100% reliability in your agriculture irrigation HP Range: 7.5 - 60 Head Range: 12 - 325 Max. Discharge: 850 - 1750 LPM Dia: 128mm OD.
-Pump Technical data: Qmax:4m3/h Capacity from 1.5 to 2.5(m3/h) Total head to 214 to 28m -Motor: Power:0.37 to 2.2kw(Single phase) Power:1.1 to 3.0kw(Three phase) Insulation class:B Protection class: IP58 Maximum diameter:ª+93mm Highest temperature of liquid:35íµ Operating conditions Maximum fluid temperature up to +35íµ . Maximum sand content: 0.25%. Maximum immersion :80m. Minimum well diameter :4".
Pump Qmax:2.4(m3/h) Cable length:20m Capacity from 0.5 to 1.5(m3/h) Total head from 79 to 27(m) Highest temperature of liquid:35íµ Motor: Continuous service. Power:1HP(Single phase) 1.5HP(Single phase) Insulation class:B Protection Class:IP58
Application: For water supply from well or reservoirs. For domestic use,for civil and industrial application For garden use and irrigation. Technical date: -Pump Qmax:2.8(m3/h) Capacity from 0.75 to 1.5(m3/h) Total head from 135 to 38m -Motor Power:0.37 to 1.5kw(single phase) Insulation class:B Protection class:IP58 Maximum Diameter:ª+83mm Highest temperature of liquid:35íµ Operation condition: Maximum fluid temperature up to +35íµ. Maximum sand content: 0.25%. Maximum immersion :80m. Minimum well diameter :3.5".
3.5inch submersible pump
Diffuser is designed for matching with the ready made local 4/8" faucet, easy to install. Tough and durable construction. Higher oxygen dissolution rate and corrosion resistance. Prevent backflow and clogging. Material: 1. Diffuser cover:neoprene rubber, resisting against acid and alkali. 2. Diffuser base:abs Specifications: 1. Bore:4/8'' - thread, 3/8'' - air inlet. 2. Diameter:80mm 3. Height:40mm 4. Ventilation volume:0.08 ~ 0.10 m¦/min -
Features: 1. Lower noise:pressure pluses are the major noise source in blowers. The trundean roots blower design can efficiently reduce noise by approximately 5 db. 2. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 3. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
Features:: 1. Quietness:because of its submergibility under water, so there will be not much noise from the machine when in use. 2. No need of a silencer:because of its under water, the created noise will be very low, so there will be no need to do silencer. Under-water can mean space-saving. 3. Strong structure, be relieved:the direct connect between the motor and the blower can avoid the inconvenience of traditionally-done belt adjustment. 4. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 5. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
Features: !e superior combination of materials and a leak-free, seamless design. !e excellent corrosion resistant materials such as carbon, ceramics etc. !e designed with an emohasis on improved durability. !e excellent corrosion resistant. !e featuring enhanced reliability and safety. !e the series can be arranged with nema or iec standard motor. !e easy maintenance disassembly and assembly -
Vacuum pump improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences. Features: 1. Lower noise:pressure pluses are the major noise source in blowers. The trundean roots blower design can efficiently reduce noise by approximately 5 db. 2. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 3. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
Power:0.37kw 0.5 hp max.Flow:35l/min max.H:35m Inlet/outlet:1"*1" Packing:265*145*160mm G.W:5.25kg
100y series water pump is manufactured to be coupled to nema standard motors. This water pump is improved in the design especially for the impeller and diffuser, offering the following advantages: High head for single stage impeller and diffuser than the usual one so that similar performance is given by reduced number of stages. Axial thrust load on the motor shaft is obviously reduced leading to increased average life of the motor. The built-in non-return valve is easy to remove and to inspect. Cartons
Qdx small submersible electrical pump( all casing, Referred to as electrical pump hereunder)consists of three components, water pump, sealing and electrical motor. The motor is mounted on top of pump and divided into single phase and three phase asynchronous types. The pump is below the motor and divided into centrifugal impeller and worm casing structures. Double-face mechanic sealing is mounted between pump and motor. O shaped oil-proof rubber sealing ring is used at each stationary port as static sealing. Cartons
Etonm motor entered air pump(dc pump, mini dc pump, dc air pump) industry for 6 years, however, designed and developed 6 series of dc air pump, there are et-ap12, et-ap13, et-ap27, et-ap33, et-ap36, et-ap60. Every series has several types. Type: et-ap12 Voltage: 3v-6v Flow: 0.8l/min-1.2l/min Pressure: 300mmhg-560mmhg Noise: 60db max Design: drived by dc brushed motor Materials: plastic and rubber (may have mixture) Application: blood pressure monitor (bp monitor pump), massager (face, eyes, head, and waist massage), medical-care equipment and appliance.... We can customize the pump, if you have any question about the pump, please feel free to contact us, your inquiry will be welcomed. Carton and plastic pack
Kirloskar Openwell Submersible Pump Range : Head : up to 64 metres. Capacity : up to 31 litres per second. Power Rating : 2.2 KW to 7.5 KW. (3.0 HP to 10.0 HP) Application : Submerged pump in Fountains, Wells, Sumps and Water tanks. Water supply for domestic use in high-rise Apartments, Buildings and Hotels. Gardening and sprinkler/conventional irrigation. Industries, for clear water handling. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Withstand wide voltage fluctuations * Designed to prevent overloading and hence motor burning. * Long life : due to replaceable wearing parts. * Dynamically balanced rotating parts. * Easy maintenance and spares availability. Special Features : * Voltage range from 200 v to 440v * Design for underwater applications * Water shower arrangement for out of water applications * No need for priming or foot valve for submerged application * Foundation, installation or pump-house not required Material of Construction : Standard Supply : Impeller : Cast Iron. Delivery casing : Cast Iron. Motor Body : Cast Iron. Shaft : Carbon Steel. Optional Supply : Impeller : Bronze Shaft : Stainless steel.
Kirloskar end suction pumps type DB Range : Delivery size upto 150 mm Capacity upto 550 m3 / hr Heads upto 100 metres. Application : Suitable for Circulation of Water in Industries, Air-Conditioning Plant, Power Station, Mine Drainage, Lift Irigation, Sprinkler systems, Fire Fighting, Booster service, pumping brine, alkaline solutions, oils, benzene etc. for liquids having temperature in the range of -100 to 1000 C. Constructional Features : These are single stage, single suction, horizontal shaft type. They are made in accordance with DIN 24255. Models are available to operate at 1450 rpm and 2900 rpm at 50 hz and 1750 rpm and 3500 rpm at 60 hz. Material of Construction : Pump Casing and : C.I. / Bronze / Ph.Br. Casing Cover Impeller : C.I. / Bronze / Ph.Br. Shaft : Carbon Steel / St. Steel.
Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore Range : Delivery size upto 250 mm Capacity upto 950 m3/hr Heads upto 52 metres. Application : Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Direct or gear drive. * Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor. * Pump axis horizontal or vertical * Vertical pump, direct drive or with universal shaft arrangement * Highest reliability. Material of Construction : Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M Shaft - Carbon Steel / ST. Steel Other materials on request.
CE Pumps Constructional Features 'CE' pumps are dimensionally conforming to ISO:2858 and DIN 24256. These pumps are horizontal, radially split, single stage, centrifugal end suction volute with top centerline delivery. The pump feet are integrally cast with the Delivery casing. The Impeller is of an enclosed type. The Bearing housing is fitted with a support foot. The pump shaft is supported by grease lubricated antifriction ball bearings as a standard scope of supply. Models : Following models are available in 'CE' Pump series. Unit-30 --------- Unit-40 --------- Unit-50 32/20 ----------- 40/26 ----------- 25/32 40/13 ----------- 65/16 40/20 50/13 Application Of CE Pumps * Water supply * Fire Fighting * Sprinkling * Irrigation * Air conditioning * Brine * Light chemicals * Drinking water * Industrial water * Cooling water * Swimming pool water * Condensate * Hot water * Clear juice.
1. WOTAC air to water heat pump has been tested and designed in accordance with European standard EN14511. 2. Strong automatic defrost function. 3. Water flow switch inside for water flow protection 4. Can be used both heating and cooling 5. With the famous water pump inside 6. Uses World famous brand compressor. 7. Uses eco-friendly refrigerant R407c or R410a. 8. Stainless steel cabinet (Powder coated steel cabinet optional). 9. Air side fins heat exchanger with hydrophilic coating 10. LCD, Carel controller are both available. 11. Energy recovery exchanger inside for sanitary hot water is option. 12.With Kind of function such as: High Pressure, Low pressure, Over heating, Phase testing, Discharge Temp. etc. Heating Capacity:11.5KW~18.0KW COP: 3.5-3.9 Certificates:CE,CCC, ISO9001. Carton box or plywood
1. All in one design,install and maintain conveniently. 2. water and electricity system is completely separated, assure using safely 3.the water temperature is set freely within 30-55 4.with magnesium nod inside. 5.Intelligent control 6.Compact design with 200L/250L/300L available for option 7. Stainless steel tank inside, plus 50mm insulation 8. Refrigerant R407c and R410a are available for option 9.Automatic defrosting function included. 10.Electrical heating element inside as back up for emergent request 11 Stainless steel or other colors cabinet for option 12.50HZ and 60HZ are both available 13. The tank is available to have pipe coil inside for the external heating source, such as heat pump, boiler or solar system. Heating Capacity 2.6KW COP 3.4 Certificates CE,CCC, ISO9001. Carton box or plywood
