Electric fuel pump Cross referencetoyota: 23221-16490 Pierburg: 7.21088.02.0, 7.21088.05.0, 7.21088.06.0 7.21088.52.0, 7.21088.62.0, 7.00240.00.0 applicationtoyota Camry 95-00 2.2l /3.0l Carinae 92-97 1.6l /2.0l Celica 1993 1.8l /2.0l Corolla 93-97 1.6l /1.8l Paseo 1992 1.5l Rav.4 96-00 2.0l Tacoma 95-01 2.5l /2.7l 4.Runner 92-94 2.4l /2.7l/3.0l
The product has own advantage not only carry is convenient,durable,labor-saving,but also have been acquired ZBY 89001-88 international standard. It's used to all kinds of charge,such as bike,motorbike,car tyre,buoy,air bed,ball series etc.
Engine cc :below 1000-3000 Voltage :12 volts Operating Pressure :3.35 kgf/cm2 Flow rate : min. 80 lit/hr. Std. Lot size : 30 nos. Weight : 315 gms Dimensions : Overall diameter - 38 mm Height:118 mm.
Jet self priming pump Applications and features: Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc. Operating conditions: Type of liquid:clean water with no suspended solids or abrasive material Maximum liquid temperature_50¦ Maximum suction height_10m Maximum working pressure_10bar Performance range Flow rate up to 60 l/min.(3.6m3/h) (head up to 45m Operating limits (suction lift up to 10m (fluid temperature up to 60pc (maximum ambient temperature 40pc Carton
Apply scope (they are the same with household drinking water, miniature farming navigation for low water levels suburb or rural areas, high buildings and factroies, mines, enterprises, high reach water and long distance water. Introduction of framework (screw pumps are made up of machinery sealed parts with two ends of screw rubber stators, dry or horrent oil submersible electric engines, both electric engines and pumps adopt rubber or universal machinery linkers, no slot outside. Pumps installation and applications (qj submersible well motor pump is a complate set of equipment to puming water from deep-well.It is widely used for farm irrigation, water supply and drainage in factories and mines proving human being and animals with drinking water in plateau or mountain areas.
Applications and features: Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc. Operating conditions: 1.Type of liquid:clean water with no suspended solids or abrasive material 2.Maximum liquid temperaturef_50f¦ 3.Maximum suction heightf_10m 4.Maximum working pressuref_10bar Performance range Flow rate up to 40 l/min.(2.4m3/h) (head up to 38m Operating limits (suction lift up to 10m (fluid temperature up to 60fpc (maximum ambient temperature 40fp
Suction/Discharge port dia (mm) 50(2") Max. Capacity (M3/hr) 36 Engine Speed (rpm) 3000 Engine Cont. output (hp) 3.8 Engine Displacement (cc) 211 Fuel Tank Capacity (L) 2.5 Unit Dimensions (L x W x H) (mm) 560x470x565 Unit Net Weight (kg) 38
Hand pumps Afridev deep well hand pump as per skat 2/1994, 3/1998 /4/2004. - upto 45 mtrs depth with discharge of 16.5 liters in a minute. India mark ii deep well hand pump as per is:9301/1990. - upto 45 mtrs depth with discharge of 15 liters in a minute. India mark iii [vlom] deep well hand pump as per is:13056/1991. - upto 45 mtrs depth with discharge of 15 liters in a minute. Extra deep well hand pumps as per is:13287/1992. - upto 90 mtrs depth with discharge of 12 liters in a minute. Unicef approved vlom 50 deep well hand pump. - upto 45 mtrs depth with discharge of 15 liters in a minute. 3m uganda mark 3 handpump as perskt specifications. Ghana modified india mark ii handpump. Mild steel bar /rods and s.S. Rods / bars To be given against specific consignment/requirements. Goods packedin export worthy packing
Structural characteristics Unique motor design Delrin impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Stainless steel body Carbon bush Stainless steel thrust ring Stainless shaft , strainer and coupling Operating conditions Clean water not containing abrasive particles Liquid temperature up to 35ª c The cooling media temperature should not be more than 40ª c Motor 2-pole, single phase, 50 hz, 220-240 v Insulation class b Protection ip 57
Comins water pump
Submersible pump set 20 to 35 kg. 1 pies packing
Water cooler pump with 1" stamping. Stamping is of the material of crc. Shaft consists of en8 material. 12 Pcs.
Hello. For submersible pumps, we have Water Submersible Pumps, Submersible Pumps, Fountain Pumps, Centrifugal Pumps. We cover a wide range of products across all industries. However, we do have benchmark industries, including automotive, CNC machinery, hardware accessories and tools, raw materials, and more. Feel free to send RFQ about these with details : 1. Product name, specs, qty, usage. 2. Special inquiries (Ie. Machining, customization) must include drawing or 3D files. 3. Estimated price/target price: 3. Buyer name : Company name (if any) : Email address : Phone number : Regards, Listyawati
Pumps,Water pumps
Tobee G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life. Design Features: The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required. Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimining suction side recirculation. Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces. The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. (Except the 6/4 DG which has two components) Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts. A unique -10 (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all warman pumps
diesel engine water pump is used for industrial and city clean water supply and drainage, irrigation, fire protection, long distance water supply, metallurgy, chemical, textile, china processing, pigment, paper making, etc.
1. Accurately improved air pressure sensor and shutting off automatically at desired pressure to avoid over inflation; upgraded digital chip sensor which makes the error smaller and it stops automatically when the set value reaches. 2. A variety of presets, with five scene presets and four air pressure units, one-key switching. 3. Upgraded backlight of all buttons, added several LEDs next to the operation buttons, and lightened screen and buttons when they are turned on, making it more convenient to operate at night. 4. Lamp panel with lighting design, upgraded 19�?13.5mm lamp panel lighting, farewells small lamp bead low lumen. You can use it as an air pump and a flashlight. 5. Three lighting modes, the first long press to turn on the light (white light is always on), long press the second long press to turn on the warning light (red light strobes at low frequency ), the third long press to turn on theSOS distress light (red light SOS strobes). 6. The sink design of anti-scald inflatable port , which can reduce the probability of scald event to some extent.Because the temperature of the inflatable port can reach 120 �°C when inflating. 7. Upgraded ventilation system; increase the ventilation area, which is more conducive to internal heat dissipation and makes the work more stable. 8. Emergency external charging, equipped with USB power output interface, which can be used as a temporary power bank.
1. Metal cylinder, pure copper motor; core drive, surging power, stable output and long life. 2. Integrated storage can keep neat and orderly to avoid entanglement of the power cord when not in use. 3. Highlight lights easy to inflate at night and light under special circumstances. 4. Nylon braided, wear-resistant inflatable tube; four-layer braided reinforcement structure, wear-resistant, anti-freeze, explosion-proof, high temperature resistant. 5. Upgraded overload protection;safety does not hurt the car; fuse double protection, power-off protection for the overload short circuit. 6. Small body, 95 mm width, which can be put into the armrest box, backpack side pocket, clothes pocket, etc, is convenient to use.
Please contact us for more information
Hydraulic Oil Pump Rated pressure:10000psi Flow rate at 1500rpm:0.64L/min Inlet port:1/2 FNPT Outlet port: 1/4FNPT This pump is a plunger pump, it needs to be driven by a motor and recommend using electric motor. It requires very little power, so solar energy can be used as an energy source for its motor. These pumps are used on wellhead control panel systems, Power packs on high-torque service tools. The pump application medium is hydraulic oil and it needs to be installed at a lower position than the tank. Before staring the pump, you must vent the air in the pump chamber.
