Arcing is eliminated. Connect the red battery clamp to the positive battery terminal. Connect the black Clamp to the negative or ground to a rigid metallic surface on the engine. The connection should be 12 to 19 inches from the battery. 4.Hose: Since the pump has a lower discharge pressure it is ., recommended that anoncolapsiable hose be used for maximum pumping capacity. 5.Hoisting & lowering: Use the attached nylon line. Do not use the power cord ., for handling the unit. 6.Operation of unit: Lower the unit into the liquid to be pumped(note: this unit is not to used to pump Flamable liquids).Then turn on the switch. Pump can be run for a few minutes(less than 5) without liquid. Do not run completely dry for any extended period(less than 5 min.).This will prevent. 7.Running time peroids: The unit draws 20-25 amperes and can be operated for approximately 1 hr. On a fully charged 60 amp-hour battery and still be able to start the vehicle under normal conditions. Caution should be used when running times exceeds 25 !v 30 minutes without the engine running to recharge the battery. Also be mindful of cold temperatures which lowers battery
Spe3 series 1/3 hp effluent pumps 1.1/2" solids handling 2.Heavy duty lip & mechanical seals in tandem 3.115 & 230 volts available 4.60hz 5.Durable cast iron motor housing 6.115 & 230 volt piggyback power plug and switch Plug w/20' cord as standard
Dsgp1-2021-60hz Dsgp1-2023-60hz 2 hp grinder pump 1.Double mechanical seal 2.Silicon carbide (main) !v grit 3.Resistant 4.Carbon ceramic (secondary) 5.Dual sealing chambers with 6.Moisture detection for optimum 7.Motor protection ductile iron 8.Impeller, recessed, clog-free 9.30 year proven design 10.Stainless steel grinder assembly 11.Effectively macerates domestic 12.Into a fine slurry
Dshhgp1-2021-60hz 2 hp grinder pump 1.Ideal for long discharge runs or high static heads 2.2 piece motor housing 3.Separate cord cap assembly 4.Internal capacitors - no control box req'd ductile iron impeller, recessed, clog-free dual silicon carbide seal - grit resistant stainless steel grinder assembly effectively macerates domestic sewage into a fine slurry 5.30 year proven design
Digp-7023/7043-60hz (patented) 1.Available with 2.7.5 hp grinder pump 3.High head, double stage 4.Doubled output pressure 5.Unmatched performance 6.350 shut-off head 7.Flows to 100 gpm 8.Balanced design 9.Ideal for long discharge runs or high static 10.Heads 11.Potentially replaces higher hp pumps 12.Ductile iron impeller, recessed, clog-free 13.Silicon carbide seals !v grit resistant
7w 9w 12w air cooler pump for mideast market. Popular in iraq Long life good quality best price According to your requirements
Submersible water pump for evaporative air cooler Good quality long life According to your requirements
The mud pump to the crank connecting rod structure , triplex single acting piston horizontal pump, piston for lip sealing, made of rubber or ptfe and nylon mat pressing and into The pump adopts the automobile gearbox, variable five flow, equipped with seismic pressure gauge and necessary spare parts, disassembling tools Rated flow 250 145 90 52260 167 106 60 35 Piston reciprocating frequency 200 116 72 42187 121 76 43 25 Suction pipe size ¦õ76¦õ89 Drain pipe size ¦õ51¦õ50 Electric motor Model Ybk2-160l-4Ybk2-225m-4 Power 1545 Rotate speed 1440 Quality7602177 Outline size1540¡á1220¡á9502910¡á1318¡á891
Fully mechanized working face double-drum shearer with high-pressure water spray out the dust Reduce air in working face of coal dust, improve working conditions in the working face The pump station is composed of two spray pump and a water tank, one of the pump work, the other a standby pump
Stable property 2.Large flow 3.Operation reliable Description: using double-drum shearer in the working face with high pressure spray dust extinguishing water, to reduce air in working face of coal dust, improve working conditions in the working face pumping station is composed of two spray pump and a water tank, one of the pump work, the other a standby pump compared with the xpb type spray pump station; with reliable work. The advantages of stable performance Model Bpw315/10 Bpw315/16 Working pressure (mpa) 10 16
Washing fluid for mud , rinsing , coal mine water The sediment concentration is not more than 4%, impurity particles slime water of not greater than 2 mm The pump is mainly with zlj series coal mine tunnel drilling rig, and filling and emptying system with other systems Model 2nb/50-1.5 Revolving speed 940(r/min) Weight 180kgs Dimension 1054¡á353¡á645mm
Motor is wet type submersible motor, simple structure High strength water resistant insulation nails, winding wires, strong water resistance, insulation performance is good Pumps installed directly on the motor shaft, compact structure small volume, light weight, high efficiency and reliable operation Bearing with high wear-resistant copper alloy sliding bearing and stainless steel shaft sleeve, and guarantee the motor run smoothly without noise, long service life 7QS10-120-7.5101207.51.5" 8QS10-144-7.5101447.51.5" 9QS15-26-2.215262.21.5" 10QS15-52-4155241.5" 11QS20-30-3203032" 12QS20-45-4204542" 13QS20-54-5.520545.52" 14QS20-67-7.520677.52" 15QS20-81-7.520817.52" 16QS25-17-2.225172.22" 17QS25-26-3252632" 18QS25-34-4253442" 19QS25-45-5.525455.52" 20QS32-26-4322643" 21QS32-39-5.532395.53" 22QS32-52-7.532527.53" 23QS40-16-3401633" 24QS40-21-4402143" 25QS40-25-5.540255.53" 26QS40-30-5.540305.53" 27QS40-40-7.540407.54" 28QS65-7-2.26572.24" 29QS65-10-3651034" 30QS65-18-5.565185.54" 31QS65-25-7.565257.54" 32QS80-13-4801344" 33QS80-16-5.580165.54" 34QS80-22-7.580227.54" 35QS100-4.5-2.21004.52.24" 36QS100-9-4100944" 37QS100-12-5.5100125.54" 38QS100-17-7.5100177.54" 39QS120-10-5.5120105.55" 40QS125-12-7.5125127.55" 41QS150-10-7.5150107.55" 42QS160-4-3160435" 43QS250-5-5.525055.55"
Technical parameters: Rated voltage: 220v-240v, 110v-120v, 110v-240v Frequency: 50/60hz Max.Current: 10a Max. Power: 1.1kw, 1.5kw Starting pressure setting: 1.2bar, 1.5bar, 2.2bar Max.Working pressure: 10bar Connection thread: r1" Protection rating: ip65 Max.Working temperature: 60c 12 pieces per box.
Infusion pump :znb-xd Launched in 1994, the first chinese-made infusion pump . m, low pressure Additional features: Real-time shift totals, automatic power switching, mute button, bolus, system malfunction Air-in-line detection: Ultrasonic detector Data interface port of infusion management system: Optional Power supply, ac: 110/230 vac, 50/60 hz, 20 va Battery :9.6+-1.6v, rechargeable Batterylife: 3 hours at the 30 ml/h Working temperature: 10-40 degree centigrade Relative humidity: 30-75% Atmospheric pressure: 700-1060 hpa Size: 174*126*215 mm Weight: 2.5 kg Safety classification: Class i, type bf International standard packing . Size :174*126*215mm Weight:2.5kg
Pump spare parts for kirloskar, ksb, mather platt, beacon weir, best crompton etc
Submersible raw water pump 175kw & 75kw to sell. Second hand - less operation time.
Slurry pump
Vibration submersible pump Operating Condition: Fluid temperature up to 35 Centigrade; Maximum ambient temperature 40 Centigrade. Maximun particale: 5mm for clean water type 1. Design for clear water. 2. Pumping head can reach 60m, flow rate can reach 380-420L/min at 40m head. 3. Single phase: 220-240v/50 Hz 4. Can be used for lifting water from wells, boreholes and reserviors, can be used for domestic water supply. 5. Cable can be 6m, 10, 16m, 25m, 40m and so on. 6. Motor Degree of protection IP68 Insulation Class B Pump body aluminium Motor body aluminium Impeller rubber Shaft 45# steel HS Code: 841381 Trademark: haitai pump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.
I: Feature: 1). Life: Expected life span is at least 20000 hours. 2) Low noise: 35dB, far from 10cm distance. 3) Duty work: The pump can sustain heavy duty work for a day, continuous operation. 4) Working conditions: Applying to indoor and outdoor under temperature 40degC. 5) Working temperature: Within 100 cent degree 6) It is waterproof but not submersible. II: Application: 1) Coffee maker 2) Tea pot 3) Fountain 4) Water circulation system III: Parameter Specification: Model: 25-01 Working voltage(VDC):4.5~12 Working current(mA): 300~350 Max-Static lift(meter): 0.7~2 Max-Static flow rate(L/Min):0.8~1.5 Temp: ¡Ü100degC Remarks: not submersible The tolerance of technical parameters above is ¡À10% and the technical parameters above is only for your reference, for more details, please feel free to contact us. Model: 25#-01 Dimension (mm): 32(Length)*26(Width)*36(Height) Inlet OD (mm):9 Outlet OD (mm):7 Remarks: both for white and black items.
32-01 brushless DC water pump I: Feature: 1). Life: Expected life span is at least 20000 hours. 2) Low noise: 35dB, far from 10cm distance. 3) Duty work: The pump can sustain heavy duty work for a day, continuous operation. 4) Working conditions: Applying to indoor and outdoor under temperature 40degC. 5) Working temperature: Within75 cent degree 6) It is waterproof, submersible. II: Application: 1. Aquarium 2. Solar energy system 3. Fountain 4. Small pond 5. Water circulation system. III: Parameter Specification: Model: 32-01 Working voltage(VDC):6~24 Working current(mA): 300~700 Max-Static lift(meter): 2~2.5 Max-Static flow rate(L/Min):3~3.5 Temp: ¡Ü75degC Remarks: submersible The tolerance of technical parameters above is ¡À10% and the technical parameters above is only for your reference, for more details, please feel free to contact us. Model: 32-01 Dimension (mm): 58(Length)*34(Width)*41(Height) Inlet OD (mm):13.8 Outlet OD (mm):8.5 Remarks: Outlet has antis lip strip.
