Lmk3 range of current transformers can be applied to test, control, display and record the running of the electrical equipment, And to protect the equipment against the damage, in the ac circuit with the rated voltage value below 720v and the frequency of 50-60hz. The product can be also applied to form a complete set of mine transformer Features: 1:safe, easy to install, portable 2:wide inner window, allowing clamping of big cables or bus-bars 3:wide range of sizes to accommodate all the existing installations Applications: 1:current measurement, monitoring and protection for electrical wiring and equipment. 2:current and power measurement for electric motors, lighting, air compressor, heating and ventilation system, Air-condition equipment and automation-control system. 3:current, power and energy monitoring device. 4:relay protection device
Rlc range of current transformers advanced snap on body, high accuracy (up to class 0.2s), Humanization transparent cover and lead seal holedesign makes the ct very easy to indentify after long term use , And perfect anti-stealing electricity. Feature: 1:built in hinged terminal cover 2:built in transparent cover for name plate 3:wide range accuracy (3, 1, 0.5, 0.5s, 0.2, 0.2s) 4:primary current from 5a to 5000a.Enables meet the worldwide requirement. Applications: 1:current measurement, monitoring and protection for electrical wiring and equipment. 2:current and power measurement for electric motors, lighting, air compressor, Heating and ventilation system, air-condition equipment and automation-control system. 3:current, power and energy monitoring device. 4:relay protection device
Applicable Standards: IS, IEC, ANSI, JIS, BS, DIN, ETC. TRANSFORMER OPTIONS: Cooling Tubes / Radiators / Corrugated Tanks Pole Mounted / Ground Mounted Free Breathing / Hermetically Sealed CSP / Non CSP Winding-Copper/Aluminium (Foil / Rectangular Wire / Round Wire) Fittings and Accessories, Cable Terminations etc.as required Standards: MUSKAAN’S transformers are designed and tested as per IS : 2026, BS - 171, IEC - 76 & IEC - 726. Vector Group: Transformers will be connected as per vector group reference Dyn11. Other vector groups can be offered as per specific requirements Terminal Arrangement: H. V. - Bare Bushings or Cable Box, L. V. - bare bushings or cable box. Disconnecting chambers can also be provided on both HV and LV Cable boxes. Temperature Rise MUSKAAN’S transformers are designed for a maximum temperature rise of 40 / 50 degree C of oil / winding. Lower temperature rise can be offered on request. Other Information Minimum Order Quantity: 1 Unit(s)
Applicable Standards: IS, IEC, ANSI, JIS, BS, DIN, ETC. TRANSFORMER OPTIONS: Cooling Tubes / Radiators / Corrugated Tanks Pole Mounted / Ground Mounted Free Breathing / Hermetically Sealed CSP / Non CSP Winding-Copper/Aluminium (Foil / Rectangular Wire / Round Wire) Fittings and Accessories, Cable Terminations etc.as required Standards: MUSKAAN’S transformers are designed and tested as per IS : 2026, BS - 171, IEC - 76 & IEC - 726. Vector Group: Transformers will be connected as per vector group reference Dyn11. Other vector groups can be offered as per specific requirements Terminal Arrangement: H. V. - Bare Bushings or Cable Box, L. V. - bare bushings or cable box. Disconnecting chambers can also be provided on both HV and LV Cable boxes. Temperature Rise MUSKAAN’S transformers are designed for a maximum temperature rise of 40 / 50 degree C of oil / winding. Lower temperature rise can be offered on request. Other Information Minimum Order Quantity: 1 Unit(s)
copper Aluminum 1455
We are regular suppliers for all kind of plastic and metal and we ship to any destination port worldwide on CIF basis. interested buyers should contact us for more details and quotes
Distribution board is also called a panel board, breaker panel, electric panel or DB box. Its main function is to divide the electrical power evenly among all the electrical devices. The primary functions also include power generation, transmission and distribution.
TRANSFORMER
TRANSFORMER
Our dry-type transformers, also known as "dry transformers," are designed to provide efficient and reliable electrical power distribution. These transformers use air or resin as the cooling medium instead of traditional oil. This design minimizes the risk of environmental contamination and allows for safe operation in various settings. Key features of our dry-type transformers include: 1. **Safety and Environmental Friendliness:** As there is no oil involved, the risk of fire and environmental impact is significantly reduced. This makes them a safer and more environmentally friendly option. 2. **Versatility:** Dry-type transformers are suitable for a wide range of applications, including industrial facilities, commercial buildings, and residential areas. They can be customized to meet specific voltage and power requirements. 3. **Low Maintenance:** These transformers generally require lower maintenance compared to oil-filled transformers, resulting in cost savings over their lifecycle. 4. **Compact Design:** The absence of oil allows for a more compact and lightweight design, making them easier to install and suitable for locations with space constraints. 5. **Efficiency:** Our dry-type transformers are designed for high efficiency, ensuring minimal energy loss during power distribution. Whether for upgrading existing infrastructure or implementing new projects, our dry-type transformers are engineered to deliver optimal performance, reliability, and safety in diverse electrical applications.
Distribution Transformer _ 3 phase _ Capacity : From 50kVA to 5000kVA _ Voltage up to 35kV _ Frequency : 50-60Hz _ Conducting Material : Copper or Aluminium _ Insulation LiQuid : Mineral Oil
Texol Transformer Oils are manufactured from carefully selected New Generation Right Base Oil with emphasis on product purity at every stage of refining. They pass through 3 stages of purification. They are manufactured to meet the following specifications: â?¢IEC 296 â?¢IEC 60296: 2021-02 Edition 4.0 Application: They have excellent cooling efficiency, long life, better insulation properties, reduced corrosive Sulphur and aromatic contents, can withstand extreme climatic conditions. PRIVATE LABELLING OF TRANSFORMER OIL IS PART OF OUR CORE BUSINESS
INTRODUCTION: SPIKE SUPPRESSOR: 1. Better temperture stability 2. Excellent impedance-frequency characteristics 3. Outstanding resistance to unbalanced current 4. High saturation magnetic induction intensity-effectively reduce the size of common mode inductors APPLICATION: 1. Inverter circuit 2. Inverter 3. UPS 4. Switching power supply 5. EMC filter inductor 6. New energy such as solar energy, wind energy
Application Current transformers can convert large currents into small currents in a certain proportion, thereby providing current for various instruments and relay protection, and isolating the secondary system from high voltage. This way can protect workers and equipment, can also simplifies and standardizes the manufacture of meters and relays. Advantagesï¼? In order to improve the current transformer precision, has to improve the magnetic permeability of current transformer cores. Compared with silicon steel core, nanocrystalline core has better magnetic permeability. Compared with permalloy core, the cost of nano core is lower. So nano core is the ideal material of current transformer. It is widely used in precision current transformer, zero sequence current transformer, medium and high frequency transformer.
INTRODUCTION: Due to different appearance, amorphous core include plastic Fe-based amorphous core and epoxy Fe-based wound amorphous core; According to the size, this Fe-based magnetic core is divided into high saturation amorphous beads and filter inductance iron cores. It can used in iron-based amorphous filter inductor and spike suppressor. COMPARE: 1.Plastic case color can change 2.Have better performance in electric car 3.There is a foam pad inside to prevent shaking FEATURE: 1.Suitable for many different high frequency products 2.Magnetic permeability can adjustable between 150-1200 3.High saturation magnetic induction 4.Low coercivity 5.Low core loss 6.ODM available
Application Current transformers can convert large currents into small currents in a certain proportion, thereby providing current for various instruments and relay protection, and isolating the secondary system from high voltage. This way can protect workers and equipment, can also simplifies and standardizes the manufacture of meters and relays. Advantages In order to improve the current transformer precision, has to improve the magnetic permeability of current transformer cores. Compared with silicon steel core, nanocrystalline core has better magnetic permeability. Compared with permalloy core, the cost of nano core is lower. So nano core is the ideal material of current transformer. It is widely used in precision current transformer, zero sequence current transformer, medium and high frequency transformer.
Jiangyin Spark XH-SCT-T24 Series split-core current transformer , Diameter 24mm , Max rated current 300A ,output 0.333V ,1.0% class ,UL list Features: Small size, low cost High secondary turns Secure locking hinge Features: Maximum continuous primary current 5A to 300AAC Current Ratio: 3000: 1 Output: 0.333 Volt or mA at rated current Accuracy: �± 1% from 5% to 120% of rated current Insulation Voltage: 600VAC Maximum Primary Voltage: 5000VAC(Insulated Conductor) Phase angle: Less than 2 degrees at 50% of rated current Frequency Range: 50 Hz to 400 Hz Operating Temperature: -15C to 60C. Leads: 4Foot(105cm), UL 1015, Twisted Pair, 0.34 mm2(22AWG) CE recognized, and RoHS compliant Output and leads can be customized
If the secondary voltage of the Transformer is a high voltage, it is called as Power Transformer. Makpower supplies power transformers which transform energy from higher voltage levels and to distribute this energy to lower voltage substations or directly to large industrial consumers.
200 Amp 3 ph Motorized Control Digital Variable Voltage Auto Transformer [Oil Immersed] [HSN CODE: 85044029] [Make: POWERSELECT] Technical Specification: Model: PS200A3POEM470V Rated Power: 150 KVA Input Voltage: 415 V AC 3phase�?�¸ (L - L), �?�±5% 50 / 60 Hz 4 wire / 3 wire No Load Current: Less than 1% of rated unit Output Voltage: 0 - 470 V AC 3Phase�?�¸, (L - L) �?�±10% 4 wire / 3 wire Output Current @470V: 0 - 200 Amp per phase max Variac Oil Qty: 250 L (Approx. +- 10 L) Recommended IS335 Reference Standard: IEC 61378-1 & IS 5142 : 1969 Voltage Variation: Motorized Operation with 10 kg torque AC Synchronous Servo Motor Servo Motor: 10 Kg torque AC Synchronous Servo Motor 220 V AC 1 ph. (Make: PowerSelect) Coil Construction: 1 Coils used in per phase of 200 Amp each rating Total Coils: 3 Coils used in unit each coil rating max 200 Amp Current Transformer: 3 nos. 200/5 Accuracy class 0.5% Protection: 3 pole MCCB on Primary line (Make: L&T) Enclosure IP Rating: IEC 60529, IP50 (Sheet Steel) with powder coated paint (Color: Siemens Gray) Connection Terminals: DMC molded bar insulators terminal Oil Drain: Oil Drain valve tap bottom of tank front sided Oil Level: Oil level indication front of tank with glass view Earth Terminals: Ground / earth terminals provided back sided Winding Wire: IS 12444, ASTM B-49 Pure Copper DCC wire Core Type, Grade of lamination: CRGO Laminated Core 30ZH100 Load : balanced load Service: Indoor Application Variac Dimension (LxBxH) and Wt (Kg): 24 x 38 x 60 (Approx) Net Wt: 450 Kg (Approx.) Gross Weight: 550 kg
Sub Merged Arc melting furnace transformers are manufactured in 3 phase system upto 12.5 MVA and Bank of 3 nos, single phase, transformers for higher than 12.5 MVA transformers.
