104¿H),í_90%RH Dimensions: 126x65x27mm weight: 81g(not including battery) Optional accessories: other range 0-200um to 15000um RS-232C cable & software: 1.USB adaptor for RS-232C 2.Bluetooth interface.
It could test the surface field of permanent materials and working magnetic field of dc motor, amplifier, magnetic separator and permanent de-ironing separator. It also could be used in the measurement of remnant magnetism of mechanical processing, magnetic polarity, remnant demagnetizing field of products, to control the magnetic condition of Electroplating staffs and test the motor magnetism, leakage of electromagnetic field and ac space field. Main features 1. Small and light, easy to take, could meet all kind of on-site test requirements. 2. Power down automatically when no operation over 40 seconds.Lower voltage indicate.Super low power consumption design.It could be used more than 80 hours continuously. 3. Dc or ac peak hold 4. Dc and ac magnetic field, two range 0-200mt, 0-2000mt. 5. Dc field polarity judgement function. 6. One-click quick automatic zero adjustment. 7. Users can select the transverse and Longitudinal probes accordingly. Power 9v laminated cell inside Display 3.5 digits lcd Test range 0~~200mt, 0~~2000 mt Basic error: ~{!@~}1% Resolution Dc~{!a~}1 range: 0.00~~200.00mt, resolution: 0.01mt Dc~{!a~}10 range: 0.00~~2000.00mt, resolution: 0.01mt Ac~{!a~}1 range: 0.00~~200.00mt, resolution: 0.01mt Ac~{!a~}10 range: 0.00~~2000.00mt, resolution: 0.01mt Ac magnetic field frequency range below 400hz Temperature error -0.06%/~{!c~}c Operation environment Temperature : -10~{!c~}c~~40~{!c~}c, humidity: 35~~75% Probe interface 5 pin socket 0.5 kg . Plastic package l 150 x w 70 x h 25 mm
Use for power supply. Packing of 10 piece.
As per requirement As per requirement
Manual operation to microprocessor operated testers from 0-60kV, 0-80kV, 0-90kV and 0-100kV.
SFY-60A SFY infrared moisture meter Product attributes 1.Small in size and light in weight 2.Rapid and accurate in detection 3.Easy to operate 4.Red numeral tube used in the displaying instrument 5.Widely used 6.Available to computer and printer connection Our Products SFY infrared moisture meter is a new,rapid moisture detecting instrument based on thermal gravimetric theory While sample products are weighed by infrared moisture meter,the meter is Infrared Heating Unit and Water Evaporating Channel dry the sample products rapidly.During the process,moisture meter continuously measure and display the moisture content lost by the samples.The final numerical value is fixed and showed after the dry process is over.Compared with the traditional oven heating approach,nfrared heating has the advantage of achieving the maximum heating power within the minimum time span.Samples are dried under high temperature,which quickens the detecting time generally,a sample is moisture value is detected within several minutes.It is accurate in detection and easy to operate.Its displaying part is a red numeral tube with clear displaying results.The moisture meter can respectively display enumerated date of moisture,sample is initial and terminal data,detecting time span and temperature is initial and terminal data.Furthermore,the equipment is easily available for connection with computer and printer.Hence,SFY infrared moisture meter can be applied widely in most products which requires rapid moisture detection,ncluding medicine,cereals,seeds,tobacco,chemical,tea,food,meat textile and etc as well as in laboratory and manufacturing process in fields like agriculture and forestry,paper making.plastic or rubber making,textile and etc. Product is technical target: Weighing capacity:Generally:0~60g Specifically0~100g Minimum reading:0.002g Moisture readable: 0.01% .
We are offering eut monitoring system that includes eut monitoring, analysis and data recording. These eut monitoring systems analyzes data during the test for interference or failure conditions, and records test data for retrieval after the test is complete. It is designed as a stand-alone system to communicate with the main test system using our eut monitoring and test software. The eut (equipment under test) monitoring system combines the following: Monitoring instrumentation Video and audio equipment Software to provide eut signal monitoring (analog and digital) Eut stimulation Monitoring for visual or audio interference during testing The monitoring is enabled only after the test level is established with the main test system, since the EUT Monitoring System is fully synchronized with test system. These are appreciated because all parameters captured by the EUT Monitoring System during testing ensures to accurately recreate interference or failure points to resolve compatibility issues monitored. These systems are configured specifically to cater the test needs and can be configured for specialized requirements such as audio breakthrough required by mobile radio standards and ABS/TCS testing needed in automotive test standards. Our entire range of standard as well as customized seamless interface with main test system completes the control of the EUT Monitoring System from the control room console. System Components: EUT stimulation and monitoring instruments selected to cover applicable specifications and meet your price/performance requirements Video monitoring system using shielded color cameras to visually monitor equipment under test An audio monitoring system can supply as a stand-alone solution or built into the video camera system A system controller with application software that offers power to control monitoring equipment These are used to process and store data, graphics, and results of series measurements System cabling and switching to connect the control room with the chamber Shielded room allow test engineers complete control of the EUT monitoring system from the desktop Fiber optic links for analog and digital signal monitoring. We are offering Radiated Conducted EMS that is used for EMS Testing Many electronic products. The subassemblies must meet immunity testing requirements depending on the product's target marketplace. These are designed specifically to meet the requirements of specific environmental use and internal manufacturer's requirements. It also needs an engineer to control instrumentation from a variety of vendors and perform detailed test procedures for numerous specifications. These are known for integrating test instrumentation, system controls, positioning devices, and software to perform automated, semi-automated, and manual immunity measurements in an anechoic chamber, shielded room, or test cell. The range of test specifications is carefully evaluated to develop an integrated test environment covering the basic, generic, product family and product specific standards. The entire recommendation is based on proven system installations, in-house research and development, and extensive experience with dozens of test instrument suppliers. It result in a seamless interface the test system and the test environment. We are offering a range of Radiated Conducted EMI that is designed and manufactured to use in an anechoic chamber, shielded room, OATS, or test cell to perform automated, semi-automated, and manual emissions measurements. These systems are integrated with test instrumentation, system controls, positioning devices and software. This helps to test specific products or subsystems for electromagnetic emissions according to international, R&D and manufacturer-specific standards. Designed especially to meet customerÆs requirements, these receive the exact system solution. This is offered without unnecessary components and costs associated with off-the-shelf, "one size fits all" test systems. Further, we also offer turnkey solution for our Radiated Conducted EMI, which includes system designing and installation with dozens of test instrument supplies. The turnkey EMI Test System designed by us assist to meet product testing requirements. A typical system includes: EMI test instrumentation selected to cover applicable frequencies and meet your price/performance requirements. Antennas/LISNs/Clamps selected to match both test standards and test facility capabilities. Measurement Accessories such as switching and positioning devices that simplify control and increase efficiency. An EMI Main Control Console with instruments and system controls strategically placed to provide test engineers easy access to all functions, and a comfortable, ergonomically-correct work environment. A System Controller with Application Software that offers state-of-the-art power to perform emissions tests from pre-scan to final measurements and to control multiple EMI analyzers and receivers. Proven Solutions: Our test system developments are based on the systems in Europe, North America, and Asia. Each new system incorporates the latest technologies instead of an off-the-shelf approach to design and to explicitly cover the standards. It provides accurate, repeatable measurements and minimizes demands on your limited resources. We are offering Observation System that is appreciated by the clients for conforming to various international quality standards. These are known as Specific Absorption Rate Test Systems (SRC), which include SAR Measurements, System Components, Measurement System, Probes & Measurement Accessories and Position Controller & Positioning Robot. The detail description of Specific Absorption Rate Test Systems is as follows: The SAR System: It is used to measure electromagnetic fields and calculated SAR over a customer-specified frequency range. All tests are conducted in a shielded test room. SAR Measurements: SAR testing works with the thermal effects of human exposure to RF electromagnetic fields. It corresponds to the relative amount of RF energy absorbed of a device close to the body. The test is conducted to verify that the RF energy emitted by a device is within permissible limits for public exposure as defined by test standards. The SAR Measurement System is comprised of the following subsystems: Measurement System: It is an easy to use, flexible package optimized for dosimetric evaluation of radio products. The whole package includes Data Acquisition Electronics and system control computer. Probes and Measurement Accessories: Various broadband probes and support accessories are available based on test requirements. It includes probes to measure current distribution on radio products in free space, to measure fields inside fluids simulating body tissue and to test radiated emissions from mobile radio equipment. Position Controller and Positioning Robot: The automated robot positions the probe inside the tissue-simulating liquid over a precisely defined volume. The robot is controlled by a multiprocessor positioning device. Air tieght packing with container, steel packing, wooden packing
Electrical switch gear.
Application: for fuel cell stack and the MEA testing and simple analysis Input channels: 8CH, signal: 0 - 5V Output channels: 4CH, signal: 0 - 5V Sample input voltage: 0 - 50V Sample input current: 0 - 100A System error: í_ 0.4% F.S. Minimum recording interval time: 0.05 s Time accuracy: í_ 0.1% Environment requirement: 0 - 40 íµ Environment humidity:
JPF2 fixed type metal-enclosed switchgear assembled from modular elements of SF6 insulated switch-disconnector, SF6 switch-fuse combination or vacuum circuit-breaker, in compliance with IEC 298, IEC 420 standards. It is suitable for switching of load current, and controlling the network. It is widely used in medium voltage public distribution systems, high/low voltage prefabricated substation and ring main units. Ratings Rated voltage (kV) 24 Rated bus bars current (A)630 Rated feeder current (A)630 Rated peak withstand current (kA)50 Rated short-time withstand current 2s (kA)20 Cubicle dimension W375(500, 750)*D900*H1900
JPU1-12 Medium Voltage SF6 ring main unit (SF6 RMU, Abbreviation), with the character of excellence reliability and maintenance free, is suitable for AC 3.6 to 12kV power distribution system with configuration either ring or radiant. Its all live part including LBS, CB, ES and primary busbar are sealed in the tank made of stainless steel and the elbow-shape cable connectors are adopted for the incoming or out-going, that leads to the RMU has less influence from service condition therefore it is suitable for using in the bad ambient condition and relatively restricted space. Its service life is more than 20 years. JPU1-12 is compliance with IEC 694, IEC 60265-1/FDIS, IEC 62271-100, IEC 62271-102, IEC 298 & IEC 420. Ratings Rated voltage (kV): 12 Rated load current (A): 630 Rated fuse current (A): 100 Rated breaking current (kA): 50 Rated peak withstand current (kA) 125 Rated short-time withstand current (kA)25 PFWV (kV): 42/48 BIL (kV): 76/85 Cubicle size (mm): W (various)xH1570XD800 Veneer packing
Product Description GG-1A(F) Mistake-prevention high voltage switchgear is made out of the stationary high voltage switchgear by adding the mistake-prevention locking device. It can be applied to the 3. 6-12KV three phase and 50Hz single bus bar system for electricity reception and distribution. It is a stationary indoor type.
Product Description GGD AC low voltage distribution cabinet has the high ability of segmentation, good thermal stability, agile electric project, convenient combination, high protection class, the frame is built-up by the cold bend steel, the original, such as door, sub panel, louver, sideboard and so on, are all machined by the numerical control machine tool. It ensured the strength and precision of the body of the cabinet. The surface of the cabinet adopt the skill of electrostatic painting, so it has the characters of the high ability of corrosion, good appearance, and it accord with the request of the IEC439, GB7251. Major Technical Data: Rated voltage: 380V Rated frequency: 50HZ Rated current 400-3150A Altitude: More than í¦2000m Spec: GGD-1: 15kA GGD-2: 30kA GGD-3: 50kA.
Product Description XGN2-12 Trunk stationary metal sealed switchgear (hereinafter called switchgear) is used in the distribution system of 3. 6-12KV three phase 50Hz for electricity reception and distribution. It is especially suitable for the place where the operation is running frequently. Its bus bar system has the structure of single or double bus bar. We can also supply the type of insulation strengthened products according to the requirements of customers. This switchgear is in accordance with the standard of 'GB3906 3-35KV Metal Closed AC Switchgear' .
12PSB-HTD Main function: 1. Oil supply quantity and equality in every cylinder of oil injection pump 2. Oil supply point and space angle of oil injection pump 3. Check and adjust timing machine performance 4. Test and adjust dispensing pump performance 5. Test and adjust pressure compensator 6. Measure oil back quantity of dispensing pump 7. Test electromagnetic valve performance of dispensing pump 8. Test inner pressure of dispensing pump under all kinds of rotate speed 9. Test advance angle of automatic advance machine (selective) 10. Test leakproofness performance oil injection pump 11. Connect draw oil supply pipe to examine input oil pump (ve pump) 12. High precision test journey (selective) Dimension:2300x820x1800 Wood packing
ASN3-12 air-insulated metal-clad enclosed switchgear is a new mv switchgear on the basis of introducing advanced techniques from foreign, abstracting our experiences in manufacturing the center located switchgear and assembling the world top class numeral controlled equipments. It is major used in 3.6~12kv 3-phase ac50/60hz power system to receive and distribute electrical power. Also it is used to control, protect and monitor the circuit. 1.The surfaces of conductors in the primary circuit are all disposed with vulcanization process. Thus the insulation lay have the characteristic of good attachment, high temperature endurance and even surface comparing with the static electricity process. 2.The frame is made of aluminum-clad zinc board together with rivet nut and high strength bolt. 3. Can be fitted with vn3 series center located high voltage ac vacuum circuit breaker. 4. With the function of manual urgent open switch, the operation is more convenient. 5. Equipped with new ek6 earthing switch, which make the operation convenient and the maintenance easily. 6.All switch operation is proceed with the door of high voltage compartment closed. Also the switchgear has the function of forcible closing the door and the safety is higher. The door can endure the inside fault current.
ASN2-24 air-insulated metal-clad enclosed switchgear is a necessary power distribution equipment in 24kV 3-phase AC50/60Hz power system. It is used in power generator, substation, factory and high building as a equipment of receiving and distributing electrical power. Also it is used to control, protect and monitor the circuit. The switchgear accords with the standard of GB3906, DL/T404 and so on. 1. Busbar is covered with shrinkable insulated material or disposed with epoxy, which make the electrode improved and the body of the switchgear compact. 2. The frame of switchgear is made of top quality aluminum-clad zinc plate through rivets and has characteristic of higher strength, rapider assembled efficiency and more artistic appearance. 3. According to functions the trolley can be divided into circuit breaker trolley, voltage transformer trolley, metering trolley, isolation trolley. The same kind trolleys can be exchanged freely. 4. Can be fitted with VN2 series center located high voltage AC vacuum circuit breaker. 5. There are clapboards between function compartments and individual pressure relief passage. 6. The instrument board is with applicable inclined angle so the operation and observation are more convenient. 7. The instrument compartment is a knock-down module, which not only improve the prettiness and safety of secondary wires but also make the maintenance and overhauling more convenient.
2402n-315 differential case 2402n-415 intermediate differential carrier 2402n-331 differential cross 2402n-335 semi-shaft gear 2402n-345 differential pinion
GZS1 Type of indoor metal-clad draw-out switchgear GZS1 indoor metal-clad draw-out switchgear, developed by Shanghai Dahua Electrical company, is suitable for use in AC. 3.6 ~ 12KV, 50Hz,single-busbar or sectioned single busbar switchgear, mainly used in Elec. generating plants, middle / small power stations, power distributing system of enterprises or industries or substations as Elec. power receiving or distributing equipment or big-power H. voltage motor starting equipment, and so on. The switchgear has functions of control, protection and monitoring
The following is the feature of the meter shell: Overall dimensions:281x180x98 Installation dimensions:255 x90.5 1, Bottom case is made of ABS-V0, or ABS-PC(UL94) 2, Upper cover(front cover) is made of PC-V0 3, Lower cover and window is made of PC-V0(UL94) 4, Nameplate is made of 0.5mm Aluminium or PC-V0 or ABS-V0(UL94) 5, Terminal housing is made of bakelite 6, Terminals is made of brass for 1.5-6A,10-40A,20-80A,or on request 7, Signal terminals No. - 2pcs-6pcs are available on request 8, short or long terminal housing cover is available 9, RS232 optical port available on front cover Standard export carton package
